main
Ray
Publish 0.1.0
2bbcb21
MAX3386EIPWR
Texas Instruments · RS232 ICs · TSSOP-20
MAX3386EIPWR from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive terminal of the voltage-doubler charge-pump capacitor (C1 = 0.047 µF in the electrical characteristics test conditions, 0.1 µF at 3.3 V operation). |
| 2 | V+ | power_out | 5.5-V supply generated by the charge pump; V+ and V- magnitudes are limited to 7 V each, with |
| 3 | C1− | passive | Negative terminal of the voltage-doubler charge-pump capacitor. |
| 4 | C2+ | passive | Positive terminal of the inverting charge-pump capacitor. |
| 5 | C2− | passive | Negative terminal of the inverting charge-pump capacitor. |
| 6 | V− | power_out | −5.5-V supply generated by the charge pump; V+ and V- magnitudes are limited to 7 V each, with |
| 7 | DIN1 | input | Driver input 1, a TTL/CMOS input referenced to VL; logic thresholds depend on VL (for example 0.8 V max low and 2.0 V min high at VL = 3 V). |
| 8 | DIN2 | input | Driver input 2, a TTL/CMOS input referenced to VL; logic thresholds depend on VL (for example 0.8 V max low and 2.0 V min high at VL = 3 V). |
| 9 | DIN3 | input | Driver input 3, a TTL/CMOS input referenced to VL; logic thresholds depend on VL (for example 0.8 V max low and 2.0 V min high at VL = 3 V). |
| 10 | ROUT2 | output | Receiver output 2, swinging between 0 and VL. |
| 11 | ROUT1 | output | Receiver output 1, swinging between 0 and VL. |
| 12 | VL | power_in | Logic-level supply (2.25 V minimum up to VCC); all CMOS inputs and outputs are referenced to this supply. |
| 13 | RIN2 | input | RS-232 receiver input 2, rated ±25 V receiver input voltage. |
| 14 | RIN1 | input | RS-232 receiver input 1, rated ±25 V receiver input voltage. |
| 15 | DOUT3 | output | RS-232 driver output 3, with output swing of ±5 V minimum and DOUT to GND rated ±13.2 V absolute maximum. |
| 16 | DOUT2 | output | RS-232 driver output 2, with output swing of ±5 V minimum and DOUT to GND rated ±13.2 V absolute maximum. |
| 17 | DOUT1 | output | RS-232 driver output 1, with output swing of ±5 V minimum and DOUT to GND rated ±13.2 V absolute maximum. |
| 18 | GND | power_in | Ground reference for the device (VCC to GND rated −0.3 V to 6 V). |
| 19 | VCC | power_in | 3-V to 5.5-V supply voltage. |
| 20 | PWRDWN | input | Powerdown input: L = powerdown, H = normal operation; input rated −0.3 V to 6 V to GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-20 |
| Category | Interface |
| Pins | 20 |
CAD (KiCad official)
- Symbol:
MAX3386EIPWR - Footprint:
Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm - 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files:
max3386eipwr-etched.step/max3386eipwr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max3386eipwr.step/max3386eipwr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (21 pp, sha256
d9a7ef4662b4ea18, retrieved 2026-10-11, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MAX3386EIPWR
**Texas Instruments** · RS232 ICs · TSSOP-20
MAX3386EIPWR from Texas Instruments, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive terminal of the voltage-doubler charge-pump capacitor (C1 = 0.047 µF in the electrical characteristics test conditions, 0.1 µF at 3.3 V operation). |
| 2 | V+ | power_out | 5.5-V supply generated by the charge pump; V+ and V- magnitudes are limited to 7 V each, with |V+| + |V-| not exceeding 13 V. |
| 3 | C1− | passive | Negative terminal of the voltage-doubler charge-pump capacitor. |
| 4 | C2+ | passive | Positive terminal of the inverting charge-pump capacitor. |
| 5 | C2− | passive | Negative terminal of the inverting charge-pump capacitor. |
| 6 | V− | power_out | −5.5-V supply generated by the charge pump; V+ and V- magnitudes are limited to 7 V each, with |V+| + |V-| not exceeding 13 V. |
| 7 | DIN1 | input | Driver input 1, a TTL/CMOS input referenced to VL; logic thresholds depend on VL (for example 0.8 V max low and 2.0 V min high at VL = 3 V). |
| 8 | DIN2 | input | Driver input 2, a TTL/CMOS input referenced to VL; logic thresholds depend on VL (for example 0.8 V max low and 2.0 V min high at VL = 3 V). |
| 9 | DIN3 | input | Driver input 3, a TTL/CMOS input referenced to VL; logic thresholds depend on VL (for example 0.8 V max low and 2.0 V min high at VL = 3 V). |
| 10 | ROUT2 | output | Receiver output 2, swinging between 0 and VL. |
| 11 | ROUT1 | output | Receiver output 1, swinging between 0 and VL. |
| 12 | VL | power_in | Logic-level supply (2.25 V minimum up to VCC); all CMOS inputs and outputs are referenced to this supply. |
| 13 | RIN2 | input | RS-232 receiver input 2, rated ±25 V receiver input voltage. |
| 14 | RIN1 | input | RS-232 receiver input 1, rated ±25 V receiver input voltage. |
| 15 | DOUT3 | output | RS-232 driver output 3, with output swing of ±5 V minimum and DOUT to GND rated ±13.2 V absolute maximum. |
| 16 | DOUT2 | output | RS-232 driver output 2, with output swing of ±5 V minimum and DOUT to GND rated ±13.2 V absolute maximum. |
| 17 | DOUT1 | output | RS-232 driver output 1, with output swing of ±5 V minimum and DOUT to GND rated ±13.2 V absolute maximum. |
| 18 | GND | power_in | Ground reference for the device (VCC to GND rated −0.3 V to 6 V). |
| 19 | VCC | power_in | 3-V to 5.5-V supply voltage. |
| 20 | PWRDWN | input | Powerdown input: L = powerdown, H = normal operation; input rated −0.3 V to 6 V to GND. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TSSOP-20 |
| Category | Interface |
| Pins | 20 |
## CAD (KiCad official)
- Symbol: `MAX3386EIPWR`
- Footprint: `Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm`
- 3D model: TSSOP-20 (KiCad packages3D, STEP)
- 3D model files: `max3386eipwr-etched.step` / `max3386eipwr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max3386eipwr.step` / `max3386eipwr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/max3386e) (21 pp, sha256 `d9a7ef4662b4ea18`, retrieved 2026-10-11, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/max3386eipwr-datasheet.pdf)