main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers max38904batd-t: viewers · Ray
max38904batd-t-etched.glb Publish 0.1.0 · Ray
max38904batd-t-etched.step max38904batd-t: factory component page (tier=mfr) · Ray
max38904batd-t-hero.glb max38904batd-t: hero GLB from the etched model (keeps the MPN mark) · Ray
max38904batd-t-hero.overlay.json Publish 0.1.0 · Ray
max38904batd-t.glb Publish 0.1.0 · Ray
max38904batd-t.kicad_mod Publish 0.1.0 · Ray
max38904batd-t.kicad_sym Publish 0.1.0 · Ray
max38904batd-t.lbr Publish 0.1.0 · Ray
max38904batd-t.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 15 pins · Ray

MAX38904BATD+T

Maxim Integrated · Linear Voltage Regulators (LDO) · TDFN-14(3x3)

MAX38904BATD+T from Maxim Integrated, in a TDFN-14(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Regulator supply input; connect to a voltage between 1.7V and 5.5V and bypass with a 22µF capacitor from IN to GND.
2 IN power_in Regulator supply input; connect to a voltage between 1.7V and 5.5V and bypass with a 22µF capacitor from IN to GND.
3 IN power_in Regulator supply input; connect to a voltage between 1.7V and 5.5V and bypass with a 22µF capacitor from IN to GND.
4 IN power_in Regulator supply input; connect to a voltage between 1.7V and 5.5V and bypass with a 22µF capacitor from IN to GND.
5 GND power_in Regulator ground; bring the IN and OUT bypass capacitor GND connections to this pin for best performance.
6 EN input Enable input; drive high to enable or low to disable the output, connect to IN to keep the output enabled, and when low the output is shorted to GND through a 70Ω active discharge.
7 GS input Ground sense; connect GS to GND.
8 POK output Active-high open-drain power-OK output; connect a pullup resistor to a supply, it goes high after the output reaches regulation (91% typ of regulation level).
9 FB input Feedback divider input; connect a resistor divider from OUT to GND with the midpoint at this pin to set VOUT = 0.6V x (1 + R2/R1), with a 0.6V regulation voltage.
10 BYP passive Bypass capacitor input; connect a 0.001µF to 0.1µF capacitor between OUT and BYP to reduce output noise and set the soft-start rate.
11 OUT power_out Regulator output sourcing up to 2A; bypass with a 22µF (8µF minimum including derating) low-ESR (<0.03Ω) capacitor to GND.
12 OUT power_out Regulator output sourcing up to 2A; bypass with a 22µF (8µF minimum including derating) low-ESR (<0.03Ω) capacitor to GND.
13 OUT power_out Regulator output sourcing up to 2A; bypass with a 22µF (8µF minimum including derating) low-ESR (<0.03Ω) capacitor to GND.
14 OUT power_out Regulator output sourcing up to 2A; bypass with a 22µF (8µF minimum including derating) low-ESR (<0.03Ω) capacitor to GND.
15 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Maxim Integrated
Package TDFN-14(3x3)
Category Power Supply Chip
Pins 15

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage Range VIN 1.7 5.5 V Guaranteed by Output Accuracy 5
Input Undervoltage Lockout VUVLO 1.5 1.6 1.7 V VIN rising, 100mV hysteresis 5
Output Voltage Range VOUT 0.6 5 V VIN > VOUT + 0.1V 5
Output Capacitance COUT 8 22 μF For stability and proper operation 6
Supply Current IIN 1300 μA VEN = VIN = 3.6V, IOUT = 0mA 6
Shutdown Supply Current IIN 0.04 1.5 μA VEN = 0V, TA = +25°C 6
Shutdown Supply Current IIN 1.5 μA VEN = 0V, TA = 125°C 6
FB Regulation Accuracy ACC 0.594 0.6 0.606 V IOUT from 0.1mA to 2A, VIN from VOUT + 0.3V to 5.5V, VIN > 1.7V 6
Dropout Voltage 47 100 mV IOUT = 2A, VIN = 3.6V TDFN 6
Dropout Voltage 65 200 mV IOUT = 2A, VIN = 2.5V TDFN 6
Dropout Voltage 100 300 mV IOUT = 2A, VIN = 1.7V TDFN 6
Current Limit 2.2 2.8 3.4 A VOUT = 95% of Regulation, VIN = 3.6V, VIN - VOUT = 0.5V 6
BYP Capacitor Range CBYP 0.001 0.1 μF Regulator Remain Stable 6
EN Input Threshold Rising 0.8 1.2 V VIN from 1.7V to 5.5V, EN rising 6
EN Input Threshold Falling 0.4 0.7 V VIN from 1.7V to 5.5V, EN falling 6
EN Input Leakage Current -1 0.001 1 μA VEN from 1.7V to 5.5V, TA = +25ºC 6
POK Threshold, VOUT rising 88 91 94 % VOUT rising 7
POK Voltage, Low VOL 10 100 mV IPOK = 1mA 7
POK Leakage Current -0.1 0.001 0.1 μA VPOK = 5.5V, TA = +25°C 7
Load Regulation 0.032 % VIN = 2.8V, VOUT = 2.5V, IOUT from 0.1mA to 2A 6
Line Regulation 0.054 %/V VIN from 2.8V to 5.5V, VOUT = 2.5V, IOUT = 800mA 6
Active Discharge Resistance RDIS 70 Ω VEN = 0V 6
Output Noise 5.1 μVRMS IOUT = 100mA, CBYP = 100nF, f = 10Hz to 100kHz 6
BYP Soft-Start Current 50 μA From BYP to GND during startup 6
Thermal Shutdown Threshold, rising TJ 165 ºC TJ rising 7
Thermal Shutdown Threshold, falling TJ 150 ºC TJ falling 7
Voltage on IN, OUT, EN, POK, FB, GS to GND -0.3 6 V IN, OUT, SELA, SELB, EN, POK, OUTS, FB, GS to GND 5
BYP Voltage -0.3 2 V 5
Continuous Power Dissipation TDFN 1951 mW TA = +70°C, derate 24.4mW/°C above +70°C 5
Operating Temperature Range -40 125 °C 5
Maximum Junction Temperature 150 °C 5
Storage Temperature Range -65 150 °C 5
Soldering Temperature (reflow) 260 °C 5
Thermal Resistance Junction to Ambient, single-layer θJA 54 °C/W TDFN, single-layer board 5
Thermal Resistance Junction to Case, single-layer θJC 8 °C/W TDFN, single-layer board 5
Thermal Resistance Junction to Ambient, four-layer θJA 41 °C/W TDFN, four-layer board 5
Thermal Resistance Junction to Case, four-layer θJC 8 °C/W TDFN, four-layer board 5

CAD (KiCad official)

  • Symbol: MAX38904BATD+T
  • Footprint: Package_DFN_QFN:DFN-14-1EP_3x3mm_P0.4mm_EP1.78x2.35mm
  • 3D model: TDFN-14(3x3) (KiCad packages3D, STEP)
  • 3D model files: max38904batd-t-etched.step / max38904batd-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max38904batd-t.step / max38904batd-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Maxim Integrated datasheet (18 pp, sha256 599110f0423c89f9, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF