component

MAX3485 RS-485 Transceiver

Public Made by Adom

by adom

3.3 V half-duplex RS-485/RS-422 transceiver, up to 10 Mbps, with driver and receiver enables.

rs-485rs-422transceiverinterface3.3vadisoic-8
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

PCB Footprint

Open full view ↗
Loads on click. Unloads only if this page sits in the background.

Datasheet

Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Download PDF
Contents

README

markdown

MAX3485

Analog Devices · RS-485 Transceiver · SOIC-8

The MAX3485 is a 3.3 V half-duplex RS-485/RS-422 transceiver with a driver and receiver in one package, each with an enable. It converts logic-level UART signals to the differential A/B bus and back for reliable multidrop communication over long cables (Modbus, industrial networks), at data rates up to 10 Mbps.

Pinout

Pin Name Type Function
1 RO output Receiver Output. If A > B by 200mV, RO will be high; if A < B by 200mV, RO will be low. Drives to VOH = VCC - 0.4V (min) at IOUT = -1.5mA.
2 RE input Receiver Output Enable (active-low). RO is enabled when RE is low; RO is high-impedance when RE is high. VIH = 2.0V min, VIL = 0.8V max.
3 DE input Driver Output Enable. Driver outputs A and B are enabled when DE is high and high-impedance when DE is low. VIH = 2.0V min, VIL = 0.8V max.
4 DI input Driver Input. A low on DI forces output A low and output B high; a high on DI forces output A high and output B low. VIH = 2.0V min, VIL = 0.8V max.
5 GND power_in Ground reference.
6 A bidirectional Noninverting Receiver Input and Noninverting Driver Output (half-duplex). Differential bus pin; -7V to +12V common-mode range; VOD (differential driver output) = 1.5V min with RL = 54Ω.
7 B bidirectional Inverting Receiver Input and Inverting Driver Output (half-duplex). Differential bus pin; -7V to +12V common-mode range; complementary to A.
8 VCC power_in Positive Supply: 3.0V ≤ VCC ≤ 3.6V. ICC ≈ 1.1mA typ (2.2mA max) with no load.

Key specifications

Parameter Value
Type Half-duplex RS-485/RS-422 transceiver
Supply voltage 3.0 V to 3.6 V
Data rate Up to 10 Mbps
Bus Differential A / B, up to 32 nodes
Enables Separate driver (DE) and receiver (RE)
Operating temperature -40 C to 85 C

Ordering variants

Same part, different packaging or reel option.

  • MAX3485CSA
  • MAX3485ESA
  • MAX3485CPA
  • MAX3485EPA
  • MAX3485C/D

CAD (KiCad official)

  • Symbol: max3485.kicad_sym
  • Footprint: max3485.kicad_mod
  • 3D model: SOIC-8 body from KiCad Package_SO/SOIC-8_3.9x4.9mm_P1.27mm.
  • 3D model files: max3485-etched.step / max3485-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max3485.step / max3485.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (17 pp, sha256 e648fd27831d1ba1, retrieved 2026-08-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF