main
Ray
max4071aua-t: specified limits as data (metadata.characteristics, 58 rows from the datasheet)
328fd44
MAX4071AUA+T
Analog Devices Inc Maxim Integrated · Current Sense Amplifiers · MSOP-8
MAX4071AUA+T from Analog Devices Inc Maxim Integrated, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SHDN | input | Shutdown Input (active-low). Drive SHDN low to select shutdown mode (~10µA supply current). Connect SHDN to VCC for normal operation. Logic thresholds: VIL ≤ 0.6V, VIH ≥ 2V. |
| 2 | RS- | input | Negative connection to the external sense resistor (RSENSE). Differential sense input; input bias current 0 to 5µA at VCC = VRS+ = VRS- = 24V. |
| 3 | RS+ | input | Positive connection to the external sense resistor (RSENSE). Differential sense input; common-mode input range 1.35V to 24V. |
| 4 | GND | power_in | Ground reference (0V) for the device. |
| 5 | REFOUT | output | Reference Output Voltage. Internal 1.5V precision reference output (VREF typ 1.5V, min 1.47V, max 1.53V at VCC = 12V). Can source up to 500µA and sink up to 100µA. Keep total capacitance on REFOUT under 500pF for stability. |
| 6 | OUT | output | Voltage Output. The difference voltage VOUT - VREF is proportional to the differential voltage between RS+ and RS- (VSENSE × AV) and indicates the current-flow polarity. Typical output swing: VCC-VOH ≈ 65mV, VOL ≈ 5mV. |
| 7 | VCC | power_in | Supply Voltage Input, 2.7V to 24V. Typical supply current 100µA (max 250µA). Bypass VCC to GND with a 0.1µF capacitor. |
| 8 | GSEL | input | Gain-Setting Input. Connect GSEL to GND (low) to select gain = 50V/V, or to VCC (high) to select gain = 100V/V. Logic thresholds: VIL ≤ 0.6V, VIH ≥ 2V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | MSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Ordering variants
Same part, different packaging or reel option.
MAX4071AUA+TMAX4071AUA+TATA+
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range (MAX4069/MAX4071/MAX4072) | VCC | 2.7 | 24 | V | Note 4 applies to MAX4069/MAX4071/MAX4072 | 2 | |
| Input-Referred Offset Voltage | VOS | 0.08 | 0.25 | mV | VCC = VRS+ = VRS- = 12V, TA = +25°C | 2 | |
| Input-Referred Offset Voltage | VOS | 0.8 | mV | VCC = VRS+ = VRS- = 12V, TA = -40°C to +85°C | 2 | ||
| Input-Referred Offset Voltage | VOS | 1 | mV | VCC = VRS+ = VRS- = 12V, TA = TMIN to TMAX | 2 | ||
| Common-Mode Input Range | CMVR | 1.35 | 24 | V | Guaranteed by CMRR test | 2 | |
| Common-Mode Rejection Ratio | CMRR | 100 | 120 | dB | 1.35V ≤ VRS+ = VRS- ≤ 24V, VCC = 12V | 2 | |
| Supply Current | ICC | 100 | 250 | µA | VCC = VRS+ = VRS- = 24V, RL = open, TA = TMIN to TMAX | 2 | |
| Shutdown Supply Current | ICC SHDN | 9 | µA | VCC = VRS+ = VRS- = 5.5V, SHDN = GND, TA = +25°C | 2 | ||
| Shutdown Supply Current | ICC SHDN | 10 | 30 | µA | VCC = VRS+ = VRS- = 24V, SHDN = GND | 2 | |
| Leakage Current | 0.1 | 0.5 | µA | VRS+ = VRS- = 24V, VCC = 0V | 2 | ||
| Input Bias Current | IRS+, IRS- | 0 | 2.4 | 5 | µA | VCC = VRS+ = VRS- = 24V | 2 |
| Recommended Full-Scale Sense Voltage, Gain = 50V/V | VSENSE | 75 | mV | Gain = 50V/V | 2 | ||
| Recommended Full-Scale Sense Voltage, Gain = 100V/V | VSENSE | 50 | mV | Gain = 100V/V | 2 | ||
| Total OUT Voltage Error, gain 50 | -1 | 0.25 | 1 | % | VSENSE = 75mV, VCC = VRS+ = 12V, gain = 50, TA = +25°C | 3 | |
| Total OUT Voltage Error, gain 50 | -1.5 | 1.5 | % | VSENSE = 75mV, VCC = VRS+ = 12V, gain = 50, TA = -40°C to +85°C | 3 | ||
| Total OUT Voltage Error, gain 50 | -2 | 2 | % | VSENSE = 75mV, VCC = VRS+ = 12V, gain = 50, TA = TMIN to TMAX | 3 | ||
| Total OUT Voltage Error, gain 100 | -1 | 0.25 | 1 | % | VSENSE = 50mV, VCC = VRS+ = 12V, gain = 100, TA = +25°C | 3 | |
| Total OUT Voltage Error, gain 100 | -1.5 | 1.5 | % | VSENSE = 50mV, VCC = VRS+ = 12V, gain = 100, TA = -40°C to +85°C | 3 | ||
| Total OUT Voltage Error, gain 100 | -2.5 | 2.5 | % | VSENSE = 50mV, VCC = VRS+ = 12V, gain = 100, TA = TMIN to TMAX | 3 | ||
| Total OUT Voltage Error (MAX4071) | -2.5 | 1 | 2.5 | % | VSENSE = -15mV, VCC = VRS+ = 12V, gain = 50, TA = +25°C | 3 | |
| Total OUT Voltage Error (MAX4071) | -4 | 4 | % | VSENSE = -15mV, VCC = VRS+ = 12V, gain = 50, TA = -40°C to +85°C | 3 | ||
| Total OUT Voltage Error (MAX4071) | -6 | 6 | % | VSENSE = -15mV, VCC = VRS+ = 12V, gain = 50, TA = TMIN to TMAX | 3 | ||
| Total OUT Voltage Error (MAX4071) | -5 | 2 | 5 | % | VSENSE = -7.5mV, VCC = VRS+ = 12V, gain = 100, TA = +25°C | 3 | |
| Total OUT Voltage Error (MAX4071) | -10 | 10 | % | VSENSE = -7.5mV, VCC = VRS+ = 12V, gain = 100, TA = -40°C to +85°C | 3 | ||
| Total OUT Voltage Error (MAX4071) | -15 | 15 | % | VSENSE = -7.5mV, VCC = VRS+ = 12V, gain = 100, TA = TMIN to TMAX | 3 | ||
| Total OUT Voltage Error at small sense voltage | -3 | 3 | % | VSENSE = 3mV, VCC = 12V, VRS+ = 12V, TA = +25°C | 3 | ||
| OUT Voltage High | VCC - VOH | 65 | 150 | mV | IOUT = 10µA, VSENSE = 100mV, VRS+ = VCC, MAX4071, VCC = 2.7V | 4 | |
| OUT Voltage High | VCC - VOH | 90 | 250 | mV | IOUT = 500µA, VSENSE = 100mV, VRS+ = VCC, MAX4071, VCC = 2.7V | 4 | |
| OUT Voltage Low | VOL | 5 | 20 | mV | IOUT = -10µA, VSENSE = -100mV, VRS+ = VCC, MAX4071, VCC = 2.7V | 4 | |
| OUT Voltage Low | VOL | 100 | 250 | mV | IOUT = -500µA, VSENSE = -100mV, VRS+ = VCC, MAX4071, VCC = 2.7V | 4 | |
| -3dB Bandwidth, gain 50 | BW | 100 | kHz | VSENSE = 50mV, VCC = 12V, CL = 100pF, Gain = 50V/V | 4 | ||
| -3dB Bandwidth, gain 100 | BW | 40 | kHz | VSENSE = 50mV, VCC = 12V, CL = 100pF, Gain = 100V/V | 4 | ||
| Gain, GSEL = GND | AV | 50 | V/V | GSEL = GND | 4 | ||
| Gain, GSEL = VCC | AV | 100 | V/V | GSEL = VCC | 4 | ||
| Capacitive-Load Stability | 100 | pF | 4 | ||||
| Power-Supply Rejection Ratio | PSRR | 100 | 120 | dB | VCC = 2.7V to 24V (MAX4069/MAX4071/MAX4072) | 4 | |
| Logic Low Voltage (GSEL, SHDN) | VIL | 0.6 | V | VCC = 3.6V or 24V | 4 | ||
| Logic High Voltage (GSEL, SHDN) | VIH | 2 | V | VCC = 3.6V or 24V | 4 | ||
| Gain-Select Input Current | IGSEL | 0.01 | 1 | µA | GSEL = VCC = 24V or GND | 4 | |
| Shutdown Input Current, SHDN = VCC | ISHDN | 3 | 12 | µA | SHDN = VCC = 24V | 4 | |
| Shutdown Input Current, SHDN = GND | ISHDN | 0.01 | 1 | µA | SHDN = GND, VCC = 24V | 4 | |
| Reference Output Voltage (MAX4071) | VREF | 1.47 | 1.5 | 1.53 | V | VCC = 12V, TA = +25°C | 5 |
| Reference Output Voltage (MAX4071) | VREF | 1.44 | 1.56 | V | VCC = 12V, TA = TMIN to TMAX | 5 | |
| Reference Output Voltage Temperature Coefficient | TCVREF | 15 | ppm/°C | VCC = 12V, -40°C ≤ TA ≤ +85°C | 5 | ||
| Reference Output Voltage Temperature Coefficient | TCVREF | 20 | ppm/°C | VCC = 12V, TA = TMIN to TMAX | 5 | ||
| Load Regulation | ΔVREFOUT/ΔIREF | 2 | mV/mA | IREFOUT = 0 to 500µA | 5 | ||
| Load Regulation | ΔVREFOUT/ΔIREF | 4 | mV/mA | IREFOUT = 0 to -100µA | 5 | ||
| Line Regulation | ΔVREF/ΔVCC | 20 | µV/V | 2.7V ≤ VCC ≤ 24V | 5 | ||
| REF Capacitive-Load Stability | 500 | pF | 5 | ||||
| Operating Temperature Range | TA | -40 | 125 | °C | 2 | ||
| VCC, RS+, RS- to GND | VCC, RS+, RS- | -0.3 | 26 | V | to GND | 2 | |
| OUT to GND (lesser of VCC + 0.3V or 15V) | OUT | -0.3 | 15 | V | Max is the lesser of (VCC + 0.3V) or 15V | 2 | |
| Differential Input Voltage (VRS+ - VRS-) | VRS+ - VRS- | -0.3 | 0.3 | V | 2 | ||
| GSEL, SHDN, REFOUT, ADJ to GND | -0.3 | V | Max is VCC + 0.3V | 2 | |||
| Current into Any Pin | -20 | 20 | mA | 2 | |||
| Junction Temperature | TJ | 150 | °C | 2 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Lead Temperature | 300 | °C | Soldering, 10s | 2 |
CAD (KiCad official)
- Symbol:
MAX4071AUA+T - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
max4071aua-t-etched.step/max4071aua-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max4071aua-t.step/max4071aua-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc Maxim Integrated datasheet (14 pp, sha256
8d61f10c87aaaae2, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MAX4071AUA+T
**Analog Devices Inc Maxim Integrated** · Current Sense Amplifiers · MSOP-8
MAX4071AUA+T from Analog Devices Inc Maxim Integrated, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SHDN | input | Shutdown Input (active-low). Drive SHDN low to select shutdown mode (~10µA supply current). Connect SHDN to VCC for normal operation. Logic thresholds: VIL ≤ 0.6V, VIH ≥ 2V. |
| 2 | RS- | input | Negative connection to the external sense resistor (RSENSE). Differential sense input; input bias current 0 to 5µA at VCC = VRS+ = VRS- = 24V. |
| 3 | RS+ | input | Positive connection to the external sense resistor (RSENSE). Differential sense input; common-mode input range 1.35V to 24V. |
| 4 | GND | power_in | Ground reference (0V) for the device. |
| 5 | REFOUT | output | Reference Output Voltage. Internal 1.5V precision reference output (VREF typ 1.5V, min 1.47V, max 1.53V at VCC = 12V). Can source up to 500µA and sink up to 100µA. Keep total capacitance on REFOUT under 500pF for stability. |
| 6 | OUT | output | Voltage Output. The difference voltage VOUT - VREF is proportional to the differential voltage between RS+ and RS- (VSENSE × AV) and indicates the current-flow polarity. Typical output swing: VCC-VOH ≈ 65mV, VOL ≈ 5mV. |
| 7 | VCC | power_in | Supply Voltage Input, 2.7V to 24V. Typical supply current 100µA (max 250µA). Bypass VCC to GND with a 0.1µF capacitor. |
| 8 | GSEL | input | Gain-Setting Input. Connect GSEL to GND (low) to select gain = 50V/V, or to VCC (high) to select gain = 100V/V. Logic thresholds: VIL ≤ 0.6V, VIH ≥ 2V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | MSOP-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
## Ordering variants
Same part, different packaging or reel option.
- `MAX4071AUA+T`
- `MAX4071AUA+TATA+`
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range (MAX4069/MAX4071/MAX4072) | VCC | 2.7 | | 24 | V | Note 4 applies to MAX4069/MAX4071/MAX4072 | 2 |
| Input-Referred Offset Voltage | VOS | | 0.08 | 0.25 | mV | VCC = VRS+ = VRS- = 12V, TA = +25°C | 2 |
| Input-Referred Offset Voltage | VOS | | | 0.8 | mV | VCC = VRS+ = VRS- = 12V, TA = -40°C to +85°C | 2 |
| Input-Referred Offset Voltage | VOS | | | 1 | mV | VCC = VRS+ = VRS- = 12V, TA = TMIN to TMAX | 2 |
| Common-Mode Input Range | CMVR | 1.35 | | 24 | V | Guaranteed by CMRR test | 2 |
| Common-Mode Rejection Ratio | CMRR | 100 | 120 | | dB | 1.35V ≤ VRS+ = VRS- ≤ 24V, VCC = 12V | 2 |
| Supply Current | ICC | | 100 | 250 | µA | VCC = VRS+ = VRS- = 24V, RL = open, TA = TMIN to TMAX | 2 |
| Shutdown Supply Current | ICC SHDN | | 9 | | µA | VCC = VRS+ = VRS- = 5.5V, SHDN = GND, TA = +25°C | 2 |
| Shutdown Supply Current | ICC SHDN | | 10 | 30 | µA | VCC = VRS+ = VRS- = 24V, SHDN = GND | 2 |
| Leakage Current | | | 0.1 | 0.5 | µA | VRS+ = VRS- = 24V, VCC = 0V | 2 |
| Input Bias Current | IRS+, IRS- | 0 | 2.4 | 5 | µA | VCC = VRS+ = VRS- = 24V | 2 |
| Recommended Full-Scale Sense Voltage, Gain = 50V/V | VSENSE | | 75 | | mV | Gain = 50V/V | 2 |
| Recommended Full-Scale Sense Voltage, Gain = 100V/V | VSENSE | | 50 | | mV | Gain = 100V/V | 2 |
| Total OUT Voltage Error, gain 50 | | -1 | 0.25 | 1 | % | VSENSE = 75mV, VCC = VRS+ = 12V, gain = 50, TA = +25°C | 3 |
| Total OUT Voltage Error, gain 50 | | -1.5 | | 1.5 | % | VSENSE = 75mV, VCC = VRS+ = 12V, gain = 50, TA = -40°C to +85°C | 3 |
| Total OUT Voltage Error, gain 50 | | -2 | | 2 | % | VSENSE = 75mV, VCC = VRS+ = 12V, gain = 50, TA = TMIN to TMAX | 3 |
| Total OUT Voltage Error, gain 100 | | -1 | 0.25 | 1 | % | VSENSE = 50mV, VCC = VRS+ = 12V, gain = 100, TA = +25°C | 3 |
| Total OUT Voltage Error, gain 100 | | -1.5 | | 1.5 | % | VSENSE = 50mV, VCC = VRS+ = 12V, gain = 100, TA = -40°C to +85°C | 3 |
| Total OUT Voltage Error, gain 100 | | -2.5 | | 2.5 | % | VSENSE = 50mV, VCC = VRS+ = 12V, gain = 100, TA = TMIN to TMAX | 3 |
| Total OUT Voltage Error (MAX4071) | | -2.5 | 1 | 2.5 | % | VSENSE = -15mV, VCC = VRS+ = 12V, gain = 50, TA = +25°C | 3 |
| Total OUT Voltage Error (MAX4071) | | -4 | | 4 | % | VSENSE = -15mV, VCC = VRS+ = 12V, gain = 50, TA = -40°C to +85°C | 3 |
| Total OUT Voltage Error (MAX4071) | | -6 | | 6 | % | VSENSE = -15mV, VCC = VRS+ = 12V, gain = 50, TA = TMIN to TMAX | 3 |
| Total OUT Voltage Error (MAX4071) | | -5 | 2 | 5 | % | VSENSE = -7.5mV, VCC = VRS+ = 12V, gain = 100, TA = +25°C | 3 |
| Total OUT Voltage Error (MAX4071) | | -10 | | 10 | % | VSENSE = -7.5mV, VCC = VRS+ = 12V, gain = 100, TA = -40°C to +85°C | 3 |
| Total OUT Voltage Error (MAX4071) | | -15 | | 15 | % | VSENSE = -7.5mV, VCC = VRS+ = 12V, gain = 100, TA = TMIN to TMAX | 3 |
| Total OUT Voltage Error at small sense voltage | | -3 | | 3 | % | VSENSE = 3mV, VCC = 12V, VRS+ = 12V, TA = +25°C | 3 |
| OUT Voltage High | VCC - VOH | | 65 | 150 | mV | IOUT = 10µA, VSENSE = 100mV, VRS+ = VCC, MAX4071, VCC = 2.7V | 4 |
| OUT Voltage High | VCC - VOH | | 90 | 250 | mV | IOUT = 500µA, VSENSE = 100mV, VRS+ = VCC, MAX4071, VCC = 2.7V | 4 |
| OUT Voltage Low | VOL | | 5 | 20 | mV | IOUT = -10µA, VSENSE = -100mV, VRS+ = VCC, MAX4071, VCC = 2.7V | 4 |
| OUT Voltage Low | VOL | | 100 | 250 | mV | IOUT = -500µA, VSENSE = -100mV, VRS+ = VCC, MAX4071, VCC = 2.7V | 4 |
| -3dB Bandwidth, gain 50 | BW | | 100 | | kHz | VSENSE = 50mV, VCC = 12V, CL = 100pF, Gain = 50V/V | 4 |
| -3dB Bandwidth, gain 100 | BW | | 40 | | kHz | VSENSE = 50mV, VCC = 12V, CL = 100pF, Gain = 100V/V | 4 |
| Gain, GSEL = GND | AV | | 50 | | V/V | GSEL = GND | 4 |
| Gain, GSEL = VCC | AV | | 100 | | V/V | GSEL = VCC | 4 |
| Capacitive-Load Stability | | | | 100 | pF | | 4 |
| Power-Supply Rejection Ratio | PSRR | 100 | 120 | | dB | VCC = 2.7V to 24V (MAX4069/MAX4071/MAX4072) | 4 |
| Logic Low Voltage (GSEL, SHDN) | VIL | | | 0.6 | V | VCC = 3.6V or 24V | 4 |
| Logic High Voltage (GSEL, SHDN) | VIH | 2 | | | V | VCC = 3.6V or 24V | 4 |
| Gain-Select Input Current | IGSEL | | 0.01 | 1 | µA | GSEL = VCC = 24V or GND | 4 |
| Shutdown Input Current, SHDN = VCC | ISHDN | | 3 | 12 | µA | SHDN = VCC = 24V | 4 |
| Shutdown Input Current, SHDN = GND | ISHDN | | 0.01 | 1 | µA | SHDN = GND, VCC = 24V | 4 |
| Reference Output Voltage (MAX4071) | VREF | 1.47 | 1.5 | 1.53 | V | VCC = 12V, TA = +25°C | 5 |
| Reference Output Voltage (MAX4071) | VREF | 1.44 | | 1.56 | V | VCC = 12V, TA = TMIN to TMAX | 5 |
| Reference Output Voltage Temperature Coefficient | TCVREF | | 15 | | ppm/°C | VCC = 12V, -40°C ≤ TA ≤ +85°C | 5 |
| Reference Output Voltage Temperature Coefficient | TCVREF | | 20 | | ppm/°C | VCC = 12V, TA = TMIN to TMAX | 5 |
| Load Regulation | ΔVREFOUT/ΔIREF | | 2 | | mV/mA | IREFOUT = 0 to 500µA | 5 |
| Load Regulation | ΔVREFOUT/ΔIREF | | 4 | | mV/mA | IREFOUT = 0 to -100µA | 5 |
| Line Regulation | ΔVREF/ΔVCC | | 20 | | µV/V | 2.7V ≤ VCC ≤ 24V | 5 |
| REF Capacitive-Load Stability | | | | 500 | pF | | 5 |
| Operating Temperature Range | TA | -40 | | 125 | °C | | 2 |
| VCC, RS+, RS- to GND | VCC, RS+, RS- | -0.3 | | 26 | V | to GND | 2 |
| OUT to GND (lesser of VCC + 0.3V or 15V) | OUT | -0.3 | | 15 | V | Max is the lesser of (VCC + 0.3V) or 15V | 2 |
| Differential Input Voltage (VRS+ - VRS-) | VRS+ - VRS- | -0.3 | | 0.3 | V | | 2 |
| GSEL, SHDN, REFOUT, ADJ to GND | | -0.3 | | | V | Max is VCC + 0.3V | 2 |
| Current into Any Pin | | -20 | | 20 | mA | | 2 |
| Junction Temperature | TJ | | | 150 | °C | | 2 |
| Storage Temperature Range | TSTG | -65 | | 150 | °C | | 2 |
| Lead Temperature | | | | 300 | °C | Soldering, 10s | 2 |
## CAD (KiCad official)
- Symbol: `MAX4071AUA+T`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `max4071aua-t-etched.step` / `max4071aua-t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max4071aua-t.step` / `max4071aua-t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices Inc Maxim Integrated datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590005534977134592) (14 pp, sha256 `8d61f10c87aaaae2`, retrieved 2026-08-17, tier: lcsc)
- **Extractor:** `ds2sf` (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/max4071aua-t-datasheet.pdf)