3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMAX3490EESA+
Analog Devices Inc Maxim Integrated · RS-485 / RS-422 ICs · SOIC-8
MAX3490EESA+ from Analog Devices Inc Maxim Integrated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Positive supply; operate at 3.0V ≤ VCC ≤ 3.6V and do not operate the device with VCC > 3.6V. |
| 2 | RO | output | Receiver output: goes high if A > B by 200mV and low if A < B by 200mV. |
| 3 | DI | input | Driver input: a low on DI forces Y low and Z high, and a high on DI forces Y high and Z low. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | Y | output | Noninverting driver output. |
| 6 | Z | output | Inverting driver output. |
| 7 | B | input | Inverting receiver input. |
| 8 | A | input | Noninverting receiver input. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | SOIC-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Differential Driver Output (RS-422) | VOD | 2 | V | RL = 100Ω (RS-422), Figure 4 | 3 | ||
| Differential Driver Output (RS-485) | VOD | 1.5 | V | RL = 54Ω (RS-485), Figure 4 | 3 | ||
| Differential Driver Output (RS-485, VCC = 3.3V) | VOD | 1.5 | V | RL = 60Ω (RS-485), VCC = 3.3V, Figure 5 | 3 | ||
| Change in Magnitude of Driver Differential Output Voltage | ΔVOD | 0.2 | V | RL = 54Ω or 100Ω, Figure 4 | 3 | ||
| Driver Common-Mode Output Voltage | VOC | 3 | V | RL = 54Ω or 100Ω, Figure 4 | 3 | ||
| Change in Magnitude of Common-Mode Output Voltage | ΔVOC | 0.2 | V | RL = 54Ω or 100Ω, Figure 4 | 3 | ||
| Input High Voltage | VIH | 2 | V | DE, DI, RE | 3 | ||
| Input Low Voltage | VIL | 0.8 | V | DE, DI, RE | 3 | ||
| Logic Input Current | IIN1 | -2 | 2 | µA | DE, DI, RE | 3 | |
| Input Current (A, B) | IIN2 | 1 | mA | DE = 0V, VCC = 0V or 3.6V, VIN = 12V | 3 | ||
| Input Current (A, B) | IIN2 | -0.8 | mA | DE = 0V, VCC = 0V or 3.6V, VIN = -7V | 3 | ||
| Receiver Differential Threshold Voltage | VTH | -0.2 | 0.2 | V | -7V ≤ VCM ≤ 12V | 3 | |
| Receiver Output Low Voltage | VOL | 0.4 | V | IOUT = 2.5mA, VID = 200mV, Figure 6 | 3 | ||
| Three-State (High Impedance) Output Current at Receiver | IOZR | -1 | 1 | µA | VCC = 3.6V, 0V ≤ VOUT ≤ VCC | 3 | |
| Receiver Input Resistance | RIN | 12 | kΩ | -7V ≤ VCM ≤ 12V | 3 | ||
| Supply Voltage Range | VCC | 3 | 3.6 | V | 3 | ||
| Supply Current | ICC | 1.1 | 2.2 | mA | No load, DI = 0 or VCC; DE = VCC, RE = 0 or VCC | 4 | |
| Supply Current | ICC | 0.95 | 1.9 | mA | No load, DI = 0 or VCC; DE = 0V, RE = 0 | 4 | |
| Driver Short-Circuit Output Current | IOSD | -250 | mA | VOUT = -7V | 4 | ||
| Driver Short-Circuit Output Current | IOSD | 250 | mA | VOUT = 12V | 4 | ||
| Receiver Short-Circuit Output Current | IOSR | 8 | 60 | mA | 0 ≤ VRO ≤ VCC | 4 | |
| ESD Protection, IEC 1000-4-2 Air Discharge (Y, Z, A, B) | -15 | 15 | kV | IEC 1000-4-2 Air Discharge | 4 | ||
| ESD Protection, IEC 1000-4-2 Contact Discharge (MAX3490E) | -6 | 6 | kV | IEC 1000-4-2 Contact Discharge (MAX3490E, MAX3488E), see footnote * | 4 | ||
| ESD Protection, Human Body Model (Y, Z, A, B) | -15 | 15 | kV | Human Body Model | 4 | ||
| Maximum Data Rate | 12 | 15 | Mbps | 4 | |||
| Driver Differential Output Delay | tDD | 1 | 22 | 35 | ns | RL = 60Ω, Figure 7 | 4 |
| Driver Differential Output Transition Time | tTD | 3 | 11 | 25 | ns | RL = 60Ω, Figure 7 | 4 |
| Driver Propagation Delay, Low-to-High Level | tPLH | 7 | 23 | 35 | ns | RL = 27Ω, Figure 8 | 4 |
| Driver Propagation Delay, High-to-Low Level | tPHL | 7 | 23 | 35 | ns | RL = 27Ω, Figure 8 | 4 |
| Driver Propagation Delay Skew | tPDS | -8 | -1.4 | 8 | ns | RL = 27Ω, Figure 8 | 4 |
| Receiver Propagation Delay, Low-to-High Level | tRPLH | 25 | 62 | 90 | ns | VID = 0 to 3.0, CL = 15pF, Figure 11 | 6 |
| Receiver Propagation Delay, High-to-Low Level | tRPHL | 25 | 62 | 90 | ns | VID = 0 to 3.0, CL = 15pF, Figure 11 | 6 |
| Receiver Propagation Delay Skew | tRPDS | -10 | 6 | 10 | ns | VID = 0 to 3.0, CL = 15pF, Figure 11 | 6 |
| Supply Voltage (VCC) | VCC | 7 | V | 2 | |||
| Control Input Voltage (RE, DE) | -0.3 | 7 | V | 2 | |||
| Driver Input Voltage (DI) | -0.3 | 7 | V | 2 | |||
| Driver Output Voltage (A, B, Y, Z) | -7.5 | 12.5 | V | 2 | |||
| Receiver Input Voltage (A, B) | -7.5 | 12.5 | V | 2 | |||
| Junction Temperature | TJ | 150 | °C | 2 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Lead Temperature (soldering) | 300 | °C | soldering, 10 sec | 2 | |||
| Supply Voltage Range | VCC | 3 | 3.6 | V | 3 | ||
| Operating Temperature Range (EE suffix) | TA | -40 | 85 | °C | MAX34__EE__ | 2 |
CAD (KiCad official)
- Symbol:
MAX3490EESA+ - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
max3490eesa-etched.step/max3490eesa-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max3490eesa.step/max3490eesa.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc Maxim Integrated datasheet (19 pp, sha256
0c31881e8320394a, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).