main
Ray
Publish 0.1.0
07f9c18
MAX3238IDBR
Texas Instruments · RS232 ICs · SSOP-28-208mil
MAX3238IDBR from Texas Instruments, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C2+ | passive | Positive terminal of charge-pump capacitor C2 (external 0.1 µF or as specified for VCC in the datasheet table). |
| 2 | GND | power_in | Network ground; all device voltages are referenced to this pin. |
| 3 | C2− | passive | Negative terminal of charge-pump capacitor C2. |
| 4 | V− | power_out | Negative charge-pump output supply; absolute maximum range is −0.3 V to −7 V with respect to GND. |
| 5 | DOUT1 | output | RS-232 driver 1 output; driver output voltage range is −13.2 V to 13.2 V. |
| 6 | DOUT2 | output | RS-232 driver 2 output; driver output voltage range is −13.2 V to 13.2 V. |
| 7 | DOUT3 | output | RS-232 driver 3 output; driver output voltage range is −13.2 V to 13.2 V. |
| 8 | RIN1 | input | RS-232 receiver 1 input; receiver input voltage range is −25 V to 25 V. |
| 9 | RIN2 | input | RS-232 receiver 2 input; receiver input voltage range is −25 V to 25 V. |
| 10 | DOUT4 | output | RS-232 driver 4 output; driver output voltage range is −13.2 V to 13.2 V. |
| 11 | RIN3 | input | RS-232 receiver 3 input; receiver input voltage range is −25 V to 25 V. |
| 12 | DOUT5 | output | RS-232 driver 5 output; driver output voltage range is −13.2 V to 13.2 V. |
| 13 | FORCEON | input | Auto-powerdown plus control input with input range 0 V to 5.5 V; FORCEON low with FORCEOFF high enables auto-powerdown plus. |
| 14 | FORCEOFF | input | Driver/receiver power-off control input with input range 0 V to 5.5 V; low powers off the drivers and receivers (outputs high impedance). |
| 15 | INVALID | output | Output that is high when valid RS-232 receiver data is present and low when all receiver inputs are invalid; output range is −0.3 V to VCC + 0.3 V. |
| 16 | ROUT1B | output | Always-active noninverting receiver 1 output that remains active when the device is powered down, for ring-indicator use. |
| 17 | DIN5 | input | Driver 5 logic input with range 0 V to 5.5 V. |
| 18 | ROUT3 | output | Receiver 3 logic output. |
| 19 | DIN4 | input | Driver 4 logic input with range 0 V to 5.5 V. |
| 20 | ROUT2 | output | Receiver 2 logic output. |
| 21 | ROUT1 | output | Receiver 1 logic output. |
| 22 | DIN3 | input | Driver 3 logic input with range 0 V to 5.5 V. |
| 23 | DIN2 | input | Driver 2 logic input with range 0 V to 5.5 V. |
| 24 | DIN1 | input | Driver 1 logic input with range 0 V to 5.5 V. |
| 25 | C1− | passive | Negative terminal of charge-pump capacitor C1. |
| 26 | VCC | power_in | Supply voltage: 3 V to 5.5 V (3.0-3.6 V at 3.3 V nominal or 4.5-5.5 V at 5 V nominal); absolute maximum −0.3 V to 6 V. |
| 27 | V+ | power_out | Positive charge-pump output supply; absolute maximum range is −0.3 V to 7 V with respect to GND. |
| 28 | C1+ | passive | Positive terminal of charge-pump capacitor C1. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-28-208mil |
| Category | Interface |
| Pins | 28 |
CAD (KiCad official)
- Symbol:
MAX3238IDBR - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
max3238idbr-etched.step/max3238idbr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max3238idbr.step/max3238idbr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (19 pp, sha256
eac40e856c766465, retrieved 2026-10-12, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MAX3238IDBR
**Texas Instruments** · RS232 ICs · SSOP-28-208mil
MAX3238IDBR from Texas Instruments, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C2+ | passive | Positive terminal of charge-pump capacitor C2 (external 0.1 µF or as specified for VCC in the datasheet table). |
| 2 | GND | power_in | Network ground; all device voltages are referenced to this pin. |
| 3 | C2− | passive | Negative terminal of charge-pump capacitor C2. |
| 4 | V− | power_out | Negative charge-pump output supply; absolute maximum range is −0.3 V to −7 V with respect to GND. |
| 5 | DOUT1 | output | RS-232 driver 1 output; driver output voltage range is −13.2 V to 13.2 V. |
| 6 | DOUT2 | output | RS-232 driver 2 output; driver output voltage range is −13.2 V to 13.2 V. |
| 7 | DOUT3 | output | RS-232 driver 3 output; driver output voltage range is −13.2 V to 13.2 V. |
| 8 | RIN1 | input | RS-232 receiver 1 input; receiver input voltage range is −25 V to 25 V. |
| 9 | RIN2 | input | RS-232 receiver 2 input; receiver input voltage range is −25 V to 25 V. |
| 10 | DOUT4 | output | RS-232 driver 4 output; driver output voltage range is −13.2 V to 13.2 V. |
| 11 | RIN3 | input | RS-232 receiver 3 input; receiver input voltage range is −25 V to 25 V. |
| 12 | DOUT5 | output | RS-232 driver 5 output; driver output voltage range is −13.2 V to 13.2 V. |
| 13 | FORCEON | input | Auto-powerdown plus control input with input range 0 V to 5.5 V; FORCEON low with FORCEOFF high enables auto-powerdown plus. |
| 14 | FORCEOFF | input | Driver/receiver power-off control input with input range 0 V to 5.5 V; low powers off the drivers and receivers (outputs high impedance). |
| 15 | INVALID | output | Output that is high when valid RS-232 receiver data is present and low when all receiver inputs are invalid; output range is −0.3 V to VCC + 0.3 V. |
| 16 | ROUT1B | output | Always-active noninverting receiver 1 output that remains active when the device is powered down, for ring-indicator use. |
| 17 | DIN5 | input | Driver 5 logic input with range 0 V to 5.5 V. |
| 18 | ROUT3 | output | Receiver 3 logic output. |
| 19 | DIN4 | input | Driver 4 logic input with range 0 V to 5.5 V. |
| 20 | ROUT2 | output | Receiver 2 logic output. |
| 21 | ROUT1 | output | Receiver 1 logic output. |
| 22 | DIN3 | input | Driver 3 logic input with range 0 V to 5.5 V. |
| 23 | DIN2 | input | Driver 2 logic input with range 0 V to 5.5 V. |
| 24 | DIN1 | input | Driver 1 logic input with range 0 V to 5.5 V. |
| 25 | C1− | passive | Negative terminal of charge-pump capacitor C1. |
| 26 | VCC | power_in | Supply voltage: 3 V to 5.5 V (3.0-3.6 V at 3.3 V nominal or 4.5-5.5 V at 5 V nominal); absolute maximum −0.3 V to 6 V. |
| 27 | V+ | power_out | Positive charge-pump output supply; absolute maximum range is −0.3 V to 7 V with respect to GND. |
| 28 | C1+ | passive | Positive terminal of charge-pump capacitor C1. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-28-208mil |
| Category | Interface |
| Pins | 28 |
## CAD (KiCad official)
- Symbol: `MAX3238IDBR`
- Footprint: `Package_SO:SSOP-28_5.3x10.2mm_P0.65mm`
- 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files: `max3238idbr-etched.step` / `max3238idbr-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max3238idbr.step` / `max3238idbr.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/max3238) (19 pp, sha256 `eac40e856c766465`, retrieved 2026-10-12, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/max3238idbr-datasheet.pdf)