main
History Download
Ray Publish 0.1.0 4fdadc4

MAX3799ETJ+T

Maxim Integrated · Laser Drivers · TQFN-32(5x5)

MAX3799ETJ+T from Maxim Integrated, in a TQFN-32(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 LOS output Loss-of-signal open-drain output that defaults to high when the input is below the SET_LOS DAC threshold; polarity is invertible with LOS_POL = 0 and the function is disabled with LOS_EN = 0.
2 RSEL input TTL/CMOS mode-select input where logic-high selects high-bandwidth mode and logic-low selects high-gain mode, internally pulled down by a 75k resistor.
3 VCCR power_in Power supply for the receiver block.
4 ROUT+ output Noninverted CML receive data output, back-terminated for 50Ω.
5 ROUT- output Inverted CML receive data output, back-terminated for 50Ω.
6 VCCR power_in Power supply for the receiver block.
7 VCCD power_in Power supply for the digital block.
8 DISABLE input TTL/CMOS transmitter disable input; logic-low for normal operation, while logic-high or open disables modulation and bias current, internally pulled up by 8k to VCCT.
9 SCL input TTL/CMOS serial-clock input for the 3-wire interface, with a 75k internal pulldown.
10 SDA bidirectional TTL/CMOS serial-data line, open-drain output; requires an external 4.7k pullup to meet the 3-wire digital timing specification.
11 CSEL input TTL/CMOS chip-select input; logic-high starts a cycle and logic-low ends it and resets the control state machine, internally pulled down by a 75k resistor.
12 VCCT power_in Power supply for the transmitter block.
13 TIN+ input Noninverted CML transmit data input.
14 TIN- input Inverted CML transmit data input.
15 VCCT power_in Power supply for the transmitter block.
16 BMON output Bias current monitor output; current out of this pin develops a ground-referenced voltage across an external resistor proportional to the laser bias current.
17 VEET power_in Ground for the transmitter block.
18 VCCT power_in Power supply for the transmitter block.
19 TOUT- output Inverted modulation current output, back-terminated by 50Ω to VCCT.
20 TOUT+ output Noninverted modulation current output, back-terminated by 50Ω to VCCT.
21 VCCT power_in Power supply for the transmitter block.
22 BIAS output VCSEL bias current output.
23 FAULT output Transmitter fault open-drain output; logic-high indicates a fault, which remains high after the fault is removed until the fault latch is cleared by the DISABLE signal.
24 VCCT power_in Power supply for the transmitter block.
25 VCCT power_in Power supply for the transmitter block.
26 VEER power_in Ground for the receiver block.
27 VCCR power_in Power supply for the receiver block.
28 RIN- input Inverted CML receive data input.
29 RIN+ input Noninverted CML receive data input.
30 VCCR power_in Power supply for the receiver block.
31 CAZ2 passive Offset correction loop capacitor pin; a capacitor between CAZ2 and CAZ1 sets the loop time constant, and offset correction is disabled with AZ_EN = 0.
32 CAZ1 passive Offset correction loop capacitor pin, counterpart to CAZ2, internally connected to VEER.
33 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Maxim Integrated
Package TQFN-32(5x5)
Category Power Supply Chip
Pins 33

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating ambient temperature (part temperature range) TA -40 85 °C MAX3799ETJ+ PART TEMP RANGE; electrical table TA = -40°C to +85°C 2
Power-supply voltage VCC 2.85 3.63 V 2
Supply voltage VCCR, VCCT, VCCD VCCR, VCCT, VCCD -0.3 4 V 2
Voltage range at DISABLE, SDA, SCL, CSEL, RSEL, FAULT, BMON, LOS, CAZ2 (upper limit VCC + 0.3V) -0.3 V Maximum printed as VCC + 0.3V 2
Voltage at BIAS (upper limit VCC) 0 V Maximum printed as VCC 2
Current range into FAULT, LOS -1 5 mA 2
Current range into SDA -1 1 mA 2
Current into ROUT+, ROUT- 40 mA 2
Current into TOUT+, TOUT- 60 mA 2
Operating junction temperature range -55 150 °C 2
Storage temperature range -65 160 °C 2
Lead temperature (soldering) 300 °C soldering, 10s 2
Soldering temperature (reflow) 260 °C 2
High POR threshold 2.55 2.75 V 2
Low POR threshold 2.3 2.45 V IBIAS = IBIASOFF and IMOD = IMODOFF 2
Power-supply current ICC 97 150 mA Includes the CML output current; excludes IBIAS = 6mA, IMOD = 6mA, VDIFF_ROUT = 400mVP-P (Note 1) 2
Input data rate 1.0625 10.32 Gbps 2
Differential input resistance RIN+/RIN- RIN_DIFF 75 100 125 Ω RIN+/RIN- 2
Input sensitivity VINMIN 1 3 mVP-P RATE_SEL = 0 (1.25Gbps) 2
Input sensitivity VINMIN 3 8 mVP-P RATE_SEL = 1 (10.32Gbps) 2
Input overload VINMAX 1.2 VP-P 2
Input return loss SDD11 SDD11 14 dB DUT is powered on, f ≤ 5GHz 2
Input return loss SDD11 SDD11 7 dB DUT is powered on, f ≤ 16GHz 2
Input return loss SCC11 SCC11 8 dB DUT is powered on, 1GHz < f ≤ 5GHz 2
Differential output resistance ROUTDIFF 75 100 125 Ω 2
CML differential output voltage High 595 800 1005 mVP-P 5mVP-P ≤ VIN ≤ 1200mVP-P, SET_CML[162] 3
CML differential output voltage Medium 300 400 515 mVP-P 10mVP-P ≤ VIN ≤ 1200mVP-P, SET_CML[80] 3
Differential output signal when disabled 6 15 mVP-P Outputs AC-coupled, VINMAX applied to input, VDIFF_ROUT = 800mVP-P at 8.5Gbps (Notes 2, 3) 3
Data output transition time (20% to 80%) tR/tF 26 35 ps 10mVP-P ≤ VIN ≤ 1200mVP-P, RATE_SEL = 1, VDIFF_ROUT = 400mVP-P (Notes 2, 3, 4) 3
Data output transition time (20% to 80%) tR/tF 60 100 ps 5mVP-P ≤ VIN ≤ 1200mVP-P, RATE_SEL = 0, VDIFF_ROUT = 800mVP-P 3
Deterministic jitter DJ 4 12 psP-P 60mVP-P ≤ VIN ≤ 400mVP-P at 10.32Gbps, RATE_SEL = 1, VDIFF_ROUT = 400mVP-P (Notes 2, 3, 5) 3
Deterministic jitter DJ 20 psP-P 5mVP-P ≤ VIN ≤ 1200mVP-P at 1.25Gbps, RATE_SEL = 0, VDIFF_ROUT = 800mVP-P 3
Random jitter RJ 1.8 2.5 psRMS Input = 60mVP-P at 1.25Gbps, RATE_SEL = 0, VDIFF_ROUT = 800mVP-P 3
Random jitter RJ 0.32 0.48 psRMS Input = 60mVP-P at 8.5Gbps, RATE_SEL = 1, VDIFF_ROUT = 400mVP-P 3
LOS assert sensitivity range 14 77 mVP-P 3
LOS hysteresis 1.25 2.1 dB 10 x log(VDEASSERT/VASSERT) (Note 6) 3
LOS assert/deassert time 2.3 80 µs Note 7 3
Low assert level 8 11 14 mVP-P SET_LOS[7] (Notes 2, 6) 3
Low deassert level 14 18 21 mVP-P SET_LOS[7] (Notes 2, 6) 3
Medium assert level 39 48 58 mVP-P SET_LOS[32] (Notes 2, 6) 3
Medium deassert level 65 81 95 mVP-P SET_LOS[32] (Notes 2, 6) 3
High assert level 77 94 112 mVP-P SET_LOS[63] (Notes 2, 6) 3
High deassert level 127 158 182 mVP-P SET_LOS[63] (Notes 2, 6) 3
Tx differential input voltage VIN 0.2 2.4 VP-P Data rate = 1.0625Gbps 4
Tx differential input voltage VIN 0.075 0.8 VP-P Data rate = 10.32Gbps 4
Common-mode input voltage VINCM 2.75 V 4
Differential input resistance (Tx) RIN 75 100 125 Ω 4
Maximum modulation-on current into 100Ω differential load IMODMAX 12 mA Outputs AC-coupled, VCCTO 2.95V 4
Minimum modulation-on current into 100Ω differential load IMODMIN 2 mA Outputs AC-coupled 4
Maximum bias-on current IBIASMAX 15 mA Current into BIAS pin 4
Minimum bias-on current IBIASMIN 2 mA Current into BIAS pin 4
Compliance voltage at BIAS VBIAS 0.9 2.1 V 5
Compliance voltage at BMON VBMON 0 1.8 V 5
Excessive voltage at BIAS VBIAS 0.44 0.48 0.65 V Average voltage, FAULT always occurs for VBIAS 0.44V, FAULT never occurs for VBIAS 0.65V 5
Maximum VCSEL current in off state IOFF 25 µA FAULT or DISABLE, VBIAS = VCC 5
DISABLE assert time t_OFF 1 µs Time from rising edge of DISABLE input signal to IBIAS = IBIASOFF and IMOD = IMODOFF 5
DISABLE negate time t_ON 500 µs Time from falling edge of DISABLE to IBIAS and IMOD at 90% of steady state when FAULT = 0 before reset 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin PIN NAME FUNCTION 14 TIN- Inverted Transmit Data Input, CML 14

CAD (KiCad official)

  • Symbol: MAX3799ETJ+T
  • Footprint: Package_DFN_QFN:QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm
  • 3D model: TQFN-32(5x5) (KiCad packages3D, STEP)
  • 3D model files: max3799etj-t-etched.step / max3799etj-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max3799etj-t.step / max3799etj-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Maxim Integrated datasheet (36 pp, sha256 1b82f6725275e6be, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF