← Commit history

Publish 0.1.2

Ray ·8e6e434b06 · ·parent 8333843
4 files changed +146−146
README.md+64−66
@@ -2,40 +2,40 @@  **Texas Instruments** · Pre-ordered Chips · SSOP-28-208mil -MAX3238EIDBR from Texas Instruments, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.+MAX3238EIDBR from Texas Instruments, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.  ## Pinout  | Pin | Name | Type | Function | |---|---|---|---|-| 1 | C2+ | passive | Positive terminal of charge-pump capacitor C2, connected to C2− through the external capacitor (0.1 µF at VCC = 3.3 V ± 0.15 V). |-| 2 | GND | power_in | Ground; all supply voltages are specified with respect to network GND. |-| 3 | C2− | passive | Negative terminal of charge-pump capacitor C2. |-| 4 | V− | power_out | Negative charge-pump output supply (about −5.5 V), abs max −0.3 V to −7 V, decoupled with capacitor C4. |-| 5 | DOUT1 | output | RS-232 driver 1 output with ±15 kV HBM ESD protection, swings at least ±5 V into 3 kΩ. |-| 6 | DOUT2 | output | RS-232 driver 2 output with ±15 kV HBM ESD protection, swings at least ±5 V into 3 kΩ. |-| 7 | DOUT3 | output | RS-232 driver 3 output with ±15 kV HBM ESD protection, swings at least ±5 V into 3 kΩ. |-| 8 | RIN1 | input | RS-232 receiver 1 input with ±15 kV HBM ESD protection, 5 kΩ nominal input resistance, ±25 V input range. |-| 9 | RIN2 | input | RS-232 receiver 2 input with ±15 kV HBM ESD protection, 5 kΩ nominal input resistance, ±25 V input range. |-| 10 | DOUT4 | output | RS-232 driver 4 output with ±15 kV HBM ESD protection, swings at least ±5 V into 3 kΩ. |-| 11 | RIN3 | input | RS-232 receiver 3 input with ±15 kV HBM ESD protection, 5 kΩ nominal input resistance, ±25 V input range. |-| 12 | DOUT5 | output | RS-232 driver 5 output with ±15 kV HBM ESD protection, swings at least ±5 V into 3 kΩ. |-| 13 | FORCEON | input | Logic control input; with FORCEOFF high, high disables auto-powerdown plus and low enables it (low level ≤ 0.8 V). |-| 14 | FORCEOFF | input | Logic control input; low powers off the drivers and charge pump (receivers except ROUT1B disabled), high enables operation (low level ≤ 0.8 V). |-| 15 | INVALID | output | Valid-signal output; high if any receiver input is above 2.7 V or below −2.7 V, low if all receiver inputs stay between −0.3 V and 0.3 V for more than 30 µs. |-| 16 | ROUT1B | output | Always-active noninverting receiver 1 output that remains active while the device is powered down. |-| 17 | DIN5 | input | Driver 5 logic input; accepts 5.5 V logic with high level ≥ 2 V at VCC = 3.3 V. |-| 18 | ROUT3 | output | Receiver 3 logic output, high impedance when FORCEOFF is low. |-| 19 | DIN4 | input | Driver 4 logic input; accepts 5.5 V logic with high level ≥ 2 V at VCC = 3.3 V. |-| 20 | ROUT2 | output | Receiver 2 logic output, high impedance when FORCEOFF is low. |-| 21 | ROUT1 | output | Receiver 1 logic output, high impedance when FORCEOFF is low. |-| 22 | DIN3 | input | Driver 3 logic input; accepts 5.5 V logic with high level ≥ 2 V at VCC = 3.3 V. |-| 23 | DIN2 | input | Driver 2 logic input; accepts 5.5 V logic with high level ≥ 2 V at VCC = 3.3 V. |-| 24 | DIN1 | input | Driver 1 logic input; accepts 5.5 V logic with high level ≥ 2 V at VCC = 3.3 V. |-| 25 | C1− | passive | Negative terminal of charge-pump capacitor C1. |-| 26 | VCC | power_in | Supply voltage input, 3 V to 5.5 V (abs max −0.3 V to 6 V), bypassed with 0.1 µF. |-| 27 | V+ | power_out | Positive charge-pump output supply (about +5.5 V), abs max −0.3 V to 7 V, decoupled with capacitor C3. |-| 28 | C1+ | passive | Positive terminal of charge-pump capacitor C1, connected to C1− through the external capacitor. |+| 1 | C2+ | passive | Positive terminal of charge-pump capacitor C2 connected between C2+ and C2−. |+| 2 | GND | power_in | Ground reference for all device voltages. |+| 3 | C2− | passive | Negative terminal of charge-pump capacitor C2 connected between C2+ and C2−. |+| 4 | V− | power_out | Charge-pump generated negative supply (about −5.5 V) with absolute maximum of −7 V, decoupled by capacitor C4. |+| 5 | DOUT1 | output | RS-232 driver 1 output with ±15 kV HBM ESD protection and output voltage range of ±13.2 V maximum. |+| 6 | DOUT2 | output | RS-232 driver 2 output with ±15 kV HBM ESD protection and output voltage range of ±13.2 V maximum. |+| 7 | DOUT3 | output | RS-232 driver 3 output with ±15 kV HBM ESD protection and output voltage range of ±13.2 V maximum. |+| 8 | RIN1 | input | RS-232 receiver 1 input with ±15 kV HBM ESD protection, ±25 V input range and 5 kΩ typical input resistance. |+| 9 | RIN2 | input | RS-232 receiver 2 input with ±15 kV HBM ESD protection, ±25 V input range and 5 kΩ typical input resistance. |+| 10 | DOUT4 | output | RS-232 driver 4 output with ±15 kV HBM ESD protection and output voltage range of ±13.2 V maximum. |+| 11 | RIN3 | input | RS-232 receiver 3 input with ±15 kV HBM ESD protection, ±25 V input range and 5 kΩ typical input resistance. |+| 12 | DOUT5 | output | RS-232 driver 5 output with ±15 kV HBM ESD protection and output voltage range of ±13.2 V maximum. |+| 13 | FORCEON | input | Logic input that, when high with FORCEOFF high, disables auto-powerdown plus; when low with FORCEOFF high, auto-powerdown plus is enabled (high-level input 2 V min at 3.3 V, 2.4 V min at 5 V). |+| 14 | FORCEOFF | input | Logic input that powers off drivers and charge pump when low (driver outputs high-impedance, ROUT2/ROUT3 high-impedance) while ROUT1B stays active; maximum input voltage 6 V. |+| 15 | INVALID | output | Valid-signal output that is high if any receiver input is above 2.7 V or below −2.7 V, and low when all receiver inputs stay between −0.3 V and 0.3 V for more than 30 µs. |+| 16 | ROUT1B | output | Always-active noninverting output of receiver 1 that remains active while the device is powered down, allowing ring-indicator use. |+| 17 | DIN5 | input | Driver 5 logic input (2 V min high at 3.3 V, 2.4 V min at 5 V, 0.8 V max low, accepts up to 5.5 V). |+| 18 | ROUT3 | output | Receiver 3 logic output, high-impedance when FORCEOFF is low; VOH at least VCC − 0.6 V at −1 mA. |+| 19 | DIN4 | input | Driver 4 logic input (2 V min high at 3.3 V, 2.4 V min at 5 V, 0.8 V max low, accepts up to 5.5 V). |+| 20 | ROUT2 | output | Receiver 2 logic output, high-impedance when FORCEOFF is low; VOH at least VCC − 0.6 V at −1 mA. |+| 21 | ROUT1 | output | Receiver 1 logic output, high-impedance when FORCEOFF is low; VOH at least VCC − 0.6 V at −1 mA. |+| 22 | DIN3 | input | Driver 3 logic input (2 V min high at 3.3 V, 2.4 V min at 5 V, 0.8 V max low, accepts up to 5.5 V). |+| 23 | DIN2 | input | Driver 2 logic input (2 V min high at 3.3 V, 2.4 V min at 5 V, 0.8 V max low, accepts up to 5.5 V). |+| 24 | DIN1 | input | Driver 1 logic input (2 V min high at 3.3 V, 2.4 V min at 5 V, 0.8 V max low, accepts up to 5.5 V). |+| 25 | C1− | passive | Negative terminal of charge-pump capacitor C1 connected between C1+ and C1−. |+| 26 | VCC | power_in | Supply voltage input of 3 V to 3.6 V or 4.5 V to 5.5 V recommended (−0.3 V to 6 V absolute maximum), bypassed with 0.1 µF. |+| 27 | V+ | power_out | Charge-pump generated positive supply (about +5.5 V) with absolute maximum of 7 V, decoupled by capacitor C3. |+| 28 | C1+ | passive | Positive terminal of charge-pump capacitor C1 connected between C1+ and C1−. |  ## Key specifications @@ -52,55 +52,53 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Supply voltage range VCC | VCC | -0.3 |  | 6 | V |  | 5 |-| Positive-output supply voltage range V+ | V+ | -0.3 |  | 7 | V |  | 5 |-| Negative-output supply voltage range V- | V- | 0.3 |  | -7 | V |  | 5 |-| Supply voltage difference V+ - V- | V+ - V- |  |  | 13 | V |  | 5 |-| Driver input voltage range (FORCEOFF, FORCEON) | VI | -0.3 |  | 6 | V | Driver (FORCEOFF, FORCEON) | 5 |-| Receiver input voltage range | VI | -25 |  | 25 | V | Receiver | 5 |-| Driver output voltage range | VO | -13.2 |  | 13.2 | V | Driver | 5 |-| Package thermal impedance, DB package | θJA |  |  | 62 | °C/W | DB package | 5 |-| Operating virtual junction temperature | TJ |  |  | 150 | °C |  | 5 |-| Storage temperature range | Tstg | -65 |  | 150 | °C |  | 5 | | Supply voltage, VCC = 3.3 V | VCC | 3 | 3.3 | 3.6 | V | VCC = 3.3 V | 5 | | Supply voltage, VCC = 5 V | VCC | 4.5 | 5 | 5.5 | V | VCC = 5 V | 5 | | Driver and control high-level input voltage (DIN, FORCEOFF) | VIH | 2 |  | 5.5 | V | DIN, FORCEOFF, VCC = 3.3 V | 5 | | Driver and control high-level input voltage (FORCEON) | VIH | 2.4 |  | 5.5 | V | FORCEON, VCC = 5 V | 5 | | Driver and control low-level input voltage | VIL | 0 |  | 0.8 | V | DIN, FORCEOFF, FORCEON | 5 | | Receiver input voltage | VI | -25 |  | 25 | V |  | 5 |-| Operating free-air temperature | TA | -40 |  | 85 | °C | MAX3238EI | 5 |-| Input leakage current | II | -1 | 0.01 | 1 | µA | FORCEOFF, FORCEON | 5 |-| Supply current, auto-powerdown plus disabled | ICC |  | 0.5 | 2 | mA | No load, FORCEOFF and FORCEON at VCC | 5 |-| Supply current, powered off | ICC |  | 1 | 10 | µA | No load, FORCEOFF at GND | 5 |-| Supply current, auto-powerdown plus enabled | ICC |  | 1 | 10 | µA | No load, FORCEOFF at VCC, FORCEON at GND, All RIN are open or grounded | 5 |-| High-level output voltage | VOH | 5 |  | 5.4 | V | All DOUT at RL = 3 kΩ to GND | 6 |-| Low-level output voltage | VOL | -5.4 |  | -5 | V | All DOUT at RL = 3 kΩ to GND | 6 |+| Operating free-air temperature, MAX3238EI | TA | -40 |  | 85 | °C | MAX3238EI | 5 |+| VCC supply voltage range | VCC | -0.3 |  | 6 | V |  | 5 |+| V+ positive-output supply voltage range | V+ | -0.3 |  | 7 | V |  | 5 |+| V- negative-output supply voltage range | V- | -7 |  | 0.3 | V |  | 5 |+| V+, V- supply voltage difference | V+, V- |  |  | 13 | V |  | 5 |+| Driver input voltage range (FORCEOFF, FORCEON) | VI | -0.3 |  | 6 | V | Driver (FORCEOFF, FORCEON) | 5 |+| Receiver input voltage range | VI | -25 |  | 25 | V | Receiver | 5 |+| Driver output voltage range | VO | -13.2 |  | 13.2 | V | Driver | 5 |+| Receiver output voltage range (INVALID) | VO | -0.3 |  |  | V | Receiver (INVALID); printed maximum is VCC + 0.3 V | 5 |+| Package thermal impedance, DB package | θJA |  | 62 |  | °C/W | DB package | 5 |+| Operating virtual junction temperature | TJ |  |  | 150 | °C |  | 5 |+| Storage temperature range | Tstg | -65 |  | 150 | °C |  | 5 |+| High-level output voltage (driver) | VOH | 5 | 5.4 |  | V | All DOUT at RL = 3 kΩ to GND | 6 |+| Low-level output voltage (driver) | VOL |  | -5.4 | -5 | V | All DOUT at RL = 3 kΩ to GND | 6 | | High-level input current | IIH | -1 | 0.01 | 1 | µA | VI = VCC | 6 | | Low-level input current | IIL | -1 | 0.01 | 1 | µA | VI at GND | 6 |-| Short-circuit output current | IOS | -60 | 35 | 60 | mA | VCC = 3.6 V, VO = 0 V | 6 |-| Short-circuit output current | IOS | -100 | 40 | 100 | mA | VCC = 5.5 V, VO = 0 V | 6 |-| Output resistance | ro | 300 |  |  | Ω | VCC, V+, and V- = 0 V, VO = ±2 V | 6 |-| Output leakage current | IOZ | -25 |  | 25 | µA | FORCEOFF = GND; VO = ±12 V, VCC = 3 V to 3.6 V | 6 |+| Short-circuit output current, VCC = 3.6 V | IOS | -60 | 35 | 60 | mA | VCC = 3.6 V, VO = 0 V | 6 |+| Short-circuit output current, VCC = 5.5 V | IOS | -100 | 40 | 100 | mA | VCC = 5.5 V, VO = 0 V | 6 |+| Output resistance | ro | 300 |  |  | Ω | VCC, V+, and V- = 0 V, VO = ±2 V; printed maximum is 10M Ω | 6 |+| Output leakage current, VCC = 3 V to 3.6 V | IOZ | -25 |  | 25 | µA | FORCEOFF = GND, VO = ±12 V, VCC = 3 V to 3.6 V | 6 |+| Output leakage current, VCC = 4.5 V to 5.5 V | IOZ | -25 |  | 25 | µA | FORCEOFF = GND, VO = ±10 V, VCC = 4.5 V to 5.5 V | 6 | | Maximum data rate |  | 250 |  | 400 | kbit/s | CL = 1000 pF, RL = 3 kΩ, One DOUT switching, See Figure 1 | 6 |-| Pulse skew | tsk(p) |  |  | 100 | ns | CL = 150 pF to 2500 pF, RL = 3 kΩ to 7 kΩ, See Figure 2 | 6 |-| Slew rate, transition region | SR(tr) | 6 |  | 30 | V/µs | CL = 150 pF to 1000 pF | 6 |-| Slew rate, transition region | SR(tr) | 4 |  | 30 | V/µs | VCC = 3.3 V, RL = 3 kΩ to 7 kΩ, CL = 150 pF to 2500 pF | 6 |-| Low-level output voltage | VOL |  |  | 0.4 | V | IOL = 1.6 mA | 7 |-| Positive-going input threshold voltage | VIT+ | 1.5 |  | 2.4 | V | VCC = 3.3 V | 7 |-| Positive-going input threshold voltage | VIT+ | 1.8 |  | 2.4 | V | VCC = 5 V | 7 |-| Negative-going input threshold voltage | VIT- | 0.6 |  | 1.2 | V | VCC = 3.3 V | 7 |-| Negative-going input threshold voltage | VIT- | 0.8 |  | 1.5 | V | VCC = 5 V | 7 |-| Input hysteresis (VIT+ - VIT-) | Vhys |  | 0.3 |  | V |  | 7 |+| Driver pulse skew | tsk(p) |  |  | 100 | ns | CL = 150 pF to 2500 pF, RL = 3 kΩ to 7 kΩ, See Figure 2 | 6 |+| Slew rate, transition region (CL = 150 pF to 1000 pF) | SR(tr) | 6 |  | 30 | V/µs | CL = 150 pF to 1000 pF | 6 |+| Slew rate, transition region (VCC = 3.3 V) | SR(tr) | 4 |  | 30 | V/µs | VCC = 3.3 V, RL = 3 kΩ to 7 kΩ, CL = 150 pF to 2500 pF, see Figure 1 | 6 |+| Low-level output voltage (receiver) | VOL |  |  | 0.4 | V | IOL = 1.6 mA | 7 |+| Positive-going input threshold voltage, VCC = 3.3 V | VIT+ | 1.5 |  | 2.4 | V | VCC = 3.3 V | 7 |+| Positive-going input threshold voltage, VCC = 5 V | VIT+ | 1.8 |  | 2.4 | V | VCC = 5 V | 7 |+| Negative-going input threshold voltage, VCC = 3.3 V | VIT- | 0.6 |  | 1.2 | V | VCC = 3.3 V | 7 |+| Negative-going input threshold voltage, VCC = 5 V | VIT- | 0.8 |  | 1.5 | V | VCC = 5 V | 7 | | Output leakage current (except ROUT1B) | IOZ | -10 | 0.05 | 10 | µA | FORCEOFF = 0 V | 7 | | Input resistance | ri | 3 | 5 | 7 | kΩ | VI = ±3 V to ±25 V | 7 |-| Receiver input threshold for INVALID high-level output voltage | VT+(valid) | 2.7 |  |  | V | FORCEON = GND, FORCEOFF = VCC | 8 |-| Receiver input threshold for INVALID high-level output voltage | VT-(valid) |  |  | -2.7 | V | FORCEON = GND, FORCEOFF = VCC | 8 |-| Receiver input threshold for INVALID low-level output voltage | VT(invalid) | -0.3 |  | 0.3 | V | FORCEON = GND, FORCEOFF = VCC | 8 |+| Receiver input threshold for INVALID high-level output (positive) | VT+(valid) | 2.7 |  |  | V | FORCEON = GND, FORCEOFF = VCC | 8 |+| Receiver input threshold for INVALID high-level output (negative) | VT-(valid) |  |  | -2.7 | V | FORCEON = GND, FORCEOFF = VCC | 8 |+| Receiver input threshold for INVALID low-level output | VT(invalid) | -0.3 |  | 0.3 | V | FORCEON = GND, FORCEOFF = VCC | 8 | | INVALID low-level output voltage | VOL |  |  | 0.4 | V | IOL = 1.6 mA, FORCEON = GND, FORCEOFF = VCC | 8 |-| Propagation delay time, low- to high-level output (INVALID) | tvalid |  | 0.1 |  | µs |  | 8 |-| Propagation delay time, high- to low-level output (INVALID) | tinvalid |  | 50 |  | µs |  | 8 |-| Supply enable time | ten |  | 25 |  | µs |  | 8 | | Receiver or driver edge to auto-powerdown plus | tdis | 15 | 30 | 60 | s |  | 8 |+| Supply current, auto-powerdown plus disabled | ICC |  | 0.5 | 2 | mA | No load, FORCEOFF and FORCEON at VCC | 5 |+| Supply current, powered off | ICC |  | 1 | 10 | µA | No load, FORCEOFF at GND | 5 |+| Supply current, auto-powerdown plus enabled | ICC |  | 1 | 10 | µA | No load, FORCEOFF at VCC, FORCEON at GND, All RIN are open or grounded | 5 |+| Input leakage current (FORCEOFF, FORCEON) |  | -1 | 0.01 | 1 | µA |  | 5 |  ## CAD (KiCad official) @@ -113,7 +111,7 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries  Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/max3238e.pdf) (23 pp, sha256 `1d519ae7a9e53f86`, retrieved 2026-11-12, tier: manufacturer)+- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/max3238e.pdf) (23 pp, sha256 `1d519ae7a9e53f86`, retrieved 2026-11-13, tier: manufacturer) - **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). 
max3238eidbr.lbr+1−1
@@ -185,7 +185,7 @@         <technology name="">           <attribute name="MPN" value="MAX3238EIDBR" constant="no"/>           <attribute name="MANUFACTURER" value="Texas Instruments" constant="no"/>-          <attribute name="DATASHEET" value="https://www.ti.com/lit/ds/symlink/max3238eidbr.pdf" constant="no"/>+          <attribute name="DATASHEET" value="https://www.ti.com/lit/ds/symlink/max3238e.pdf" constant="no"/>           <attribute name="ADOM_WIKI" value="https://wiki.adom.inc/adom/max3238eidbr" constant="no"/>           <attribute name="MOUSER_PN" value="595-MAX3238EIDBR" constant="no"/>           <attribute name="DIGIKEY_PN" value="296-19817-2-ND" constant="no"/>
package.json+39−39
@@ -1,6 +1,6 @@ {   "slug": "max3238eidbr",-  "version": "0.1.1",+  "version": "0.1.2",   "type": "component",   "description": "Texas Instruments Pre-ordered Chips, SSOP-28-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",   "tags": [@@ -28,8 +28,7 @@     "viewers/symbol.html",     "viewers/footprint.html",     "max3238eidbr-hero.glb",-    "max3238eidbr-hero.overlay.json",-    "max3238eidbr-etched.glb"+    "max3238eidbr-hero.overlay.json"   ],   "component": {     "mpn": "MAX3238EIDBR",@@ -43,7 +42,7 @@       "symbol": "max3238eidbr.kicad_sym",       "footprint": "max3238eidbr.kicad_mod",       "model_3d": "max3238eidbr-hero.glb",-      "model_3d_plain": "max3238eidbr-etched.glb",+      "model_3d_plain": "max3238eidbr.glb",       "model_3d_step": "max3238eidbr-etched.step",       "model_3d_step_plain": "max3238eidbr.step",       "lbr": "max3238eidbr.lbr"@@ -54,7 +53,7 @@       "mouser": "595-MAX3238EIDBR"     },     "distributor_check": {-      "checked_at": "2026-11-12T08:03:13Z",+      "checked_at": "2026-11-13T01:26:46Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "296-19817-2-ND",@@ -70,169 +69,169 @@         "number": "1",         "name": "C2+",         "type": "passive",-        "description": "Positive terminal of charge-pump capacitor C2, connected to C2− through the external capacitor (0.1 µF at VCC = 3.3 V ± 0.15 V)."+        "description": "Positive terminal of charge-pump capacitor C2 connected between C2+ and C2−."       },       {         "number": "2",         "name": "GND",         "type": "power_in",-        "description": "Ground; all supply voltages are specified with respect to network GND."+        "description": "Ground reference for all device voltages."       },       {         "number": "3",         "name": "C2−",         "type": "passive",-        "description": "Negative terminal of charge-pump capacitor C2."+        "description": "Negative terminal of charge-pump capacitor C2 connected between C2+ and C2−."       },       {         "number": "4",         "name": "V−",         "type": "power_out",-        "description": "Negative charge-pump output supply (about −5.5 V), abs max −0.3 V to −7 V, decoupled with capacitor C4."+        "description": "Charge-pump generated negative supply (about −5.5 V) with absolute maximum of −7 V, decoupled by capacitor C4."       },       {         "number": "5",         "name": "DOUT1",         "type": "output",-        "description": "RS-232 driver 1 output with ±15 kV HBM ESD protection, swings at least ±5 V into 3 kΩ."+        "description": "RS-232 driver 1 output with ±15 kV HBM ESD protection and output voltage range of ±13.2 V maximum."       },       {         "number": "6",         "name": "DOUT2",         "type": "output",-        "description": "RS-232 driver 2 output with ±15 kV HBM ESD protection, swings at least ±5 V into 3 kΩ."+        "description": "RS-232 driver 2 output with ±15 kV HBM ESD protection and output voltage range of ±13.2 V maximum."       },       {         "number": "7",         "name": "DOUT3",         "type": "output",-        "description": "RS-232 driver 3 output with ±15 kV HBM ESD protection, swings at least ±5 V into 3 kΩ."+        "description": "RS-232 driver 3 output with ±15 kV HBM ESD protection and output voltage range of ±13.2 V maximum."       },       {         "number": "8",         "name": "RIN1",         "type": "input",-        "description": "RS-232 receiver 1 input with ±15 kV HBM ESD protection, 5 kΩ nominal input resistance, ±25 V input range."+        "description": "RS-232 receiver 1 input with ±15 kV HBM ESD protection, ±25 V input range and 5 kΩ typical input resistance."       },       {         "number": "9",         "name": "RIN2",         "type": "input",-        "description": "RS-232 receiver 2 input with ±15 kV HBM ESD protection, 5 kΩ nominal input resistance, ±25 V input range."+        "description": "RS-232 receiver 2 input with ±15 kV HBM ESD protection, ±25 V input range and 5 kΩ typical input resistance."       },       {         "number": "10",         "name": "DOUT4",         "type": "output",-        "description": "RS-232 driver 4 output with ±15 kV HBM ESD protection, swings at least ±5 V into 3 kΩ."+        "description": "RS-232 driver 4 output with ±15 kV HBM ESD protection and output voltage range of ±13.2 V maximum."       },       {         "number": "11",         "name": "RIN3",         "type": "input",-        "description": "RS-232 receiver 3 input with ±15 kV HBM ESD protection, 5 kΩ nominal input resistance, ±25 V input range."+        "description": "RS-232 receiver 3 input with ±15 kV HBM ESD protection, ±25 V input range and 5 kΩ typical input resistance."       },       {         "number": "12",         "name": "DOUT5",         "type": "output",-        "description": "RS-232 driver 5 output with ±15 kV HBM ESD protection, swings at least ±5 V into 3 kΩ."+        "description": "RS-232 driver 5 output with ±15 kV HBM ESD protection and output voltage range of ±13.2 V maximum."       },       {         "number": "13",         "name": "FORCEON",         "type": "input",-        "description": "Logic control input; with FORCEOFF high, high disables auto-powerdown plus and low enables it (low level ≤ 0.8 V)."+        "description": "Logic input that, when high with FORCEOFF high, disables auto-powerdown plus; when low with FORCEOFF high, auto-powerdown plus is enabled (high-level input 2 V min at 3.3 V, 2.4 V min at 5 V)."       },       {         "number": "14",         "name": "FORCEOFF",         "type": "input",-        "description": "Logic control input; low powers off the drivers and charge pump (receivers except ROUT1B disabled), high enables operation (low level ≤ 0.8 V)."+        "description": "Logic input that powers off drivers and charge pump when low (driver outputs high-impedance, ROUT2/ROUT3 high-impedance) while ROUT1B stays active; maximum input voltage 6 V."       },       {         "number": "15",         "name": "INVALID",         "type": "output",-        "description": "Valid-signal output; high if any receiver input is above 2.7 V or below −2.7 V, low if all receiver inputs stay between −0.3 V and 0.3 V for more than 30 µs."+        "description": "Valid-signal output that is high if any receiver input is above 2.7 V or below −2.7 V, and low when all receiver inputs stay between −0.3 V and 0.3 V for more than 30 µs."       },       {         "number": "16",         "name": "ROUT1B",         "type": "output",-        "description": "Always-active noninverting receiver 1 output that remains active while the device is powered down."+        "description": "Always-active noninverting output of receiver 1 that remains active while the device is powered down, allowing ring-indicator use."       },       {         "number": "17",         "name": "DIN5",         "type": "input",-        "description": "Driver 5 logic input; accepts 5.5 V logic with high level ≥ 2 V at VCC = 3.3 V."+        "description": "Driver 5 logic input (2 V min high at 3.3 V, 2.4 V min at 5 V, 0.8 V max low, accepts up to 5.5 V)."       },       {         "number": "18",         "name": "ROUT3",         "type": "output",-        "description": "Receiver 3 logic output, high impedance when FORCEOFF is low."+        "description": "Receiver 3 logic output, high-impedance when FORCEOFF is low; VOH at least VCC − 0.6 V at −1 mA."       },       {         "number": "19",         "name": "DIN4",         "type": "input",-        "description": "Driver 4 logic input; accepts 5.5 V logic with high level ≥ 2 V at VCC = 3.3 V."+        "description": "Driver 4 logic input (2 V min high at 3.3 V, 2.4 V min at 5 V, 0.8 V max low, accepts up to 5.5 V)."       },       {         "number": "20",         "name": "ROUT2",         "type": "output",-        "description": "Receiver 2 logic output, high impedance when FORCEOFF is low."+        "description": "Receiver 2 logic output, high-impedance when FORCEOFF is low; VOH at least VCC − 0.6 V at −1 mA."       },       {         "number": "21",         "name": "ROUT1",         "type": "output",-        "description": "Receiver 1 logic output, high impedance when FORCEOFF is low."+        "description": "Receiver 1 logic output, high-impedance when FORCEOFF is low; VOH at least VCC − 0.6 V at −1 mA."       },       {         "number": "22",         "name": "DIN3",         "type": "input",-        "description": "Driver 3 logic input; accepts 5.5 V logic with high level ≥ 2 V at VCC = 3.3 V."+        "description": "Driver 3 logic input (2 V min high at 3.3 V, 2.4 V min at 5 V, 0.8 V max low, accepts up to 5.5 V)."       },       {         "number": "23",         "name": "DIN2",         "type": "input",-        "description": "Driver 2 logic input; accepts 5.5 V logic with high level ≥ 2 V at VCC = 3.3 V."+        "description": "Driver 2 logic input (2 V min high at 3.3 V, 2.4 V min at 5 V, 0.8 V max low, accepts up to 5.5 V)."       },       {         "number": "24",         "name": "DIN1",         "type": "input",-        "description": "Driver 1 logic input; accepts 5.5 V logic with high level ≥ 2 V at VCC = 3.3 V."+        "description": "Driver 1 logic input (2 V min high at 3.3 V, 2.4 V min at 5 V, 0.8 V max low, accepts up to 5.5 V)."       },       {         "number": "25",         "name": "C1−",         "type": "passive",-        "description": "Negative terminal of charge-pump capacitor C1."+        "description": "Negative terminal of charge-pump capacitor C1 connected between C1+ and C1−."       },       {         "number": "26",         "name": "VCC",         "type": "power_in",-        "description": "Supply voltage input, 3 V to 5.5 V (abs max −0.3 V to 6 V), bypassed with 0.1 µF."+        "description": "Supply voltage input of 3 V to 3.6 V or 4.5 V to 5.5 V recommended (−0.3 V to 6 V absolute maximum), bypassed with 0.1 µF."       },       {         "number": "27",         "name": "V+",         "type": "power_out",-        "description": "Positive charge-pump output supply (about +5.5 V), abs max −0.3 V to 7 V, decoupled with capacitor C3."+        "description": "Charge-pump generated positive supply (about +5.5 V) with absolute maximum of 7 V, decoupled by capacitor C3."       },       {         "number": "28",         "name": "C1+",         "type": "passive",-        "description": "Positive terminal of charge-pump capacitor C1, connected to C1− through the external capacitor."+        "description": "Positive terminal of charge-pump capacitor C1 connected between C1+ and C1−."       }     ],     "provenance": {@@ -246,11 +245,12 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The DB pin numbers were taken from the page 1 top-view listing, which is extracted as a text sequenc; Charge-pump capacitor value descriptions for C1 and C2 reflect the VCC-dependent capacitor table on ; Pin descriptions for the DIN/ROUT/RIN/DOUT signals give only the limits stated in the datasheet; the"+          "extractor flagged: The pin-number-to-name mapping for the DB (SSOP-28) package was inferred from the ordered name list ; Charge-pump capacitor and V+/V− pin roles are inferred from the names; the datasheet's typical circu",+          "3/28 pins cited to the wrong page (name found elsewhere): ['8:RIN1@p7', '9:RIN2@p7', '11:RIN3@p7']"         ],         "pages_sent": 23,-        "cost_usd": 0.1127,-        "at": "2026-11-12T08:02:51"+        "cost_usd": 0.1172,+        "at": "2026-11-13T01:26:31"       },       "datasheet": {         "url": "https://www.ti.com/lit/ds/symlink/max3238e.pdf",@@ -287,7 +287,7 @@         "centre_offset_mm": 0.0,         "footprint_binding": "identity",         "sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",-        "checked": "2026-11-12",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -305,8 +305,8 @@         "zmin_mm": 0.0,         "centre_offset_mm": 0.0,         "footprint_binding": "identity",-        "sha256": "e25e8a6ee2ce148e5ed58066add1f2cc60eaa6fc2c50abe00589098852a7e9dc",-        "checked": "2026-11-12",+        "sha256": "635f12d6ab4b5ebe77fa43f46ea4175ec1744c004b994f904b304772b7f7c41d",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],
page.json+42−40
@@ -4,7 +4,7 @@   "slug": "max3238eidbr",   "title": "MAX3238EIDBR",   "brief": "Texas Instruments Pre-ordered Chips, SSOP-28-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",-  "version": "0.1.1",+  "version": "0.1.2",   "license": "CC-BY-SA-4.0",   "tags": [     "component",@@ -25,7 +25,7 @@       "symbol": "max3238eidbr.kicad_sym",       "footprint": "max3238eidbr.kicad_mod",       "model_3d": "max3238eidbr-hero.glb",-      "model_3d_plain": "max3238eidbr-etched.glb",+      "model_3d_plain": "max3238eidbr.glb",       "model_3d_step": "max3238eidbr-etched.step",       "model_3d_step_plain": "max3238eidbr.step",       "lbr": "max3238eidbr.lbr"@@ -36,7 +36,7 @@       "mouser": "595-MAX3238EIDBR"     },     "distributor_check": {-      "checked_at": "2026-11-12T08:03:13Z",+      "checked_at": "2026-11-13T01:26:46Z",       "source": "Component Ocean /api/assign-pns",       "digikey": {         "pn": "296-19817-2-ND",@@ -52,169 +52,169 @@         "number": "1",         "name": "C2+",         "type": "passive",-        "description": "Positive terminal of charge-pump capacitor C2, connected to C2− through the external capacitor (0.1 µF at VCC = 3.3 V ± 0.15 V)."+        "description": "Positive terminal of charge-pump capacitor C2 connected between C2+ and C2−."       },       {         "number": "2",         "name": "GND",         "type": "power_in",-        "description": "Ground; all supply voltages are specified with respect to network GND."+        "description": "Ground reference for all device voltages."       },       {         "number": "3",         "name": "C2−",         "type": "passive",-        "description": "Negative terminal of charge-pump capacitor C2."+        "description": "Negative terminal of charge-pump capacitor C2 connected between C2+ and C2−."       },       {         "number": "4",         "name": "V−",         "type": "power_out",-        "description": "Negative charge-pump output supply (about −5.5 V), abs max −0.3 V to −7 V, decoupled with capacitor C4."+        "description": "Charge-pump generated negative supply (about −5.5 V) with absolute maximum of −7 V, decoupled by capacitor C4."       },       {         "number": "5",         "name": "DOUT1",         "type": "output",-        "description": "RS-232 driver 1 output with ±15 kV HBM ESD protection, swings at least ±5 V into 3 kΩ."+        "description": "RS-232 driver 1 output with ±15 kV HBM ESD protection and output voltage range of ±13.2 V maximum."       },       {         "number": "6",         "name": "DOUT2",         "type": "output",-        "description": "RS-232 driver 2 output with ±15 kV HBM ESD protection, swings at least ±5 V into 3 kΩ."+        "description": "RS-232 driver 2 output with ±15 kV HBM ESD protection and output voltage range of ±13.2 V maximum."       },       {         "number": "7",         "name": "DOUT3",         "type": "output",-        "description": "RS-232 driver 3 output with ±15 kV HBM ESD protection, swings at least ±5 V into 3 kΩ."+        "description": "RS-232 driver 3 output with ±15 kV HBM ESD protection and output voltage range of ±13.2 V maximum."       },       {         "number": "8",         "name": "RIN1",         "type": "input",-        "description": "RS-232 receiver 1 input with ±15 kV HBM ESD protection, 5 kΩ nominal input resistance, ±25 V input range."+        "description": "RS-232 receiver 1 input with ±15 kV HBM ESD protection, ±25 V input range and 5 kΩ typical input resistance."       },       {         "number": "9",         "name": "RIN2",         "type": "input",-        "description": "RS-232 receiver 2 input with ±15 kV HBM ESD protection, 5 kΩ nominal input resistance, ±25 V input range."+        "description": "RS-232 receiver 2 input with ±15 kV HBM ESD protection, ±25 V input range and 5 kΩ typical input resistance."       },       {         "number": "10",         "name": "DOUT4",         "type": "output",-        "description": "RS-232 driver 4 output with ±15 kV HBM ESD protection, swings at least ±5 V into 3 kΩ."+        "description": "RS-232 driver 4 output with ±15 kV HBM ESD protection and output voltage range of ±13.2 V maximum."       },       {         "number": "11",         "name": "RIN3",         "type": "input",-        "description": "RS-232 receiver 3 input with ±15 kV HBM ESD protection, 5 kΩ nominal input resistance, ±25 V input range."+        "description": "RS-232 receiver 3 input with ±15 kV HBM ESD protection, ±25 V input range and 5 kΩ typical input resistance."       },       {         "number": "12",         "name": "DOUT5",         "type": "output",-        "description": "RS-232 driver 5 output with ±15 kV HBM ESD protection, swings at least ±5 V into 3 kΩ."+        "description": "RS-232 driver 5 output with ±15 kV HBM ESD protection and output voltage range of ±13.2 V maximum."       },       {         "number": "13",         "name": "FORCEON",         "type": "input",-        "description": "Logic control input; with FORCEOFF high, high disables auto-powerdown plus and low enables it (low level ≤ 0.8 V)."+        "description": "Logic input that, when high with FORCEOFF high, disables auto-powerdown plus; when low with FORCEOFF high, auto-powerdown plus is enabled (high-level input 2 V min at 3.3 V, 2.4 V min at 5 V)."       },       {         "number": "14",         "name": "FORCEOFF",         "type": "input",-        "description": "Logic control input; low powers off the drivers and charge pump (receivers except ROUT1B disabled), high enables operation (low level ≤ 0.8 V)."+        "description": "Logic input that powers off drivers and charge pump when low (driver outputs high-impedance, ROUT2/ROUT3 high-impedance) while ROUT1B stays active; maximum input voltage 6 V."       },       {         "number": "15",         "name": "INVALID",         "type": "output",-        "description": "Valid-signal output; high if any receiver input is above 2.7 V or below −2.7 V, low if all receiver inputs stay between −0.3 V and 0.3 V for more than 30 µs."+        "description": "Valid-signal output that is high if any receiver input is above 2.7 V or below −2.7 V, and low when all receiver inputs stay between −0.3 V and 0.3 V for more than 30 µs."       },       {         "number": "16",         "name": "ROUT1B",         "type": "output",-        "description": "Always-active noninverting receiver 1 output that remains active while the device is powered down."+        "description": "Always-active noninverting output of receiver 1 that remains active while the device is powered down, allowing ring-indicator use."       },       {         "number": "17",         "name": "DIN5",         "type": "input",-        "description": "Driver 5 logic input; accepts 5.5 V logic with high level ≥ 2 V at VCC = 3.3 V."+        "description": "Driver 5 logic input (2 V min high at 3.3 V, 2.4 V min at 5 V, 0.8 V max low, accepts up to 5.5 V)."       },       {         "number": "18",         "name": "ROUT3",         "type": "output",-        "description": "Receiver 3 logic output, high impedance when FORCEOFF is low."+        "description": "Receiver 3 logic output, high-impedance when FORCEOFF is low; VOH at least VCC − 0.6 V at −1 mA."       },       {         "number": "19",         "name": "DIN4",         "type": "input",-        "description": "Driver 4 logic input; accepts 5.5 V logic with high level ≥ 2 V at VCC = 3.3 V."+        "description": "Driver 4 logic input (2 V min high at 3.3 V, 2.4 V min at 5 V, 0.8 V max low, accepts up to 5.5 V)."       },       {         "number": "20",         "name": "ROUT2",         "type": "output",-        "description": "Receiver 2 logic output, high impedance when FORCEOFF is low."+        "description": "Receiver 2 logic output, high-impedance when FORCEOFF is low; VOH at least VCC − 0.6 V at −1 mA."       },       {         "number": "21",         "name": "ROUT1",         "type": "output",-        "description": "Receiver 1 logic output, high impedance when FORCEOFF is low."+        "description": "Receiver 1 logic output, high-impedance when FORCEOFF is low; VOH at least VCC − 0.6 V at −1 mA."       },       {         "number": "22",         "name": "DIN3",         "type": "input",-        "description": "Driver 3 logic input; accepts 5.5 V logic with high level ≥ 2 V at VCC = 3.3 V."+        "description": "Driver 3 logic input (2 V min high at 3.3 V, 2.4 V min at 5 V, 0.8 V max low, accepts up to 5.5 V)."       },       {         "number": "23",         "name": "DIN2",         "type": "input",-        "description": "Driver 2 logic input; accepts 5.5 V logic with high level ≥ 2 V at VCC = 3.3 V."+        "description": "Driver 2 logic input (2 V min high at 3.3 V, 2.4 V min at 5 V, 0.8 V max low, accepts up to 5.5 V)."       },       {         "number": "24",         "name": "DIN1",         "type": "input",-        "description": "Driver 1 logic input; accepts 5.5 V logic with high level ≥ 2 V at VCC = 3.3 V."+        "description": "Driver 1 logic input (2 V min high at 3.3 V, 2.4 V min at 5 V, 0.8 V max low, accepts up to 5.5 V)."       },       {         "number": "25",         "name": "C1−",         "type": "passive",-        "description": "Negative terminal of charge-pump capacitor C1."+        "description": "Negative terminal of charge-pump capacitor C1 connected between C1+ and C1−."       },       {         "number": "26",         "name": "VCC",         "type": "power_in",-        "description": "Supply voltage input, 3 V to 5.5 V (abs max −0.3 V to 6 V), bypassed with 0.1 µF."+        "description": "Supply voltage input of 3 V to 3.6 V or 4.5 V to 5.5 V recommended (−0.3 V to 6 V absolute maximum), bypassed with 0.1 µF."       },       {         "number": "27",         "name": "V+",         "type": "power_out",-        "description": "Positive charge-pump output supply (about +5.5 V), abs max −0.3 V to 7 V, decoupled with capacitor C3."+        "description": "Charge-pump generated positive supply (about +5.5 V) with absolute maximum of 7 V, decoupled by capacitor C3."       },       {         "number": "28",         "name": "C1+",         "type": "passive",-        "description": "Positive terminal of charge-pump capacitor C1, connected to C1− through the external capacitor."+        "description": "Positive terminal of charge-pump capacitor C1 connected between C1+ and C1−."       }     ],     "provenance": {@@ -228,11 +228,12 @@         "consensus": "agreed",         "guards": "pin_guards 0.1: passed",         "guard_notes": [-          "extractor flagged: The DB pin numbers were taken from the page 1 top-view listing, which is extracted as a text sequenc; Charge-pump capacitor value descriptions for C1 and C2 reflect the VCC-dependent capacitor table on ; Pin descriptions for the DIN/ROUT/RIN/DOUT signals give only the limits stated in the datasheet; the"+          "extractor flagged: The pin-number-to-name mapping for the DB (SSOP-28) package was inferred from the ordered name list ; Charge-pump capacitor and V+/V− pin roles are inferred from the names; the datasheet's typical circu",+          "3/28 pins cited to the wrong page (name found elsewhere): ['8:RIN1@p7', '9:RIN2@p7', '11:RIN3@p7']"         ],         "pages_sent": 23,-        "cost_usd": 0.1127,-        "at": "2026-11-12T08:02:51"+        "cost_usd": 0.1172,+        "at": "2026-11-13T01:26:31"       },       "datasheet": {         "url": "https://www.ti.com/lit/ds/symlink/max3238e.pdf",@@ -269,7 +270,7 @@         "centre_offset_mm": 0,         "footprint_binding": "identity",         "sha256": "7aa76979ae41da44bded1ed74115012868f2f3f5a757faf32bb9df4f92c1e313",-        "checked": "2026-11-12",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       },       {@@ -287,8 +288,8 @@         "zmin_mm": 0,         "centre_offset_mm": 0,         "footprint_binding": "identity",-        "sha256": "e25e8a6ee2ce148e5ed58066add1f2cc60eaa6fc2c50abe00589098852a7e9dc",-        "checked": "2026-11-12",+        "sha256": "635f12d6ab4b5ebe77fa43f46ea4175ec1744c004b994f904b304772b7f7c41d",+        "checked": "2026-11-13",         "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"       }     ],@@ -978,10 +979,11 @@     "viewers/symbol.html",     "viewers/footprint.html",     "max3238eidbr-hero.glb",-    "max3238eidbr-hero.overlay.json",-    "max3238eidbr-etched.glb"+    "max3238eidbr-hero.overlay.json"   ],   "visibility": {     "public": true-  }+  },+  "description": "Texas Instruments Pre-ordered Chips, SSOP-28-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+  "org": "adom" }\ No newline at end of file