Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
MAX38909ATD+
Maxim Integrated · Linear Voltage Regulators (LDO) · TDFN-14(3x3)
MAX38909ATD+ from Maxim Integrated, in a TDFN-14(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Regulator supply input, to be connected to a voltage between 0.9V and 5.5V and bypassed with a 22μF ceramic capacitor from IN to GND. |
| 2 | IN | power_in | Regulator supply input, to be connected to a voltage between 0.9V and 5.5V and bypassed with a 22μF ceramic capacitor from IN to GND. |
| 3 | IN | power_in | Regulator supply input, to be connected to a voltage between 0.9V and 5.5V and bypassed with a 22μF ceramic capacitor from IN to GND. |
| 4 | IN | power_in | Regulator supply input, to be connected to a voltage between 0.9V and 5.5V and bypassed with a 22μF ceramic capacitor from IN to GND. |
| 5 | BIAS | power_in | Bias supply input, to be connected to a voltage between 2.7V and 20V and bypassed with a 1μF capacitor to GND, and must be at least 2.0V above the VOUT target. |
| 6 | EN | input | Enable input: a logic high (VEN high) enables the regulator output and a logic low (VEN low) disables it, and it can be tied to BIAS to keep the output always enabled. |
| 7 | GND | power_in | Regulator ground, to which the IN and OUT bypass capacitor grounds should be returned for best performance. |
| 8 | POK | output | Open-drain power-OK (power-on reset) output that requires a pullup resistor (10kΩ to 100kΩ) to an external supply and goes high once the output reaches its regulation target. |
| 9 | FB | input | Output voltage feedback input, connected to a resistor divider across OUT and GND with its center tap at this pin to set any output voltage between 0.6V and 5.0V. |
| 10 | BYP | input | Bypass capacitor input, to which a 0.001μF to 0.1μF capacitor is connected between OUT and BYP to reduce output noise and set the soft-start rate. |
| 11 | OUT | power_out | Regulator output that sources up to 2A at the regulation voltage, is bypassed with a 22μF ceramic capacitor to GND, and is pulled low through 70Ω when the regulator is disabled. |
| 12 | OUT | power_out | Regulator output that sources up to 2A at the regulation voltage, is bypassed with a 22μF ceramic capacitor to GND, and is pulled low through 70Ω when the regulator is disabled. |
| 13 | OUT | power_out | Regulator output that sources up to 2A at the regulation voltage, is bypassed with a 22μF ceramic capacitor to GND, and is pulled low through 70Ω when the regulator is disabled. |
| 14 | OUT | power_out | Regulator output that sources up to 2A at the regulation voltage, is bypassed with a 22μF ceramic capacitor to GND, and is pulled low through 70Ω when the regulator is disabled. |
| 15 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Maxim Integrated |
| Package | TDFN-14(3x3) |
| Category | Power Supply Chip |
| Pins | 15 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage Range | VIN | 0.9 | 5.5 | V | Guaranteed by output accuracy, VOUT < VIN - VDO | 6 | |
| Bias Voltage Range | VBIAS | 2.7 | 20 | V | 7 | ||
| Input Undervoltage Lockout | VIN_UVLO | 0.35 | 0.45 | 0.55 | V | VIN rising, 60mV hysteresis | 7 |
| Bias Undervoltage Lockout | VBIAS_UVLO | 2.45 | 2.55 | 2.65 | V | VBIAS rising, 100mV hysteresis | 7 |
| Output Voltage Range | VOUT | 0.6 | 5 | V | Guaranteed by output accuracy | 7 | |
| Output Capacitance | COUT | 10 | 22 | μF | Effective capacitance required for stability and proper operation | 7 | |
| Input Supply Current | IQ | 70.5 | 150 | μA | VEN = 3.6V, VBIAS = 5.0V, IOUT = 0mA | 7 | |
| Input Shutdown Current | ISD | 0.001 | 1 | μA | VEN = 0V, TJ = +25°C | 7 | |
| Input Shutdown Current | ISD | 1 | μA | VEN = 0V, TJ = +125°C | 7 | ||
| Bias Supply Current | IBIAS | 1.5 | 4 | mA | VEN = 3.3V, VBIAS = 5.0V, IOUT = 0mA | 7 | |
| Bias Shutdown Current | IBIAS_SD | 0.75 | 4 | μA | VEN = 0V | 7 | |
| Feedback Voltage Accuracy | VFB | 0.594 | 0.6 | 0.606 | V | IOUT from 10mA to 2A, VIN from VOUT + 0.3V to 5.5V, VBIAS > 2.7V, VBIAS from VOUT + 2V to 20V, VOUT from 0.6V to 5.0V | 7 |
| Dropout Voltage | VDO | 36 | 80 | mV | IOUT = 2A, VOUT_NOM = 1.2V, VBIAS = 5.0V, TDFN | 7 | |
| Dropout Voltage | VDO | 50 | 100 | mV | IOUT = 2A, VOUT_NOM = 1.2V, VBIAS = 3.3V, TDFN | 7 | |
| Current Limit | ILIM | 2.2 | 2.8 | 3.4 | A | VOUTS/OUT = 0.9 x VOUT_NOM, VIN - VOUT = 300mV | 7 |
| EN Input Threshold High | VIH | 1 | 1.6 | V | EN rising | 8 | |
| EN Input Threshold Low | VIL | 0.4 | 0.9 | V | EN falling | 8 | |
| EN Input Leakage Current | IEN_LK | -1 | 0.001 | 1 | μA | VEN from 0V to 5.5V, VBIAS from 8V to 20V, TA = +25°C | 8 |
| POK Threshold | VOUT | 88 | 91 | 94 | % | VOUT rising (POK switches) | 8 |
| POK Voltage, Low | VOL | 10 | 100 | mV | IPOK = 1mA | 8 | |
| POK Leakage Current | IPOK_LK | -1 | 0.001 | 1 | μA | VPOK = 5.5V, TA = +25°C | 8 |
| BYP Capacitor Range | CBYP | 0.001 | 0.1 | μF | Regulator remains stable; guaranteed by design | 8 | |
| IN, FB, OUT, BYP, POK to GND | -0.3 | 6 | V | 6 | |||
| BIAS to GND | -0.3 | 22 | V | 6 | |||
| EN to GND | -0.3 | V | Upper limit printed as VBIAS + 0.3V | 6 | |||
| Continuous Power Dissipation, TDFN | 1951.2 | mW | TA = +70°C, derate 24.4mW/°C | 6 | |||
| Maximum Junction Temperature | TJ | 150 | °C | 6 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 6 | ||
| Lead Temperature | 300 | °C | Soldering, 10s | 6 | |||
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | 6 | ||
| Thermal Resistance Junction to Ambient, Four-Layer Board | θJA | 41 | °C/W | 14 TDFN, JESD51-7 four-layer board | 6 | ||
| Thermal Resistance Junction to Case | θJC | 8 | °C/W | 14 TDFN | 6 | ||
| Thermal Resistance Junction to Ambient, Single-Layer Board | θJA | 54 | °C/W | 14 TDFN, single-layer board | 6 |
CAD (KiCad official)
- Symbol:
MAX38909ATD+ - Footprint:
Package_DFN_QFN:DFN-14-1EP_3x3mm_P0.4mm_EP1.78x2.35mm - 3D model: TDFN-14(3x3) (KiCad packages3D, STEP)
- 3D model files:
max38909atd-etched.step/max38909atd-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max38909atd.step/max38909atd.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Maxim Integrated datasheet (20 pp, sha256
cd6742c08d5c5a9b, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).