← Commit history

Initial commit: component/max3243ecdbr

Ray ·e7a2b40ed2 ·
2 files changed +326
README.mdadded+65
@@ -0,0 +1,65 @@+# MAX3243ECDBR++**Texas Instruments** · RS232 ICs · SSOP-28-208mil++MAX3243ECDBR from Texas Instruments, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.++## Pinout++| Pin | Name | Type | Function |+|---|---|---|---|+| 1 | C2+ | passive | Positive terminal of voltage-doubler charge-pump capacitor; connect 0.1 µF at 3.3 V or 0.33 µF at 5 V. |+| 2 | C2- | passive | Negative terminal of voltage-doubler charge-pump capacitor; connect 0.1 µF at 3.3 V or 0.33 µF at 5 V. |+| 3 | V- | power_out | Negative output from charge pump supplying approximately -5 V for RS-232 signal generation. |+| 4 | RIN1 | input | RS-232 receiver input accepting -25 V to +25 V signals with 3 to 7 kΩ input impedance. |+| 5 | RIN2 | input | RS-232 receiver input accepting -25 V to +25 V signals with 3 to 7 kΩ input impedance. |+| 6 | RIN3 | input | RS-232 receiver input accepting -25 V to +25 V signals with 3 to 7 kΩ input impedance. |+| 7 | RIN4 | input | RS-232 receiver input accepting -25 V to +25 V signals with 3 to 7 kΩ input impedance. |+| 8 | RIN5 | input | RS-232 receiver input accepting -25 V to +25 V signals with 3 to 7 kΩ input impedance. |+| 9 | DOUT1 | output | RS-232 driver output producing ±5.0 to ±5.4 V into 3 kΩ load with maximum slew rate 30 V/μs. |+| 10 | DOUT2 | output | RS-232 driver output producing ±5.0 to ±5.4 V into 3 kΩ load with maximum slew rate 30 V/μs. |+| 11 | DOUT3 | output | RS-232 driver output producing ±5.0 to ±5.4 V into 3 kΩ load with maximum slew rate 30 V/μs. |+| 12 | DIN3 | input | Driver input accepting 0 V to 5.5 V logic levels with 2 V high threshold at 3.3 V VCC. |+| 13 | DIN2 | input | Driver input accepting 0 V to 5.5 V logic levels with 2 V high threshold at 3.3 V VCC. |+| 14 | DIN1 | input | Driver input accepting 0 V to 5.5 V logic levels with 2 V high threshold at 3.3 V VCC. |+| 15 | ROUT5 | output | Receiver output providing 0.4 V low to VCC-0.1 V high logic levels at 1.6 mA sink current. |+| 16 | ROUT4 | output | Receiver output providing 0.4 V low to VCC-0.1 V high logic levels at 1.6 mA sink current. |+| 17 | ROUT3 | output | Receiver output providing 0.4 V low to VCC-0.1 V high logic levels at 1.6 mA sink current. |+| 18 | ROUT2 | output | Receiver output providing 0.4 V low to VCC-0.1 V high logic levels at 1.6 mA sink current. |+| 19 | ROUT1 | output | Receiver output providing 0.4 V low to VCC-0.1 V high logic levels at 1.6 mA sink current. |+| 20 | ROUT2B | output | Always-active noninverting receiver output following RIN2 input and remaining operational during auto-powerdown. |+| 21 | INVALID | output | Invalid output pin; low when all receiver inputs remain between -0.3 V and +0.3 V for more than 30 µs. |+| 22 | FORCEOFF | input | Auto-powerdown control input; low forces device to 1 µA standby mode with drivers and receivers disabled. |+| 23 | FORCEON | input | Auto-powerdown control input; low with FORCEOFF high enables automatic powerdown on invalid RS-232 signals. |+| 24 | C1- | passive | Negative terminal of voltage-doubler charge-pump capacitor; connect 0.1 µF at 3.3 V or 0.047 µF at 5 V. |+| 25 | GND | power_in | Ground reference for logic and RS-232 signal levels. |+| 26 | VCC | power_in | Supply voltage input from 3 V to 5.5 V for logic circuits and internal charge pump. |+| 27 | V+ | power_out | Positive output from charge pump supplying approximately +5 V for RS-232 signal generation. |+| 28 | C1+ | passive | Positive terminal of voltage-doubler charge-pump capacitor; connect 0.1 µF at 3.3 V or 0.047 µF at 5 V. |++## Key specifications++| Parameter | Value |+|---|---|+| Manufacturer | Texas Instruments |+| Package | SSOP-28-208mil |+| Category | Interface |+| Pins | 28 |++## CAD (KiCad official)++- Symbol: `MAX3243ECDBR`+- Footprint: `Package_SO:SSOP-28_5.3x10.2mm_P0.65mm`+- 3D model: SSOP-28-208mil (KiCad packages3D, STEP)+- 3D model files: `max3243ecdbr-etched.step` / `max3243ecdbr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max3243ecdbr.step` / `max3243ecdbr.glb` are the bare package body.++## Provenance++Data extracted from the manufacturer datasheet, not a distributor listing:++- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/max3243e) (32 pp, sha256 `cb5d72a205b7a01b`, retrieved 2026-09-23, tier: lcsc)+- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.2`, primary `claude-haiku-4-5-20251001` (text), consensus `claude-sonnet-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **CAD:** KiCad official libraries (CC-BY-SA 4.0).++[Datasheet PDF](docs/max3243ecdbr-datasheet.pdf)
page.jsonadded+261
@@ -0,0 +1,261 @@+{+  "slug": "max3243ecdbr",+  "version": "0.1.0",+  "type": "component",+  "description": "Texas Instruments RS232 ICs, SSOP-28-208mil. Datasheet-verified pinout, KiCad symbol/footprint/3D.",+  "tags": [+    "component",+    "interface",+    "max3243ecdbr",+    "factory-2.0.0",+    "extractor-text"+  ],+  "dependencies": {},+  "hero": {+    "type": "image",+    "path": "docs/hero.png"+  },+  "files": [+    "page.json",+    "README.md",+    "max3243ecdbr.kicad_sym",+    "max3243ecdbr.kicad_mod",+    "max3243ecdbr.glb",+    "max3243ecdbr.step",+    "max3243ecdbr.lbr",+    "docs/hero.png",+    "docs/max3243ecdbr-datasheet.pdf",+    "viewers/symbol.html",+    "viewers/footprint.html"+  ],+  "component": {+    "mpn": "MAX3243ECDBR",+    "manufacturer": "Texas Instruments",+    "package": "SSOP-28-208mil",+    "pin_count": 28,+    "category": "Interface",+    "subcategory": "RS232 ICs",+    "datasheet": "https://www.ti.com/cn/lit/gpn/max3243e",+    "parts": {+      "symbol": "max3243ecdbr.kicad_sym",+      "footprint": "max3243ecdbr.kicad_mod",+      "model_3d": "max3243ecdbr-etched.glb",+      "model_3d_plain": "max3243ecdbr.glb",+      "model_3d_step": "max3243ecdbr-etched.step",+      "model_3d_step_plain": "max3243ecdbr.step",+      "lbr": "max3243ecdbr.lbr"+    },+    "distributor_links": {+      "lcsc": "C2671247"+    },+    "pins": [+      {+        "number": "1",+        "name": "C2+",+        "type": "passive",+        "description": "Positive terminal of voltage-doubler charge-pump capacitor; connect 0.1 µF at 3.3 V or 0.33 µF at 5 V."+      },+      {+        "number": "2",+        "name": "C2-",+        "type": "passive",+        "description": "Negative terminal of voltage-doubler charge-pump capacitor; connect 0.1 µF at 3.3 V or 0.33 µF at 5 V."+      },+      {+        "number": "3",+        "name": "V-",+        "type": "power_out",+        "description": "Negative output from charge pump supplying approximately -5 V for RS-232 signal generation."+      },+      {+        "number": "4",+        "name": "RIN1",+        "type": "input",+        "description": "RS-232 receiver input accepting -25 V to +25 V signals with 3 to 7 kΩ input impedance."+      },+      {+        "number": "5",+        "name": "RIN2",+        "type": "input",+        "description": "RS-232 receiver input accepting -25 V to +25 V signals with 3 to 7 kΩ input impedance."+      },+      {+        "number": "6",+        "name": "RIN3",+        "type": "input",+        "description": "RS-232 receiver input accepting -25 V to +25 V signals with 3 to 7 kΩ input impedance."+      },+      {+        "number": "7",+        "name": "RIN4",+        "type": "input",+        "description": "RS-232 receiver input accepting -25 V to +25 V signals with 3 to 7 kΩ input impedance."+      },+      {+        "number": "8",+        "name": "RIN5",+        "type": "input",+        "description": "RS-232 receiver input accepting -25 V to +25 V signals with 3 to 7 kΩ input impedance."+      },+      {+        "number": "9",+        "name": "DOUT1",+        "type": "output",+        "description": "RS-232 driver output producing ±5.0 to ±5.4 V into 3 kΩ load with maximum slew rate 30 V/μs."+      },+      {+        "number": "10",+        "name": "DOUT2",+        "type": "output",+        "description": "RS-232 driver output producing ±5.0 to ±5.4 V into 3 kΩ load with maximum slew rate 30 V/μs."+      },+      {+        "number": "11",+        "name": "DOUT3",+        "type": "output",+        "description": "RS-232 driver output producing ±5.0 to ±5.4 V into 3 kΩ load with maximum slew rate 30 V/μs."+      },+      {+        "number": "12",+        "name": "DIN3",+        "type": "input",+        "description": "Driver input accepting 0 V to 5.5 V logic levels with 2 V high threshold at 3.3 V VCC."+      },+      {+        "number": "13",+        "name": "DIN2",+        "type": "input",+        "description": "Driver input accepting 0 V to 5.5 V logic levels with 2 V high threshold at 3.3 V VCC."+      },+      {+        "number": "14",+        "name": "DIN1",+        "type": "input",+        "description": "Driver input accepting 0 V to 5.5 V logic levels with 2 V high threshold at 3.3 V VCC."+      },+      {+        "number": "15",+        "name": "ROUT5",+        "type": "output",+        "description": "Receiver output providing 0.4 V low to VCC-0.1 V high logic levels at 1.6 mA sink current."+      },+      {+        "number": "16",+        "name": "ROUT4",+        "type": "output",+        "description": "Receiver output providing 0.4 V low to VCC-0.1 V high logic levels at 1.6 mA sink current."+      },+      {+        "number": "17",+        "name": "ROUT3",+        "type": "output",+        "description": "Receiver output providing 0.4 V low to VCC-0.1 V high logic levels at 1.6 mA sink current."+      },+      {+        "number": "18",+        "name": "ROUT2",+        "type": "output",+        "description": "Receiver output providing 0.4 V low to VCC-0.1 V high logic levels at 1.6 mA sink current."+      },+      {+        "number": "19",+        "name": "ROUT1",+        "type": "output",+        "description": "Receiver output providing 0.4 V low to VCC-0.1 V high logic levels at 1.6 mA sink current."+      },+      {+        "number": "20",+        "name": "ROUT2B",+        "type": "output",+        "description": "Always-active noninverting receiver output following RIN2 input and remaining operational during auto-powerdown."+      },+      {+        "number": "21",+        "name": "INVALID",+        "type": "output",+        "description": "Invalid output pin; low when all receiver inputs remain between -0.3 V and +0.3 V for more than 30 µs."+      },+      {+        "number": "22",+        "name": "FORCEOFF",+        "type": "input",+        "description": "Auto-powerdown control input; low forces device to 1 µA standby mode with drivers and receivers disabled."+      },+      {+        "number": "23",+        "name": "FORCEON",+        "type": "input",+        "description": "Auto-powerdown control input; low with FORCEOFF high enables automatic powerdown on invalid RS-232 signals."+      },+      {+        "number": "24",+        "name": "C1-",+        "type": "passive",+        "description": "Negative terminal of voltage-doubler charge-pump capacitor; connect 0.1 µF at 3.3 V or 0.047 µF at 5 V."+      },+      {+        "number": "25",+        "name": "GND",+        "type": "power_in",+        "description": "Ground reference for logic and RS-232 signal levels."+      },+      {+        "number": "26",+        "name": "VCC",+        "type": "power_in",+        "description": "Supply voltage input from 3 V to 5.5 V for logic circuits and internal charge pump."+      },+      {+        "number": "27",+        "name": "V+",+        "type": "power_out",+        "description": "Positive output from charge pump supplying approximately +5 V for RS-232 signal generation."+      },+      {+        "number": "28",+        "name": "C1+",+        "type": "passive",+        "description": "Positive terminal of voltage-doubler charge-pump capacitor; connect 0.1 µF at 3.3 V or 0.047 µF at 5 V."+      }+    ],+    "provenance": {+      "extractor": "extract_pins 0.2",+      "factory_chain": {+        "factory": "2.0.0",+        "extractor": "extract_pins 0.2",+        "primary_model": "claude-haiku-4-5-20251001",+        "primary_mode": "text",+        "consensus_model": "claude-sonnet-5",+        "consensus": "agreed",+        "guards": "pin_guards 0.1: passed",+        "guard_notes": [],+        "pages_sent": 32,+        "cost_usd": 0.3294,+        "at": "2026-09-23T18:19:11"+      },+      "datasheet": {+        "url": "https://www.ti.com/cn/lit/gpn/max3243e",+        "pages": 32,+        "sha256": "cb5d72a205b7a01b",+        "source_tier": "lcsc"+      },+      "cad": "KiCad official (CC-BY-SA 4.0)",+      "pins": {+        "total": 28,+        "described": 28,+        "cites_pages": true,+        "refuses_to_fabricate": true+      }+    },+    "viewers": {+      "symbol": "viewers/symbol.html",+      "footprint": "viewers/footprint.html"+    }+  },+  "visibility": "public",+  "org": "adom",+  "author": {+    "name": "Ray",+    "email": "[email protected]"+  }+}\ No newline at end of file