main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers max3245eeai-t: viewers · Ray
max3245eeai-t-etched.glb Publish 0.1.0 · Ray
max3245eeai-t-etched.step max3245eeai-t: factory component page (tier=mfr) · Ray
max3245eeai-t-hero.glb max3245eeai-t: hero GLB from the etched model (keeps the MPN mark) · Ray
max3245eeai-t-hero.overlay.json Publish 0.1.0 · Ray
max3245eeai-t.glb Publish 0.1.0 · Ray
max3245eeai-t.kicad_mod Publish 0.1.0 · Ray
max3245eeai-t.kicad_sym Publish 0.1.0 · Ray
max3245eeai-t.lbr Publish 0.1.0 · Ray
max3245eeai-t.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 28 pins · Ray

MAX3245EEAI+T

Analog Devices Inc./Maxim Integrated · RS232 ICs · SSOP-28

MAX3245EEAI+T from Analog Devices Inc./Maxim Integrated, in a SSOP-28. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 C2+ passive Positive terminal of the inverting charge-pump capacitor.
2 C2- passive Negative terminal of the inverting charge-pump capacitor.
3 V- power_out -5.5V generated by the charge pump.
4 R1IN input RS-232 receiver 1 input (±25V input range).
5 R2IN input RS-232 receiver 2 input (±25V input range).
6 R3IN input RS-232 receiver 3 input (±25V input range).
7 R4IN input RS-232 receiver 4 input (±25V input range).
8 R5IN input RS-232 receiver 5 input (±25V input range).
9 T1OUT output RS-232 transmitter 1 output.
10 T2OUT output RS-232 transmitter 2 output.
11 T3OUT output RS-232 transmitter 3 output.
12 T3IN input TTL/CMOS transmitter 3 input; connect unused inputs to GND or VCC.
13 T2IN input TTL/CMOS transmitter 2 input; connect unused inputs to GND or VCC.
14 T1IN input TTL/CMOS transmitter 1 input; connect unused inputs to GND or VCC.
15 R5OUT tri_state TTL/CMOS receiver 5 output, high impedance when FORCEOFF is low.
16 R4OUT tri_state TTL/CMOS receiver 4 output, high impedance when FORCEOFF is low.
17 R3OUT tri_state TTL/CMOS receiver 3 output, high impedance when FORCEOFF is low.
18 R2OUT tri_state TTL/CMOS receiver 2 output, high impedance when FORCEOFF is low.
19 R1OUT tri_state TTL/CMOS receiver 1 output, high impedance when FORCEOFF is low.
20 R2OUTB output TTL/CMOS noninverting complementary receiver 2 output, always active.
21 INVALID output Valid signal detector output, active low; logic high indicates a valid RS-232 level is present on a receiver input.
22 FORCEOFF input Force-off input, active low; drive low to shut down transmitters, receivers (except R2OUTB) and charge pump, overriding AutoShutdown Plus and FORCEON.
23 FORCEON input Force-on input, active high; drive high to override AutoShutdown Plus, keeping transmitters and receivers on (FORCEOFF must be high).
24 C1- passive Negative terminal of the voltage-doubler charge-pump capacitor.
25 GND power_in Ground.
26 VCC power_in +3.0V to +5.5V single supply voltage.
27 V+ power_out +5.5V generated by the charge pump.
28 C1+ passive Positive terminal of the voltage-doubler charge-pump capacitor.

Key specifications

Parameter Value
Manufacturer Analog Devices Inc./Maxim Integrated
Package SSOP-28
Category Interface
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 3 5.5 V Single supply voltage 7
Operating temperature (E grade) TA -40 85 °C MAX32__E__ 2
Supply current, shutdown ICC 1 10 µA FORCEOFF = GND 2
Supply current, AutoShutdown Plus ICC 1 10 µA FORCEON = GND, FORCEOFF = VCC, all R_IN idle, all T_IN idle 2
Supply current, AutoShutdown Plus disabled ICC 0.3 1 mA FORCEON = FORCEOFF = VCC, no load 2
Input logic threshold low VIL 0.8 V T_IN, FORCEON, FORCEOFF 2
Input logic threshold high VIH 2.4 V T_IN, FORCEON, FORCEOFF 2
Transmitter input hysteresis 0.5 V 2
Input leakage current 0.01 1 µA T_IN, FORCEON, FORCEOFF 2
Receiver output leakage current 0.05 10 µA R_OUT (MAX3244/MAX3245), receivers disabled 2
Receiver output voltage low VOL 0.4 V IOUT = 1.6mA 2
Receiver input voltage range -25 25 V 2
Receiver input threshold low, VCC = 3.3V 0.6 1.2 V VCC = 3.3V, TA = +25°C 2
Receiver input threshold low, VCC = 5.0V 0.8 1.5 V VCC = 5.0V, TA = +25°C 2
Receiver input threshold high, VCC = 3.3V 1.5 2.4 V VCC = 3.3V, TA = +25°C 2
Receiver input threshold high, VCC = 5.0V 1.8 2.4 V VCC = 5.0V, TA = +25°C 2
Receiver input hysteresis 0.5 V 2
Receiver input resistance 3 5 7 kΩ TA = +25°C 2
Transmitter output voltage swing 5 5.4 V All transmitter outputs loaded with 3kΩ to ground 3
Transmitter output short-circuit current 60 mA 3
Transmitter output leakage current 25 µA VCC = 0 or 3V to 5.5V, VOUT = ±12V, Transmitters disabled 3
Mouse driveability transmitter output voltage 5 V T1IN = T2IN = GND, T3IN = VCC, T3OUT loaded with 3kΩ to GND, T1OUT and T2OUT loaded with 2.5mA each 3
Receiver or transmitter edge to transmitters shutdown tAUTOSHDN 15 30 60 s Figure 4b 3
Receiver or transmitter edge to transmitters enabled tWU 100 µs VCC = 5V, Figure 4b 3
Receiver threshold to INVALID low tINVL 30 µs VCC = 5V, Figure 5b (Note 2) 3
Receiver threshold to INVALID high tINVH 1 µs VCC = 5V, Figure 5b (Note 2) 3
INVALID, READY output voltage low 0.4 V IOUT = -1.6mA 3
Receiver input threshold to INVALID output low -0.3 0.3 V Figure 4a 3
Receiver input threshold to INVALID output high, positive threshold 2.7 V Figure 4a, positive threshold 3
Receiver input threshold to INVALID output high, negative threshold -2.7 V Figure 4a, negative threshold 3
Maximum data rate 250 kbps RL = 3kΩ, CL = 1000pF, one transmitter switching 4
Maximum data rate 1000 kbps 4
Receiver propagation delay tPHL tPHL 0.15 µs R_IN to R_OUT, CL = 150pF 4
Receiver propagation delay tPLH tPLH 0.15 µs R_IN to R_OUT, CL = 150pF 4
Transition-region slew rate 24 150 V/µs VCC = 3.3V, TA = +25°C, RL = 3kΩ to 7kΩ, CL = 150pF to 1000pF, measured from +3V to -3V or -3V to +3V 4
Receiver output enable time 200 ns Normal operation (MAX3245 only) 4
Receiver output disable time 200 ns Normal operation (MAX3245 only) 4
Transmitter skew /tPHL - tPLH/ 25 ns (Note 3) 4
Receiver skew /tPHL - tPLH/ 50 ns 4
VCC to GND VCC -0.3 6 V 2
V+ to GND V+ -0.3 7 V Note 1 2
V- to GND V- -7 0.3 V Note 1 2
V+ + /V-/ 13 V Note 1 2
T_IN, FORCEON, FORCEOFF to GND -0.3 6 V 2
R_IN to GND -25 25 V 2
T_OUT to GND -13.2 13.2 V 2
R_OUT, INVALID, READY to GND -0.3 V to (VCC + 0.3V) 2
Storage temperature -65 160 °C 2
Lead temperature (soldering, 10s) 300 °C 2
Soldering temperature (reflow) 260 °C 2

CAD (KiCad official)

  • Symbol: MAX3245EEAI+T
  • Footprint: Package_SO:SSOP-28_5.3x10.2mm_P0.65mm
  • 3D model: SSOP-28 (KiCad packages3D, STEP)
  • 3D model files: max3245eeai-t-etched.step / max3245eeai-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max3245eeai-t.step / max3245eeai-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices Inc./Maxim Integrated datasheet (19 pp, sha256 cb52c14514f7e6c3, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF