main
Ray
Publish 0.1.0
5c93fa9
MAX3485EPA+
Analog Devices Inc./Maxim Integrated · RS-485 / RS-422 ICs · PDIP-8
MAX3485EPA+ from Analog Devices Inc./Maxim Integrated, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output: high if A > B by 200mV, low if A < B by 200mV; high impedance when RE is high. |
| 2 | RE | input | Receiver output enable: RO is enabled when RE is low and high impedance when RE is high; RE high with DE low enters low-power shutdown. |
| 3 | DE | input | Driver output enable: driver outputs enabled when DE is high and high impedance when DE is low; RE high with DE low enters low-power shutdown. |
| 4 | DI | input | Driver input: a low forces output A low and B high, a high forces A high and B low (Y/Z per datasheet text). |
| 5 | GND | power_in | Ground. |
| 6 | A | bidirectional | Noninverting receiver input and noninverting driver output; input range -7V to +12V common mode. |
| 7 | B | bidirectional | Inverting receiver input and inverting driver output; input range -7V to +12V common mode. |
| 8 | VCC | power_in | Positive supply: 3.0V ≤ VCC ≤ 3.6V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc./Maxim Integrated |
| Package | PDIP-8 |
| Category | Interface |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Differential Driver Output | VOD | 2 | V | RL = 100Ω (RS-422), Figure 4 | 3 | ||
| Differential Driver Output | VOD | 1.5 | V | RL = 54Ω (RS-485), Figure 4 | 3 | ||
| Change in Magnitude of Driver Differential Output Voltage | ΔVOD | 0.2 | V | RL = 54Ω or 100Ω, Figure 4 | 3 | ||
| Driver Common-Mode Output Voltage | VOC | 3 | V | RL = 54Ω or 100Ω, Figure 4 | 3 | ||
| Change in Magnitude of Common-Mode Output Voltage | ΔVOC | 0.2 | V | RL = 54Ω or 100Ω, Figure 4 | 3 | ||
| Input High Voltage | VIH | 2 | V | DE, DI, RE | 3 | ||
| Input Low Voltage | VIL | 0.8 | V | DE, DI, RE | 3 | ||
| Logic Input Current | IIN1 | -2 | 2 | μA | DE, DI, RE | 3 | |
| Input Current (A, B) | IIN2 | 1 | mA | DE = 0V, VCC = 0V or 3.6V, VIN = 12V | 3 | ||
| Input Current (A, B) | IIN2 | -0.8 | mA | DE = 0V, VCC = 0V or 3.6V, VIN = -7V | 3 | ||
| Receiver Differential Threshold Voltage | VTH | -0.2 | 0.2 | V | -7V ≤ VCM ≤ 12V | 3 | |
| Receiver Output Low Voltage | VOL | 0.4 | V | IOUT = 2.5mA, VID = 200mV, Figure 6 | 3 | ||
| Three-State Output Current at Receiver | IOZR | -1 | 1 | μA | VCC = 3.6V, 0V ≤ VOUT ≤ VCC | 3 | |
| Receiver Input Resistance | RIN | 12 | kΩ | -7V ≤ VCM ≤ 12V | 3 | ||
| Supply Current | ICC | 1.1 | 2.2 | mA | No load, DI = 0V or VCC, DE = VCC, RE = 0V or VCC | 3 | |
| Supply Current | ICC | 0.95 | 1.9 | mA | No load, DI = 0V or VCC, DE = 0V, RE = 0V | 3 | |
| Supply Current in Shutdown Mode | ISHDN | 0.002 | 1 | µA | DE = 0V, RE = VCC, DI = VCC or 0V | 3 | |
| Driver Short-Circuit Output Current | IOSD | -250 | mA | VOUT = -7V | 3 | ||
| Driver Short-Circuit Output Current | IOSD | 250 | mA | VOUT = 12V | 3 | ||
| Receiver Short-Circuit Output Current | IOSR | 8 | 60 | mA | 0V ≤ VRO ≤ VCC | 3 | |
| Receiver Input Hysteresis | ΔVTH | 50 | mV | VCM = 0V | 3 | ||
| Driver Differential Output Delay | tDD | 1 | 22 | 35 | ns | RL = 60Ω, Figure 7 | 4 |
| Driver Differential Output Transition Time | tTD | 3 | 8 | 25 | ns | RL = 60Ω, Figure 7 | 4 |
| Driver Propagation Delay, Low-to-High Level | tPLH | 7 | 22 | 35 | ns | RL = 27Ω, Figure 8 | 4 |
| Driver Propagation Delay, High-to-Low Level | tPHL | 7 | 22 | 35 | ns | RL = 27Ω, Figure 8 | 4 |
| Driver Propagation Delay Skew | tPDS | 8 | ns | RL = 27Ω, Figure 8 | 4 | ||
| Driver Output Enable Time to Low Level | tPZL | 45 | 90 | ns | RL = 110Ω, Figure 10 | 4 | |
| Driver Output Enable Time to High Level | tPZH | 45 | 90 | ns | RL = 110Ω, Figure 9 | 4 | |
| Driver Output Disable Time from High Level | tPHZ | 40 | 80 | ns | RL = 110Ω, Figure 9 | 4 | |
| Driver Output Disable Time from Low Level | tPLZ | 40 | 80 | ns | RL = 110Ω, Figure 10 | 4 | |
| Driver Output Enable Time from Shutdown to Low Level | tPSL | 650 | 900 | ns | RL = 110Ω, Figure 10 | 4 | |
| Driver Output Enable Time from Shutdown to High Level | tPSH | 650 | 900 | ns | RL = 110Ω, Figure 9 | 4 | |
| Time to Shutdown | tSHDN | 80 | 190 | 300 | ns | MAX3483/MAX3485/MAX3486/MAX3491 only (Note 3) | 5 |
| Receiver Propagation Delay, Low-to-High Level | tRPLH | 25 | 65 | 90 | ns | VID = 0V to 3.0V, CL = 15pF, Figure 11 | 5 |
| Receiver Propagation Delay, High-to-Low Level | tRPHL | 25 | 65 | 90 | ns | VID = 0V to 3.0V, CL = 15pF, Figure 11 | 5 |
| Receiver Propagation Delay Skew | tRPDS | 10 | ns | VID = 0V to 3.0V, CL = 15pF, Figure 11 | 5 | ||
| Receiver Output Enable Time to Low Level | tPRZL | 25 | 50 | ns | CL = 15pF, Figure 12 | 5 | |
| Receiver Output Enable Time to High Level | tPRZH | 25 | 50 | ns | CL = 15pF, Figure 12 | 5 | |
| Receiver Output Disable Time from High Level | tPRHZ | 25 | 45 | ns | CL = 15pF, Figure 12 | 5 | |
| Receiver Output Disable Time from Low Level | tPRLZ | 25 | 45 | ns | CL = 15pF, Figure 12 | 5 | |
| Receiver Output Enable Time from Shutdown to Low Level | tPRSL | 720 | 1400 | ns | CL = 15pF, Figure 12 | 5 | |
| Receiver Output Enable Time from Shutdown to High Level | tPRSH | 720 | 1400 | ns | CL = 15pF, Figure 12 | 5 | |
| Supply Voltage | VCC | 7 | V | 2 | |||
| Control Input Voltage | RE, DE | -0.3 | 7 | V | 2 | ||
| Driver Input Voltage | DI | -0.3 | 7 | V | 2 | ||
| Driver Output Voltage | A, B, Y, Z | -7.5 | 12.5 | V | 2 | ||
| Receiver Input Voltage | A, B | -7.5 | 12.5 | V | 2 | ||
| Operating Temperature Range | -40 | 85 | °C | MAX34__E__ | 2 | ||
| Junction Temperature | 160 | °C | 2 | ||||
| Storage Temperature Range | -65 | 160 | °C | 2 | |||
| Lead Temperature | 300 | °C | soldering, 10sec | 2 | |||
| Supply Voltage | VCC | 3 | 3.6 | V | Positive Supply: 3.0V ≤ VCC ≤ 3.6V | 7 |
CAD (KiCad official)
- Symbol:
MAX3485EPA+ - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files:
max3485epa-etched.step/max3485epa-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max3485epa.step/max3485epa.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc./Maxim Integrated datasheet (17 pp, sha256
e648fd27831d1ba1, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MAX3485EPA+
**Analog Devices Inc./Maxim Integrated** · RS-485 / RS-422 ICs · PDIP-8
MAX3485EPA+ from Analog Devices Inc./Maxim Integrated, in a PDIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver output: high if A > B by 200mV, low if A < B by 200mV; high impedance when RE is high. |
| 2 | RE | input | Receiver output enable: RO is enabled when RE is low and high impedance when RE is high; RE high with DE low enters low-power shutdown. |
| 3 | DE | input | Driver output enable: driver outputs enabled when DE is high and high impedance when DE is low; RE high with DE low enters low-power shutdown. |
| 4 | DI | input | Driver input: a low forces output A low and B high, a high forces A high and B low (Y/Z per datasheet text). |
| 5 | GND | power_in | Ground. |
| 6 | A | bidirectional | Noninverting receiver input and noninverting driver output; input range -7V to +12V common mode. |
| 7 | B | bidirectional | Inverting receiver input and inverting driver output; input range -7V to +12V common mode. |
| 8 | VCC | power_in | Positive supply: 3.0V ≤ VCC ≤ 3.6V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc./Maxim Integrated |
| Package | PDIP-8 |
| Category | Interface |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Differential Driver Output | VOD | 2 | | | V | RL = 100Ω (RS-422), Figure 4 | 3 |
| Differential Driver Output | VOD | 1.5 | | | V | RL = 54Ω (RS-485), Figure 4 | 3 |
| Change in Magnitude of Driver Differential Output Voltage | ΔVOD | | | 0.2 | V | RL = 54Ω or 100Ω, Figure 4 | 3 |
| Driver Common-Mode Output Voltage | VOC | | | 3 | V | RL = 54Ω or 100Ω, Figure 4 | 3 |
| Change in Magnitude of Common-Mode Output Voltage | ΔVOC | | | 0.2 | V | RL = 54Ω or 100Ω, Figure 4 | 3 |
| Input High Voltage | VIH | 2 | | | V | DE, DI, RE | 3 |
| Input Low Voltage | VIL | | | 0.8 | V | DE, DI, RE | 3 |
| Logic Input Current | IIN1 | -2 | | 2 | μA | DE, DI, RE | 3 |
| Input Current (A, B) | IIN2 | | | 1 | mA | DE = 0V, VCC = 0V or 3.6V, VIN = 12V | 3 |
| Input Current (A, B) | IIN2 | -0.8 | | | mA | DE = 0V, VCC = 0V or 3.6V, VIN = -7V | 3 |
| Receiver Differential Threshold Voltage | VTH | -0.2 | | 0.2 | V | -7V ≤ VCM ≤ 12V | 3 |
| Receiver Output Low Voltage | VOL | | | 0.4 | V | IOUT = 2.5mA, VID = 200mV, Figure 6 | 3 |
| Three-State Output Current at Receiver | IOZR | -1 | | 1 | μA | VCC = 3.6V, 0V ≤ VOUT ≤ VCC | 3 |
| Receiver Input Resistance | RIN | 12 | | | kΩ | -7V ≤ VCM ≤ 12V | 3 |
| Supply Current | ICC | | 1.1 | 2.2 | mA | No load, DI = 0V or VCC, DE = VCC, RE = 0V or VCC | 3 |
| Supply Current | ICC | | 0.95 | 1.9 | mA | No load, DI = 0V or VCC, DE = 0V, RE = 0V | 3 |
| Supply Current in Shutdown Mode | ISHDN | | 0.002 | 1 | µA | DE = 0V, RE = VCC, DI = VCC or 0V | 3 |
| Driver Short-Circuit Output Current | IOSD | -250 | | | mA | VOUT = -7V | 3 |
| Driver Short-Circuit Output Current | IOSD | | | 250 | mA | VOUT = 12V | 3 |
| Receiver Short-Circuit Output Current | IOSR | 8 | | 60 | mA | 0V ≤ VRO ≤ VCC | 3 |
| Receiver Input Hysteresis | ΔVTH | | 50 | | mV | VCM = 0V | 3 |
| Driver Differential Output Delay | tDD | 1 | 22 | 35 | ns | RL = 60Ω, Figure 7 | 4 |
| Driver Differential Output Transition Time | tTD | 3 | 8 | 25 | ns | RL = 60Ω, Figure 7 | 4 |
| Driver Propagation Delay, Low-to-High Level | tPLH | 7 | 22 | 35 | ns | RL = 27Ω, Figure 8 | 4 |
| Driver Propagation Delay, High-to-Low Level | tPHL | 7 | 22 | 35 | ns | RL = 27Ω, Figure 8 | 4 |
| Driver Propagation Delay Skew | tPDS | | | 8 | ns | RL = 27Ω, Figure 8 | 4 |
| Driver Output Enable Time to Low Level | tPZL | | 45 | 90 | ns | RL = 110Ω, Figure 10 | 4 |
| Driver Output Enable Time to High Level | tPZH | | 45 | 90 | ns | RL = 110Ω, Figure 9 | 4 |
| Driver Output Disable Time from High Level | tPHZ | | 40 | 80 | ns | RL = 110Ω, Figure 9 | 4 |
| Driver Output Disable Time from Low Level | tPLZ | | 40 | 80 | ns | RL = 110Ω, Figure 10 | 4 |
| Driver Output Enable Time from Shutdown to Low Level | tPSL | | 650 | 900 | ns | RL = 110Ω, Figure 10 | 4 |
| Driver Output Enable Time from Shutdown to High Level | tPSH | | 650 | 900 | ns | RL = 110Ω, Figure 9 | 4 |
| Time to Shutdown | tSHDN | 80 | 190 | 300 | ns | MAX3483/MAX3485/MAX3486/MAX3491 only (Note 3) | 5 |
| Receiver Propagation Delay, Low-to-High Level | tRPLH | 25 | 65 | 90 | ns | VID = 0V to 3.0V, CL = 15pF, Figure 11 | 5 |
| Receiver Propagation Delay, High-to-Low Level | tRPHL | 25 | 65 | 90 | ns | VID = 0V to 3.0V, CL = 15pF, Figure 11 | 5 |
| Receiver Propagation Delay Skew | tRPDS | | | 10 | ns | VID = 0V to 3.0V, CL = 15pF, Figure 11 | 5 |
| Receiver Output Enable Time to Low Level | tPRZL | | 25 | 50 | ns | CL = 15pF, Figure 12 | 5 |
| Receiver Output Enable Time to High Level | tPRZH | | 25 | 50 | ns | CL = 15pF, Figure 12 | 5 |
| Receiver Output Disable Time from High Level | tPRHZ | | 25 | 45 | ns | CL = 15pF, Figure 12 | 5 |
| Receiver Output Disable Time from Low Level | tPRLZ | | 25 | 45 | ns | CL = 15pF, Figure 12 | 5 |
| Receiver Output Enable Time from Shutdown to Low Level | tPRSL | | 720 | 1400 | ns | CL = 15pF, Figure 12 | 5 |
| Receiver Output Enable Time from Shutdown to High Level | tPRSH | | 720 | 1400 | ns | CL = 15pF, Figure 12 | 5 |
| Supply Voltage | VCC | | | 7 | V | | 2 |
| Control Input Voltage | RE, DE | -0.3 | | 7 | V | | 2 |
| Driver Input Voltage | DI | -0.3 | | 7 | V | | 2 |
| Driver Output Voltage | A, B, Y, Z | -7.5 | | 12.5 | V | | 2 |
| Receiver Input Voltage | A, B | -7.5 | | 12.5 | V | | 2 |
| Operating Temperature Range | | -40 | | 85 | °C | MAX34__E__ | 2 |
| Junction Temperature | | | | 160 | °C | | 2 |
| Storage Temperature Range | | -65 | | 160 | °C | | 2 |
| Lead Temperature | | | | 300 | °C | soldering, 10sec | 2 |
| Supply Voltage | VCC | 3 | | 3.6 | V | Positive Supply: 3.0V ≤ VCC ≤ 3.6V | 7 |
## CAD (KiCad official)
- Symbol: `MAX3485EPA+`
- Footprint: `Package_DIP:DIP-8_W7.62mm`
- 3D model: PDIP-8 (KiCad packages3D, STEP)
- 3D model files: `max3485epa-etched.step` / `max3485epa-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max3485epa.step` / `max3485epa.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices Inc./Maxim Integrated datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/max3483-max3491.pdf) (17 pp, sha256 `e648fd27831d1ba1`, retrieved 2026-11-02, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-opus-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/max3485epa-datasheet.pdf)