main
Ray
Publish 0.1.0
a5b9142
MAX33046EASA+
Analog Devices Inc./Maxim Integrated · RS-485/RS-422 ICs · SOIC-8
MAX33046EASA+ from Analog Devices Inc./Maxim Integrated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver data output, high impedance when RE is high; logic high when (VA-VB) ≥ -50mV or inputs open/shorted, low when ≤ -200mV. |
| 2 | RE | input | Receiver output enable (active low): drive low or connect to GND to enable RO, drive high to disable it; RE high with DE low forces low-power shutdown. |
| 3 | DE | input | Driver output enable: drive high to enable the driver, drive low or connect to GND to disable it (A and B high impedance). |
| 4 | DI | input | Driver input: with DE high, a low on DI forces the non-inverting output A low and inverting output B high, and a high forces A high and B low. |
| 5 | GND | power_in | Ground. |
| 6 | A | bidirectional | Non-inverting RS-485/RS-422 receiver input and driver output, with ±25V fault protection and ±40kV HBM ESD. |
| 7 | B | bidirectional | Inverting RS-485/RS-422 receiver input and driver output, with ±25V fault protection and ±40kV HBM ESD. |
| 8 | VCC | power_in | Positive supply input for 3.0V to 3.6V or 4.5V to 5.5V operation; bypass with a 0.1µF ceramic capacitor to ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc./Maxim Integrated |
| Package | SOIC-8 |
| Category | Communication Interface Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (3.3V range) | VCC | 3 | 3.6 | V | 2 | ||
| Supply Voltage (5V range) | VCC | 4.5 | 5.5 | V | 2 | ||
| Supply Current, driver enabled | ICC | 6 | mA | DE = VCC, RE = 0V, no load, no switching (DI = 0V or VCC) | 2 | ||
| Supply Current, receiver only | ICC | 3.2 | mA | DE = 0V, RE = 0V | 2 | ||
| Shutdown Supply Current | ISHDN | 1 | µA | DE = 0V, RE = VCC, no switching (DI = 0V or VCC) | 2 | ||
| Differential Driver Output | /VOD/ | 1.5 | V | RL = 54Ω, Figure 1a (Note 2) | 2 | ||
| Differential Driver Output | /VOD/ | 2 | V | RL = 100Ω, Figure 1a (Note 2) | 2 | ||
| Change in Magnitude of Differential Driver Output Voltage | ∆VOD | -0.2 | 0.2 | V | RL = 54Ω or 60Ω or 100Ω, Figure 1a | 2 | |
| Driver Common-Mode Output Voltage | VOC | 1 | V | RL = 54Ω or 60Ω or 100Ω, Figure 1a | 2 | ||
| Change in Magnitude of Common-Mode Voltage | ∆VOC | -0.2 | 0.2 | V | RL = 54Ω or 60Ω or 100Ω, Figure 1a (Note 2) | 2 | |
| Single-Ended Driver Output Voltage High | VOH | 2.4 | V | A or B output, output is high, ISOURCE = 3mA | 3 | ||
| Single-Ended Driver Output Voltage Low | VOL | 0.2 | V | A or B output, output is low, ISINK = 3mA | 3 | ||
| Driver Short-Circuit Output Current | ISC_DR | -250 | 250 | mA | -7V ≤ (VA or VB) ≤ +12V | 3 | |
| Average Driver Short-Circuit Output Current | IAVG_SCDR | 250 | mA | 0V ≤ (VA or VB) ≤ VCC | 3 | ||
| Input Current (A, B) | IA, IB | -73 | 125 | µA | DE = 0V, 0V ≤ VCC ≤ 5.5V, VCM = -7V to +12V | 3 | |
| Receiver Input Resistance | RIN | 96 | kΩ | -7V ≤ VCM ≤ +12V | 3 | ||
| Common-Mode Voltage Range | VCM | -7 | 12 | V | Figure 1b | 3 | |
| Receiver Differential Threshold Voltage Rising | VTLH | -50 | mV | -7V ≤ VCM ≤ +12V | 3 | ||
| Receiver Differential Threshold Voltage Falling | VTHL | -200 | mV | -7V ≤ VCM ≤ +12V | 3 | ||
| Receiver Input Hysteresis | ∆VTH | 100 | mV | 3 | |||
| Differential Input Capacitance | CA_B | 10 | pF | Measured between A and B, f = 1MHz | 3 | ||
| Output Logic Low Voltage (RO) | VOL | 0.4 | V | ISINK = 3mA, (VA - VB) ≤ -200mV | 3 | ||
| Leakage Current (RO) | IOZR | -1 | 1 | µA | 0V ≤ VRO ≤ VCC | 3 | |
| Short-Circuit Current (RO) | /IOSR/ | 200 | mA | 0V ≤ (VA, VB) ≤ VCC | 3 | ||
| Input Logic High Voltage | VIH | 2 | V | 3 | |||
| Input Logic Low Voltage | VIL | 0.8 | V | 3 | |||
| Input Hysteresis | VHYS | 100 | mV | 3 | |||
| Input Leakage Current | IIN | -1 | 1 | µA | After first transition of DE | 3 | |
| DE Input Impedance on First Transition | RIN_FT | 1 | 10 | kΩ | 3 | ||
| Fault Protection (A, B Pins to GND) | -25 | 25 | V | 4 | |||
| Thermal Shutdown Threshold | TSHDN | 160 | °C | Temperature rising | 4 | ||
| Thermal Shutdown Hysteresis | THYST | 12 | °C | 4 | |||
| Differential Driver Propagation Delay | tDPLH, tDPHL | 40 | ns | RL = 54Ω, CL = 50pF (Figures 2 and 3) | 4 | ||
| Differential Driver Output Skew | tDSKEW | 9 | ns | RL = 54Ω, CL = 50pF (Note 4, Figures 2 and 3) | 5 | ||
| Driver Differential Output Rise or Fall Time | tLH, tHL | 8 | 15 | ns | RL = 54Ω, CL = 50pF (Figures 2 and 3) | 5 | |
| Maximum Data Rate | DRMAX | 20 | Mbps | 5 | |||
| Driver Enable to Output High | tDZH | 90 | ns | RL = 110Ω, CL = 50pF (Figures 4 and 5) | 5 | ||
| Driver Enable to Output Low | tDZL | 90 | ns | RL = 110Ω, CL = 50pF (Figures 4 and 5) | 5 | ||
| Driver Disable Time from Low | tDLZ | 60 | ns | RL = 110Ω, CL = 50pF (Figures 4 and 5) | 5 | ||
| Driver Disable Time from High | tDHZ | 60 | ns | RL = 110Ω, CL = 50pF (Figures 4 and 5) | 5 | ||
| Driver Enable Time from Shutdown to Output High | tDZH(SHDN) | 170 | µs | RL = 110Ω, CL = 50pF (Note 3, Figures 4 and 6) | 5 | ||
| Driver Enable Time from Shutdown to Output Low | tDZL(SHDN) | 170 | µs | RL = 110Ω, CL = 50pF (Note 3, Figures 4 and 6) | 5 | ||
| Time to Shutdown (driver) | tSHDN | 50 | 800 | 1500 | ns | (Note 3) | 5 |
| Receiver Propagation Delay | tRPLH, tRPHL | 75 | ns | CL = 15pF (Figures 6 and 7) | 6 | ||
| Receiver Output Skew | tRSKEW | 10 | ns | CL = 15pF (Note 4, Figures 6 and 7) | 6 | ||
| Receiver Enable to Output High | tRZH | 50 | ns | RL = 1kΩ, CL = 15pF (Figure 8) | 6 | ||
| Receiver Enable to Output Low | tRZL | 50 | ns | RL = 1kΩ, CL = 15pF (Figure 8) | 6 | ||
| Receiver Disable Time from Low | tRLZ | 50 | ns | RL = 1kΩ, CL = 15pF (Figure 8) | 6 | ||
| Receiver Disable Time from High | tRHZ | 50 | ns | RL = 1kΩ, CL = 15pF (Figure 8) | 6 | ||
| Receiver Enable from Shutdown to Output Low | tRZL(SHDN) | 170 | µs | RL = 1kΩ, CL = 15pF (Note 3, Figure 8) | 6 | ||
| Receiver Enable from Shutdown to Output High | tRZH(SHDN) | 170 | µs | RL = 1kΩ, CL = 15pF (Note 3, Figure 8) | 6 | ||
| Time to Shutdown (receiver) | tSHDN | 50 | 800 | 1500 | ns | (Note 3) | 6 |
| Delay to Fail-Safe Operation | tD_FS | 10 | µs | 6 | |||
| Supply Voltage | VCC | -0.3 | 6 | V | 2 | ||
| RO Voltage | RO | -0.3 | V | Max is VCC + 0.3V | 2 | ||
| DE, DI Voltage | DE, DI | -0.3 | 6 | V | 2 | ||
| A, B Voltage | A, B | -30 | 30 | V | 2 | ||
| Operating Temperature Range | -40 | 125 | °C | 2 | |||
| Junction Temperature | 150 | °C | 2 | ||||
| Storage Temperature | -65 | 150 | °C | 2 | |||
| Thermal Resistance Junction to Ambient | θJA | 136 | °C/W | Four-layer board, SOIC 8 | 2 | ||
| Thermal Resistance Junction to Case | θJC | 38 | °C/W | Four-layer board, SOIC 8 | 2 |
CAD (KiCad official)
- Symbol:
MAX33046EASA+ - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
max33046easa-etched.step/max33046easa-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max33046easa.step/max33046easa.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc./Maxim Integrated datasheet (16 pp, sha256
d8b766822806bc60, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MAX33046EASA+
**Analog Devices Inc./Maxim Integrated** · RS-485/RS-422 ICs · SOIC-8
MAX33046EASA+ from Analog Devices Inc./Maxim Integrated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RO | output | Receiver data output, high impedance when RE is high; logic high when (VA-VB) ≥ -50mV or inputs open/shorted, low when ≤ -200mV. |
| 2 | RE | input | Receiver output enable (active low): drive low or connect to GND to enable RO, drive high to disable it; RE high with DE low forces low-power shutdown. |
| 3 | DE | input | Driver output enable: drive high to enable the driver, drive low or connect to GND to disable it (A and B high impedance). |
| 4 | DI | input | Driver input: with DE high, a low on DI forces the non-inverting output A low and inverting output B high, and a high forces A high and B low. |
| 5 | GND | power_in | Ground. |
| 6 | A | bidirectional | Non-inverting RS-485/RS-422 receiver input and driver output, with ±25V fault protection and ±40kV HBM ESD. |
| 7 | B | bidirectional | Inverting RS-485/RS-422 receiver input and driver output, with ±25V fault protection and ±40kV HBM ESD. |
| 8 | VCC | power_in | Positive supply input for 3.0V to 3.6V or 4.5V to 5.5V operation; bypass with a 0.1µF ceramic capacitor to ground. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc./Maxim Integrated |
| Package | SOIC-8 |
| Category | Communication Interface Chip |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (3.3V range) | VCC | 3 | | 3.6 | V | | 2 |
| Supply Voltage (5V range) | VCC | 4.5 | | 5.5 | V | | 2 |
| Supply Current, driver enabled | ICC | | | 6 | mA | DE = VCC, RE = 0V, no load, no switching (DI = 0V or VCC) | 2 |
| Supply Current, receiver only | ICC | | | 3.2 | mA | DE = 0V, RE = 0V | 2 |
| Shutdown Supply Current | ISHDN | | | 1 | µA | DE = 0V, RE = VCC, no switching (DI = 0V or VCC) | 2 |
| Differential Driver Output | /VOD/ | 1.5 | | | V | RL = 54Ω, Figure 1a (Note 2) | 2 |
| Differential Driver Output | /VOD/ | 2 | | | V | RL = 100Ω, Figure 1a (Note 2) | 2 |
| Change in Magnitude of Differential Driver Output Voltage | ∆VOD | -0.2 | | 0.2 | V | RL = 54Ω or 60Ω or 100Ω, Figure 1a | 2 |
| Driver Common-Mode Output Voltage | VOC | 1 | | | V | RL = 54Ω or 60Ω or 100Ω, Figure 1a | 2 |
| Change in Magnitude of Common-Mode Voltage | ∆VOC | -0.2 | | 0.2 | V | RL = 54Ω or 60Ω or 100Ω, Figure 1a (Note 2) | 2 |
| Single-Ended Driver Output Voltage High | VOH | 2.4 | | | V | A or B output, output is high, ISOURCE = 3mA | 3 |
| Single-Ended Driver Output Voltage Low | VOL | | | 0.2 | V | A or B output, output is low, ISINK = 3mA | 3 |
| Driver Short-Circuit Output Current | ISC_DR | -250 | | 250 | mA | -7V ≤ (VA or VB) ≤ +12V | 3 |
| Average Driver Short-Circuit Output Current | IAVG_SCDR | | | 250 | mA | 0V ≤ (VA or VB) ≤ VCC | 3 |
| Input Current (A, B) | IA, IB | -73 | | 125 | µA | DE = 0V, 0V ≤ VCC ≤ 5.5V, VCM = -7V to +12V | 3 |
| Receiver Input Resistance | RIN | 96 | | | kΩ | -7V ≤ VCM ≤ +12V | 3 |
| Common-Mode Voltage Range | VCM | -7 | | 12 | V | Figure 1b | 3 |
| Receiver Differential Threshold Voltage Rising | VTLH | | | -50 | mV | -7V ≤ VCM ≤ +12V | 3 |
| Receiver Differential Threshold Voltage Falling | VTHL | -200 | | | mV | -7V ≤ VCM ≤ +12V | 3 |
| Receiver Input Hysteresis | ∆VTH | | 100 | | mV | | 3 |
| Differential Input Capacitance | CA_B | | 10 | | pF | Measured between A and B, f = 1MHz | 3 |
| Output Logic Low Voltage (RO) | VOL | | | 0.4 | V | ISINK = 3mA, (VA - VB) ≤ -200mV | 3 |
| Leakage Current (RO) | IOZR | -1 | | 1 | µA | 0V ≤ VRO ≤ VCC | 3 |
| Short-Circuit Current (RO) | /IOSR/ | | | 200 | mA | 0V ≤ (VA, VB) ≤ VCC | 3 |
| Input Logic High Voltage | VIH | 2 | | | V | | 3 |
| Input Logic Low Voltage | VIL | | | 0.8 | V | | 3 |
| Input Hysteresis | VHYS | | 100 | | mV | | 3 |
| Input Leakage Current | IIN | -1 | | 1 | µA | After first transition of DE | 3 |
| DE Input Impedance on First Transition | RIN_FT | 1 | | 10 | kΩ | | 3 |
| Fault Protection (A, B Pins to GND) | | -25 | | 25 | V | | 4 |
| Thermal Shutdown Threshold | TSHDN | | 160 | | °C | Temperature rising | 4 |
| Thermal Shutdown Hysteresis | THYST | | 12 | | °C | | 4 |
| Differential Driver Propagation Delay | tDPLH, tDPHL | | | 40 | ns | RL = 54Ω, CL = 50pF (Figures 2 and 3) | 4 |
| Differential Driver Output Skew | tDSKEW | | | 9 | ns | RL = 54Ω, CL = 50pF (Note 4, Figures 2 and 3) | 5 |
| Driver Differential Output Rise or Fall Time | tLH, tHL | | 8 | 15 | ns | RL = 54Ω, CL = 50pF (Figures 2 and 3) | 5 |
| Maximum Data Rate | DRMAX | 20 | | | Mbps | | 5 |
| Driver Enable to Output High | tDZH | | | 90 | ns | RL = 110Ω, CL = 50pF (Figures 4 and 5) | 5 |
| Driver Enable to Output Low | tDZL | | | 90 | ns | RL = 110Ω, CL = 50pF (Figures 4 and 5) | 5 |
| Driver Disable Time from Low | tDLZ | | | 60 | ns | RL = 110Ω, CL = 50pF (Figures 4 and 5) | 5 |
| Driver Disable Time from High | tDHZ | | | 60 | ns | RL = 110Ω, CL = 50pF (Figures 4 and 5) | 5 |
| Driver Enable Time from Shutdown to Output High | tDZH(SHDN) | | | 170 | µs | RL = 110Ω, CL = 50pF (Note 3, Figures 4 and 6) | 5 |
| Driver Enable Time from Shutdown to Output Low | tDZL(SHDN) | | | 170 | µs | RL = 110Ω, CL = 50pF (Note 3, Figures 4 and 6) | 5 |
| Time to Shutdown (driver) | tSHDN | 50 | 800 | 1500 | ns | (Note 3) | 5 |
| Receiver Propagation Delay | tRPLH, tRPHL | | | 75 | ns | CL = 15pF (Figures 6 and 7) | 6 |
| Receiver Output Skew | tRSKEW | | | 10 | ns | CL = 15pF (Note 4, Figures 6 and 7) | 6 |
| Receiver Enable to Output High | tRZH | | | 50 | ns | RL = 1kΩ, CL = 15pF (Figure 8) | 6 |
| Receiver Enable to Output Low | tRZL | | | 50 | ns | RL = 1kΩ, CL = 15pF (Figure 8) | 6 |
| Receiver Disable Time from Low | tRLZ | | | 50 | ns | RL = 1kΩ, CL = 15pF (Figure 8) | 6 |
| Receiver Disable Time from High | tRHZ | | | 50 | ns | RL = 1kΩ, CL = 15pF (Figure 8) | 6 |
| Receiver Enable from Shutdown to Output Low | tRZL(SHDN) | | | 170 | µs | RL = 1kΩ, CL = 15pF (Note 3, Figure 8) | 6 |
| Receiver Enable from Shutdown to Output High | tRZH(SHDN) | | | 170 | µs | RL = 1kΩ, CL = 15pF (Note 3, Figure 8) | 6 |
| Time to Shutdown (receiver) | tSHDN | 50 | 800 | 1500 | ns | (Note 3) | 6 |
| Delay to Fail-Safe Operation | tD_FS | | | 10 | µs | | 6 |
| Supply Voltage | VCC | -0.3 | | 6 | V | | 2 |
| RO Voltage | RO | -0.3 | | | V | Max is VCC + 0.3V | 2 |
| DE, DI Voltage | DE, DI | -0.3 | | 6 | V | | 2 |
| A, B Voltage | A, B | -30 | | 30 | V | | 2 |
| Operating Temperature Range | | -40 | | 125 | °C | | 2 |
| Junction Temperature | | | | 150 | °C | | 2 |
| Storage Temperature | | -65 | | 150 | °C | | 2 |
| Thermal Resistance Junction to Ambient | θJA | | 136 | | °C/W | Four-layer board, SOIC 8 | 2 |
| Thermal Resistance Junction to Case | θJC | | 38 | | °C/W | Four-layer board, SOIC 8 | 2 |
## CAD (KiCad official)
- Symbol: `MAX33046EASA+`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files: `max33046easa-etched.step` / `max33046easa-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max33046easa.step` / `max33046easa.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices Inc./Maxim Integrated datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/max33045e-max33046e.pdf) (16 pp, sha256 `d8b766822806bc60`, retrieved 2026-10-31, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/max33046easa-datasheet.pdf)