← Commit history
Publish 0.1.1
5 files changed
+864−857
README.md+74−74@@ -8,34 +8,34 @@ MAX3238EIDBR from Texas Instruments, in a SSOP-28-208mil. Pinout and pin descrip | Pin | Name | Type | Function | |---|---|---|---|-| 1 | C2+ | passive | Positive terminal of charge-pump capacitor C2, connected between C2+ and C2−. |-| 2 | GND | power_in | Ground; all device voltages are specified with respect to GND. |-| 3 | C2− | passive | Negative terminal of charge-pump capacitor C2, connected between C2+ and C2−. |-| 4 | V− | power_out | Negative charge-pump output supply, rated −0.3 V to −7 V, decoupled with capacitor C4. |-| 5 | DOUT1 | output | RS-232 driver 1 output with ±15 kV HBM ESD protection, output swing ±5 V minimum into 3 kΩ. |-| 6 | DOUT2 | output | RS-232 driver 2 output with ±15 kV HBM ESD protection, output swing ±5 V minimum into 3 kΩ. |-| 7 | DOUT3 | output | RS-232 driver 3 output with ±15 kV HBM ESD protection, output swing ±5 V minimum into 3 kΩ. |-| 8 | RIN1 | input | RS-232 receiver 1 input with ±15 kV HBM ESD protection, ±25 V input range and 5 kΩ nominal input resistance. |-| 9 | RIN2 | input | RS-232 receiver 2 input with ±15 kV HBM ESD protection, ±25 V input range and 5 kΩ nominal input resistance. |-| 10 | DOUT4 | output | RS-232 driver 4 output with ±15 kV HBM ESD protection, output swing ±5 V minimum into 3 kΩ. |-| 11 | RIN3 | input | RS-232 receiver 3 input with ±15 kV HBM ESD protection, ±25 V input range and 5 kΩ nominal input resistance. |-| 12 | DOUT5 | output | RS-232 driver 5 output with ±15 kV HBM ESD protection, output swing ±5 V minimum into 3 kΩ. |-| 13 | FORCEON | input | Logic input that, with FORCEOFF high, disables auto-powerdown plus when high; low enables auto-powerdown plus; 5.5 V tolerant, VIL max 0.8 V. |-| 14 | FORCEOFF | input | Logic input that powers off the charge pump and drivers when low (ROUT1B stays active); high allows operation, VIL max 0.8 V. |-| 15 | INVALID | output | Valid-signal output, high if any receiver input is above 2.7 V or below −2.7 V, low when all receiver inputs stay between −0.3 V and 0.3 V for more than 30 µs. |-| 16 | ROUT1B | output | Always-active noninverting receiver 1 output that stays active when the device is powered down, allowing ring-indicator use. |-| 17 | DIN5 | input | Driver 5 logic input, VIH min 2 V at VCC = 3.3 V, accepts up to 5.5 V. |-| 18 | ROUT3 | output | Receiver 3 logic output, high-impedance when FORCEOFF is low. |-| 19 | DIN4 | input | Driver 4 logic input, VIH min 2 V at VCC = 3.3 V, accepts up to 5.5 V. |-| 20 | ROUT2 | output | Receiver 2 logic output, high-impedance when FORCEOFF is low. |-| 21 | ROUT1 | output | Receiver 1 logic output, high-impedance when FORCEOFF is low. |-| 22 | DIN3 | input | Driver 3 logic input, VIH min 2 V at VCC = 3.3 V, accepts up to 5.5 V. |-| 23 | DIN2 | input | Driver 2 logic input, VIH min 2 V at VCC = 3.3 V, accepts up to 5.5 V. |-| 24 | DIN1 | input | Driver 1 logic input, VIH min 2 V at VCC = 3.3 V, accepts up to 5.5 V. |-| 25 | C1− | passive | Negative terminal of charge-pump capacitor C1, connected between C1+ and C1−. |-| 26 | VCC | power_in | Supply voltage of 3 V to 5.5 V, absolute maximum 6 V, bypassed with 0.1 µF. |-| 27 | V+ | power_out | Positive charge-pump output supply, rated −0.3 V to 7 V, decoupled with capacitor C3 to VCC or GND. |-| 28 | C1+ | passive | Positive terminal of charge-pump capacitor C1, connected between C1+ and C1−. |+| 1 | C2+ | passive | Positive terminal of charge-pump capacitor C2, connected to C2− through the external capacitor (0.1 µF at VCC = 3.3 V ± 0.15 V). |+| 2 | GND | power_in | Ground; all supply voltages are specified with respect to network GND. |+| 3 | C2− | passive | Negative terminal of charge-pump capacitor C2. |+| 4 | V− | power_out | Negative charge-pump output supply (about −5.5 V), abs max −0.3 V to −7 V, decoupled with capacitor C4. |+| 5 | DOUT1 | output | RS-232 driver 1 output with ±15 kV HBM ESD protection, swings at least ±5 V into 3 kΩ. |+| 6 | DOUT2 | output | RS-232 driver 2 output with ±15 kV HBM ESD protection, swings at least ±5 V into 3 kΩ. |+| 7 | DOUT3 | output | RS-232 driver 3 output with ±15 kV HBM ESD protection, swings at least ±5 V into 3 kΩ. |+| 8 | RIN1 | input | RS-232 receiver 1 input with ±15 kV HBM ESD protection, 5 kΩ nominal input resistance, ±25 V input range. |+| 9 | RIN2 | input | RS-232 receiver 2 input with ±15 kV HBM ESD protection, 5 kΩ nominal input resistance, ±25 V input range. |+| 10 | DOUT4 | output | RS-232 driver 4 output with ±15 kV HBM ESD protection, swings at least ±5 V into 3 kΩ. |+| 11 | RIN3 | input | RS-232 receiver 3 input with ±15 kV HBM ESD protection, 5 kΩ nominal input resistance, ±25 V input range. |+| 12 | DOUT5 | output | RS-232 driver 5 output with ±15 kV HBM ESD protection, swings at least ±5 V into 3 kΩ. |+| 13 | FORCEON | input | Logic control input; with FORCEOFF high, high disables auto-powerdown plus and low enables it (low level ≤ 0.8 V). |+| 14 | FORCEOFF | input | Logic control input; low powers off the drivers and charge pump (receivers except ROUT1B disabled), high enables operation (low level ≤ 0.8 V). |+| 15 | INVALID | output | Valid-signal output; high if any receiver input is above 2.7 V or below −2.7 V, low if all receiver inputs stay between −0.3 V and 0.3 V for more than 30 µs. |+| 16 | ROUT1B | output | Always-active noninverting receiver 1 output that remains active while the device is powered down. |+| 17 | DIN5 | input | Driver 5 logic input; accepts 5.5 V logic with high level ≥ 2 V at VCC = 3.3 V. |+| 18 | ROUT3 | output | Receiver 3 logic output, high impedance when FORCEOFF is low. |+| 19 | DIN4 | input | Driver 4 logic input; accepts 5.5 V logic with high level ≥ 2 V at VCC = 3.3 V. |+| 20 | ROUT2 | output | Receiver 2 logic output, high impedance when FORCEOFF is low. |+| 21 | ROUT1 | output | Receiver 1 logic output, high impedance when FORCEOFF is low. |+| 22 | DIN3 | input | Driver 3 logic input; accepts 5.5 V logic with high level ≥ 2 V at VCC = 3.3 V. |+| 23 | DIN2 | input | Driver 2 logic input; accepts 5.5 V logic with high level ≥ 2 V at VCC = 3.3 V. |+| 24 | DIN1 | input | Driver 1 logic input; accepts 5.5 V logic with high level ≥ 2 V at VCC = 3.3 V. |+| 25 | C1− | passive | Negative terminal of charge-pump capacitor C1. |+| 26 | VCC | power_in | Supply voltage input, 3 V to 5.5 V (abs max −0.3 V to 6 V), bypassed with 0.1 µF. |+| 27 | V+ | power_out | Positive charge-pump output supply (about +5.5 V), abs max −0.3 V to 7 V, decoupled with capacitor C3. |+| 28 | C1+ | passive | Positive terminal of charge-pump capacitor C1, connected to C1− through the external capacitor. | ## Key specifications @@ -52,53 +52,53 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries | Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page | |---|---|---|---|---|---|---|---|-| Supply voltage VCC=3.3V | VCC | 3 | 3.3 | 3.6 | V | VCC = 3.3 V | 5 |-| Supply voltage VCC=5V | VCC | 4.5 | 5 | 5.5 | V | VCC = 5 V | 5 |-| Driver/control high-level input voltage 3.3V | VIH | 2 | | 5.5 | V | DIN, FORCEOFF, FORCEON; VCC = 3.3 V | 5 |-| Driver/control high-level input voltage 5V | VIH | 2.4 | | 5.5 | V | DIN, FORCEOFF, FORCEON; VCC = 5 V | 5 |-| Driver/control low-level input voltage | VIL | 0 | | 0.8 | V | DIN, FORCEOFF, FORCEON | 5 |-| Receiver input voltage | VI | -25 | | 25 | V | | 5 |-| Operating free-air temperature MAX3238EI | TA | -40 | | 85 | °C | MAX3238EI | 5 |-| Supply voltage range | VCC | -0.3 | | 6 | V | | 5 |-| Positive-output supply voltage range | V+ | -0.3 | | 7 | V | | 5 |-| Negative-output supply voltage range | V- | -7 | | 0.3 | V | | 5 |-| Supply voltage difference | V+, V- | | | 13 | V | | 5 |-| Input voltage range, driver | VI | -0.3 | | 6 | V | FORCEOFF, FORCEON | 5 |-| Input voltage range, receiver | VI | -25 | | 25 | V | | 5 |-| Output voltage range, driver | VO | -13.2 | | 13.2 | V | | 5 |+| Supply voltage range VCC | VCC | -0.3 | | 6 | V | | 5 |+| Positive-output supply voltage range V+ | V+ | -0.3 | | 7 | V | | 5 |+| Negative-output supply voltage range V- | V- | 0.3 | | -7 | V | | 5 |+| Supply voltage difference V+ - V- | V+ - V- | | | 13 | V | | 5 |+| Driver input voltage range (FORCEOFF, FORCEON) | VI | -0.3 | | 6 | V | Driver (FORCEOFF, FORCEON) | 5 |+| Receiver input voltage range | VI | -25 | | 25 | V | Receiver | 5 |+| Driver output voltage range | VO | -13.2 | | 13.2 | V | Driver | 5 |+| Package thermal impedance, DB package | θJA | | | 62 | °C/W | DB package | 5 | | Operating virtual junction temperature | TJ | | | 150 | °C | | 5 | | Storage temperature range | Tstg | -65 | | 150 | °C | | 5 |-| Package thermal impedance, DB package | θJA | | 62 | | °C/W | DB package | 5 |-| Input leakage current | II | | 0.01 | 1 | µA | FORCEOFF, FORCEON; typ ±0.01, max ±1 | 5 |-| Supply current, auto-powerdown plus disabled | ICC | | 0.5 | 2 | mA | No load, FORCEOFF and FORCEON at VCC; TA = 25°C | 5 |-| Supply current, powered off | ICC | | 1 | 10 | µA | No load, FORCEOFF at GND; TA = 25°C | 5 |-| Supply current, auto-powerdown plus enabled | ICC | | 1 | 10 | µA | No load, FORCEOFF at VCC, FORCEON at GND, All RIN are open or grounded; TA = 25°C | 5 |-| Driver high-level output voltage | VOH | 5 | 5.4 | | V | All DOUT at RL = 3 kΩ to GND | 6 |-| Driver low-level output voltage | VOL | | -5.4 | -5 | V | All DOUT at RL = 3 kΩ to GND | 6 |-| Driver high-level input current | IIH | | 0.01 | 1 | µA | VI = VCC; typ ±0.01, max ±1 | 6 |-| Driver low-level input current | IIL | | 0.01 | 1 | µA | VI at GND; typ ±0.01, max ±1 | 6 |-| Short-circuit output current 3.6V | IOS | | 35 | 60 | mA | VCC = 3.6 V, VO = 0 V; values ± | 6 |-| Short-circuit output current 5.5V | IOS | | 40 | 100 | mA | VCC = 5.5 V, VO = 0 V; values ± | 6 |-| Driver output leakage current 3V to 3.6V | IOZ | -25 | | 25 | µA | VO = ±12 V, VCC = 3 V to 3.6 V, FORCEOFF = GND | 6 |-| Driver output leakage current 4.5V to 5.5V | IOZ | -25 | | 25 | µA | VO = ±10 V, VCC = 4.5 V to 5.5 V, FORCEOFF = GND | 6 |-| Maximum data rate | | 250 | 400 | | kbit/s | CL = 1000 pF, RL = 3 kΩ, One DOUT switching | 6 |-| Driver pulse skew | tsk(p) | | | 100 | ns | CL = 150 pF to 2500 pF, RL = 3 kΩ to 7 kΩ | 6 |-| Slew rate, CL = 150 pF to 1000 pF | SR(tr) | 6 | | 30 | V/µs | VCC = 3.3 V, RL = 3 kΩ to 7 kΩ, CL = 150 pF to 1000 pF | 6 |-| Slew rate, CL = 150 pF to 2500 pF | SR(tr) | 4 | | 30 | V/µs | VCC = 3.3 V, RL = 3 kΩ to 7 kΩ, CL = 150 pF to 2500 pF | 6 |-| Receiver low-level output voltage | VOL | | | 0.4 | V | IOL = 1.6 mA | 7 |-| Positive-going input threshold voltage 3.3V | VIT+ | | 1.5 | 2.4 | V | VCC = 3.3 V | 7 |-| Positive-going input threshold voltage 5V | VIT+ | | 1.8 | 2.4 | V | VCC = 5 V | 7 |-| Negative-going input threshold voltage 3.3V | VIT- | 0.6 | 1.2 | | V | VCC = 3.3 V | 7 |-| Negative-going input threshold voltage 5V | VIT- | 0.8 | 1.5 | | V | VCC = 5 V | 7 |-| Input hysteresis | Vhys | | 0.3 | | V | VIT+, VIT- | 7 |-| Receiver output leakage current | IOZ | | 0.05 | 10 | µA | FORCEOFF = 0 V, except ROUT1B; typ ±0.05, max ±10 | 7 |-| Receiver input resistance | ri | 3 | 5 | 7 | kΩ | VI = ±3 V to ±25 V | 7 |-| INVALID high input threshold (positive) | VT+(valid) | | | 2.7 | V | FORCEON = GND, FORCEOFF = VCC | 8 |-| INVALID high input threshold (negative) | VT-(valid) | -2.7 | | | V | FORCEON = GND, FORCEOFF = VCC | 8 |-| INVALID low input threshold | VT(invalid) | -0.3 | | 0.3 | V | FORCEON = GND, FORCEOFF = VCC | 8 |+| Supply voltage, VCC = 3.3 V | VCC | 3 | 3.3 | 3.6 | V | VCC = 3.3 V | 5 |+| Supply voltage, VCC = 5 V | VCC | 4.5 | 5 | 5.5 | V | VCC = 5 V | 5 |+| Driver and control high-level input voltage (DIN, FORCEOFF) | VIH | 2 | | 5.5 | V | DIN, FORCEOFF, VCC = 3.3 V | 5 |+| Driver and control high-level input voltage (FORCEON) | VIH | 2.4 | | 5.5 | V | FORCEON, VCC = 5 V | 5 |+| Driver and control low-level input voltage | VIL | 0 | | 0.8 | V | DIN, FORCEOFF, FORCEON | 5 |+| Receiver input voltage | VI | -25 | | 25 | V | | 5 |+| Operating free-air temperature | TA | -40 | | 85 | °C | MAX3238EI | 5 |+| Input leakage current | II | -1 | 0.01 | 1 | µA | FORCEOFF, FORCEON | 5 |+| Supply current, auto-powerdown plus disabled | ICC | | 0.5 | 2 | mA | No load, FORCEOFF and FORCEON at VCC | 5 |+| Supply current, powered off | ICC | | 1 | 10 | µA | No load, FORCEOFF at GND | 5 |+| Supply current, auto-powerdown plus enabled | ICC | | 1 | 10 | µA | No load, FORCEOFF at VCC, FORCEON at GND, All RIN are open or grounded | 5 |+| High-level output voltage | VOH | 5 | | 5.4 | V | All DOUT at RL = 3 kΩ to GND | 6 |+| Low-level output voltage | VOL | -5.4 | | -5 | V | All DOUT at RL = 3 kΩ to GND | 6 |+| High-level input current | IIH | -1 | 0.01 | 1 | µA | VI = VCC | 6 |+| Low-level input current | IIL | -1 | 0.01 | 1 | µA | VI at GND | 6 |+| Short-circuit output current | IOS | -60 | 35 | 60 | mA | VCC = 3.6 V, VO = 0 V | 6 |+| Short-circuit output current | IOS | -100 | 40 | 100 | mA | VCC = 5.5 V, VO = 0 V | 6 |+| Output resistance | ro | 300 | | | Ω | VCC, V+, and V- = 0 V, VO = ±2 V | 6 |+| Output leakage current | IOZ | -25 | | 25 | µA | FORCEOFF = GND; VO = ±12 V, VCC = 3 V to 3.6 V | 6 |+| Maximum data rate | | 250 | | 400 | kbit/s | CL = 1000 pF, RL = 3 kΩ, One DOUT switching, See Figure 1 | 6 |+| Pulse skew | tsk(p) | | | 100 | ns | CL = 150 pF to 2500 pF, RL = 3 kΩ to 7 kΩ, See Figure 2 | 6 |+| Slew rate, transition region | SR(tr) | 6 | | 30 | V/µs | CL = 150 pF to 1000 pF | 6 |+| Slew rate, transition region | SR(tr) | 4 | | 30 | V/µs | VCC = 3.3 V, RL = 3 kΩ to 7 kΩ, CL = 150 pF to 2500 pF | 6 |+| Low-level output voltage | VOL | | | 0.4 | V | IOL = 1.6 mA | 7 |+| Positive-going input threshold voltage | VIT+ | 1.5 | | 2.4 | V | VCC = 3.3 V | 7 |+| Positive-going input threshold voltage | VIT+ | 1.8 | | 2.4 | V | VCC = 5 V | 7 |+| Negative-going input threshold voltage | VIT- | 0.6 | | 1.2 | V | VCC = 3.3 V | 7 |+| Negative-going input threshold voltage | VIT- | 0.8 | | 1.5 | V | VCC = 5 V | 7 |+| Input hysteresis (VIT+ - VIT-) | Vhys | | 0.3 | | V | | 7 |+| Output leakage current (except ROUT1B) | IOZ | -10 | 0.05 | 10 | µA | FORCEOFF = 0 V | 7 |+| Input resistance | ri | 3 | 5 | 7 | kΩ | VI = ±3 V to ±25 V | 7 |+| Receiver input threshold for INVALID high-level output voltage | VT+(valid) | 2.7 | | | V | FORCEON = GND, FORCEOFF = VCC | 8 |+| Receiver input threshold for INVALID high-level output voltage | VT-(valid) | | | -2.7 | V | FORCEON = GND, FORCEOFF = VCC | 8 |+| Receiver input threshold for INVALID low-level output voltage | VT(invalid) | -0.3 | | 0.3 | V | FORCEON = GND, FORCEOFF = VCC | 8 | | INVALID low-level output voltage | VOL | | | 0.4 | V | IOL = 1.6 mA, FORCEON = GND, FORCEOFF = VCC | 8 |-| INVALID propagation delay low- to high | tvalid | | 0.1 | | µs | | 8 |-| INVALID propagation delay high- to low | tinvalid | | 50 | | µs | | 8 |+| Propagation delay time, low- to high-level output (INVALID) | tvalid | | 0.1 | | µs | | 8 |+| Propagation delay time, high- to low-level output (INVALID) | tinvalid | | 50 | | µs | | 8 | | Supply enable time | ten | | 25 | | µs | | 8 | | Receiver or driver edge to auto-powerdown plus | tdis | 15 | 30 | 60 | s | | 8 | @@ -113,8 +113,8 @@ Limits as printed in the datasheet (page.json `metadata.characteristics` carries Data extracted from the manufacturer datasheet, not a distributor listing: -- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/max3238eidbr.pdf) (25 pp, sha256 `9274b6d0e769ad30`, retrieved 2026-11-12, tier: manufacturer)-- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.+- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/max3238e.pdf) (23 pp, sha256 `1d519ae7a9e53f86`, retrieved 2026-11-12, tier: manufacturer)+- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - **CAD:** KiCad official libraries (CC-BY-SA 4.0). [Datasheet PDF](docs/max3238eidbr-datasheet.pdf)
docs/max3238eidbr-datasheet.pdf⋯ 1 unchanged line ⋯
max3238eidbr-hero.overlay.json+703−698@@ -1,700 +1,705 @@ {- "spec": "adom-hero 1.4",- "mpn": "MAX3238EIDBR",- "kind": "component + footprint reference art",- "board_use": false,- "plane_z_mm": -0.02,- "units": "metre",- "upAxis": "Z",- "layers": {- "pad_outlines": {- "material": "Footprint pads - teal dashed outlines - 50 percent opacity",- "rgba": [- 0.0,- 0.902,- 0.863,- 0.5- ],- "pads": 28,- "span_mm": 8.9,- "dash_mm": 0.2225,- "gap_mm": 0.1335,- "pad_stroke_mm": 0.0534- },- "silkscreen": {- "material": "Silkscreen reference lines - 30 percent opacity",- "rgba": [- 0.92,- 0.96,- 1.0,- 0.3- ],- "footprint_items": 7,- "pin1": {- "source": "footprint silkscreen",- "pad": "1"- }- },- "signal_names": {- "material": "Signal names - 50 percent opacity",- "rgba": [- 0.92,- 0.96,- 1.0,- 0.5- ],- "font": "DejaVu Sans Mono",- "labels": 28,- "sides": "top + mirrored underside (single-sided)",- "fallback_to_pad_number": 0- }- },- "align": {- "ok": true,- "centre_offset_mm": 0.0,- "tolerance_mm": 0.712,- "orientation_flipped": false,- "contacts_bbox_mm": [- -3.9,- 3.9,- -4.906,- 4.906- ],- "pads_bbox_mm": [- -4.45,- 4.45,- -4.425,- 4.425- ],- "seating_z_mm": 0.0- },- "sources": {- "glb": "max3238eidbr-etched.glb",- "glb_sha256": "fc8a7375e14e8ef6fb40fff0c65b88dc6ac620c6f6214e9169d22679a67ca30e",- "footprint": "max3238eidbr.kicad_mod",- "footprint_sha256": "bbb0d0449b996c0ad096ca837fee38110e319360b863de5c7df6a964f6140d98",- "pins": "page.json component.pins",- "pins_sha256": "ac386527bf038dc55a7f6dcd0684d02e52d7d63526efcbe2c57bad44de15914c"- },- "generator": "adom-wiki 1.8.22 (component_hero)",- "labels": [- {- "pad": "1",- "text": "C2+",- "x": -4.55,- "y": -4.225,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "2",- "text": "GND",- "x": -4.55,- "y": -3.575,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "3",- "text": "C2−",- "x": -4.55,- "y": -2.925,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "4",- "text": "V−",- "x": -4.55,- "y": -2.275,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "5",- "text": "DOUT1",- "x": -4.55,- "y": -1.625,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "6",- "text": "DOUT2",- "x": -4.55,- "y": -0.975,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "7",- "text": "DOUT3",- "x": -4.55,- "y": -0.325,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "8",- "text": "RIN1",- "x": -4.55,- "y": 0.325,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "9",- "text": "RIN2",- "x": -4.55,- "y": 0.975,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "10",- "text": "DOUT4",- "x": -4.55,- "y": 1.625,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "11",- "text": "RIN3",- "x": -4.55,- "y": 2.275,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "12",- "text": "DOUT5",- "x": -4.55,- "y": 2.925,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "13",- "text": "FORCEON",- "x": -4.55,- "y": 3.575,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "14",- "text": "FORCEOFF",- "x": -4.55,- "y": 4.225,- "align": "right",- "vertical": false,- "h": 0.325- },- {- "pad": "15",- "text": "INVALID",- "x": 4.55,- "y": 4.225,- "align": "left",- "vertical": false,- "h": 0.325- },- {- "pad": "16",- "text": "ROUT1B",- "x": 4.55,- "y": 3.575,- "align": "left",- "vertical": false,- "h": 0.325- },- {- "pad": "17",- "text": "DIN5",- "x": 4.55,- "y": 2.925,- "align": "left",- "vertical": false,- "h": 0.325- },- {- "pad": "18",- "text": "ROUT3",- "x": 4.55,- "y": 2.275,- "align": "left",- "vertical": false,- "h": 0.325- },- {- "pad": "19",- "text": "DIN4",- "x": 4.55,- "y": 1.625,- "align": "left",- "vertical": false,- "h": 0.325- },- {- "pad": "20",- "text": "ROUT2",- "x": 4.55,- "y": 0.975,- "align": "left",- "vertical": false,- "h": 0.325- },- {- "pad": "21",- "text": "ROUT1",- "x": 4.55,- "y": 0.325,- "align": "left",- "vertical": false,- "h": 0.325- },- {- "pad": "22",- "text": "DIN3",- "x": 4.55,- "y": -0.325,- "align": "left",- "vertical": false,- "h": 0.325- },- {- "pad": "23",- "text": "DIN2",- "x": 4.55,- "y": -0.975,- "align": "left",- "vertical": false,- "h": 0.325- },- {- "pad": "24",- "text": "DIN1",- "x": 4.55,- "y": -1.625,- "align": "left",- "vertical": false,- "h": 0.325- },- {- "pad": "25",- "text": "C1−",- "x": 4.55,- "y": -2.275,- "align": "left",- "vertical": false,- "h": 0.325- },- {- "pad": "26",- "text": "VCC",- "x": 4.55,- "y": -2.925,- "align": "left",- "vertical": false,- "h": 0.325- },- {- "pad": "27",- "text": "V+",- "x": 4.55,- "y": -3.575,- "align": "left",- "vertical": false,- "h": 0.325- },- {- "pad": "28",- "text": "C1+",- "x": 4.55,- "y": -4.225,- "align": "left",- "vertical": false,- "h": 0.325- }+ "spec": "adom-hero 1.4",+ "mpn": "MAX3238EIDBR",+ "kind": "component + footprint reference art",+ "board_use": false,+ "plane_z_mm": -0.02,+ "units": "metre",+ "upAxis": "Z",+ "layers": {+ "pad_outlines": {+ "material": "Footprint pads - teal dashed outlines - 50 percent opacity",+ "rgba": [+ 0.0,+ 0.902,+ 0.863,+ 0.5+ ],+ "pads": 28,+ "span_mm": 8.9,+ "dash_mm": 0.2225,+ "gap_mm": 0.1335,+ "pad_stroke_mm": 0.0534+ },+ "silkscreen": {+ "material": "Silkscreen reference lines - 30 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.3+ ],+ "footprint_items": 7,+ "pin1": {+ "source": "footprint silkscreen",+ "pad": "1"+ }+ },+ "signal_names": {+ "material": "Signal names - 50 percent opacity",+ "rgba": [+ 0.92,+ 0.96,+ 1.0,+ 0.5+ ],+ "font": "DejaVu Sans Mono",+ "labels": 28,+ "sides": "top + mirrored underside (single-sided)",+ "omitted": null,+ "fallback_to_pad_number": 0+ }+ },+ "align": {+ "ok": true,+ "board_underside": true,+ "electrical_pads_without_contact": [],+ "mounting_pads_left_out": [],+ "centre_offset_mm": 0.0,+ "over_pads": true,+ "tolerance_mm": 0.712,+ "orientation_flipped": false,+ "contacts_bbox_mm": [+ -3.9,+ 3.9,+ -4.906,+ 4.906 ],- "pads": [- {- "number": "1",- "shape": "roundrect",- "center_mm": [- -3.5,- -4.225- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "2",- "shape": "roundrect",- "center_mm": [- -3.5,- -3.575- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "3",- "shape": "roundrect",- "center_mm": [- -3.5,- -2.925- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "4",- "shape": "roundrect",- "center_mm": [- -3.5,- -2.275- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "5",- "shape": "roundrect",- "center_mm": [- -3.5,- -1.625- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "6",- "shape": "roundrect",- "center_mm": [- -3.5,- -0.975- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "7",- "shape": "roundrect",- "center_mm": [- -3.5,- -0.325- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "8",- "shape": "roundrect",- "center_mm": [- -3.5,- 0.325- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "9",- "shape": "roundrect",- "center_mm": [- -3.5,- 0.975- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "10",- "shape": "roundrect",- "center_mm": [- -3.5,- 1.625- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "11",- "shape": "roundrect",- "center_mm": [- -3.5,- 2.275- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "12",- "shape": "roundrect",- "center_mm": [- -3.5,- 2.925- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "13",- "shape": "roundrect",- "center_mm": [- -3.5,- 3.575- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "14",- "shape": "roundrect",- "center_mm": [- -3.5,- 4.225- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "15",- "shape": "roundrect",- "center_mm": [- 3.5,- 4.225- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "16",- "shape": "roundrect",- "center_mm": [- 3.5,- 3.575- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "17",- "shape": "roundrect",- "center_mm": [- 3.5,- 2.925- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "18",- "shape": "roundrect",- "center_mm": [- 3.5,- 2.275- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "19",- "shape": "roundrect",- "center_mm": [- 3.5,- 1.625- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "20",- "shape": "roundrect",- "center_mm": [- 3.5,- 0.975- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "21",- "shape": "roundrect",- "center_mm": [- 3.5,- 0.325- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "22",- "shape": "roundrect",- "center_mm": [- 3.5,- -0.325- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "23",- "shape": "roundrect",- "center_mm": [- 3.5,- -0.975- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "24",- "shape": "roundrect",- "center_mm": [- 3.5,- -1.625- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "25",- "shape": "roundrect",- "center_mm": [- 3.5,- -2.275- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "26",- "shape": "roundrect",- "center_mm": [- 3.5,- -2.925- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "27",- "shape": "roundrect",- "center_mm": [- 3.5,- -3.575- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- },- {- "number": "28",- "shape": "roundrect",- "center_mm": [- 3.5,- -4.225- ],- "size_mm": [- 1.9,- 0.4- ],- "rot": 0.0- }- ]-}+ "pads_bbox_mm": [+ -4.45,+ 4.45,+ -4.425,+ 4.425+ ],+ "seating_z_mm": 0.0+ },+ "sources": {+ "glb": "max3238eidbr-etched.glb",+ "glb_sha256": "fc8a7375e14e8ef6fb40fff0c65b88dc6ac620c6f6214e9169d22679a67ca30e",+ "footprint": "max3238eidbr.kicad_mod",+ "footprint_sha256": "bbb0d0449b996c0ad096ca837fee38110e319360b863de5c7df6a964f6140d98",+ "pins": "page.json component.pins",+ "pins_sha256": "ac386527bf038dc55a7f6dcd0684d02e52d7d63526efcbe2c57bad44de15914c"+ },+ "generator": "factory/hero_glb.py",+ "labels": [+ {+ "pad": "1",+ "text": "C2+",+ "x": -4.55,+ "y": -4.225,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "2",+ "text": "GND",+ "x": -4.55,+ "y": -3.575,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "3",+ "text": "C2\u2212",+ "x": -4.55,+ "y": -2.925,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "4",+ "text": "V\u2212",+ "x": -4.55,+ "y": -2.275,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "5",+ "text": "DOUT1",+ "x": -4.55,+ "y": -1.625,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "6",+ "text": "DOUT2",+ "x": -4.55,+ "y": -0.975,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "7",+ "text": "DOUT3",+ "x": -4.55,+ "y": -0.325,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "8",+ "text": "RIN1",+ "x": -4.55,+ "y": 0.325,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "9",+ "text": "RIN2",+ "x": -4.55,+ "y": 0.975,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "10",+ "text": "DOUT4",+ "x": -4.55,+ "y": 1.625,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "11",+ "text": "RIN3",+ "x": -4.55,+ "y": 2.275,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "12",+ "text": "DOUT5",+ "x": -4.55,+ "y": 2.925,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "13",+ "text": "FORCEON",+ "x": -4.55,+ "y": 3.575,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "14",+ "text": "FORCEOFF",+ "x": -4.55,+ "y": 4.225,+ "align": "right",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "15",+ "text": "INVALID",+ "x": 4.55,+ "y": 4.225,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "16",+ "text": "ROUT1B",+ "x": 4.55,+ "y": 3.575,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "17",+ "text": "DIN5",+ "x": 4.55,+ "y": 2.925,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "18",+ "text": "ROUT3",+ "x": 4.55,+ "y": 2.275,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "19",+ "text": "DIN4",+ "x": 4.55,+ "y": 1.625,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "20",+ "text": "ROUT2",+ "x": 4.55,+ "y": 0.975,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "21",+ "text": "ROUT1",+ "x": 4.55,+ "y": 0.325,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "22",+ "text": "DIN3",+ "x": 4.55,+ "y": -0.325,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "23",+ "text": "DIN2",+ "x": 4.55,+ "y": -0.975,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "24",+ "text": "DIN1",+ "x": 4.55,+ "y": -1.625,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "25",+ "text": "C1\u2212",+ "x": 4.55,+ "y": -2.275,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "26",+ "text": "VCC",+ "x": 4.55,+ "y": -2.925,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "27",+ "text": "V+",+ "x": 4.55,+ "y": -3.575,+ "align": "left",+ "vertical": false,+ "h": 0.325+ },+ {+ "pad": "28",+ "text": "C1+",+ "x": 4.55,+ "y": -4.225,+ "align": "left",+ "vertical": false,+ "h": 0.325+ }+ ],+ "pads": [+ {+ "number": "1",+ "shape": "roundrect",+ "center_mm": [+ -3.5,+ -4.225+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "2",+ "shape": "roundrect",+ "center_mm": [+ -3.5,+ -3.575+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "3",+ "shape": "roundrect",+ "center_mm": [+ -3.5,+ -2.925+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "4",+ "shape": "roundrect",+ "center_mm": [+ -3.5,+ -2.275+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "5",+ "shape": "roundrect",+ "center_mm": [+ -3.5,+ -1.625+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "6",+ "shape": "roundrect",+ "center_mm": [+ -3.5,+ -0.975+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "7",+ "shape": "roundrect",+ "center_mm": [+ -3.5,+ -0.325+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "8",+ "shape": "roundrect",+ "center_mm": [+ -3.5,+ 0.325+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "9",+ "shape": "roundrect",+ "center_mm": [+ -3.5,+ 0.975+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "10",+ "shape": "roundrect",+ "center_mm": [+ -3.5,+ 1.625+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "11",+ "shape": "roundrect",+ "center_mm": [+ -3.5,+ 2.275+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "12",+ "shape": "roundrect",+ "center_mm": [+ -3.5,+ 2.925+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "13",+ "shape": "roundrect",+ "center_mm": [+ -3.5,+ 3.575+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "14",+ "shape": "roundrect",+ "center_mm": [+ -3.5,+ 4.225+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "15",+ "shape": "roundrect",+ "center_mm": [+ 3.5,+ 4.225+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "16",+ "shape": "roundrect",+ "center_mm": [+ 3.5,+ 3.575+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "17",+ "shape": "roundrect",+ "center_mm": [+ 3.5,+ 2.925+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "18",+ "shape": "roundrect",+ "center_mm": [+ 3.5,+ 2.275+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "19",+ "shape": "roundrect",+ "center_mm": [+ 3.5,+ 1.625+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "20",+ "shape": "roundrect",+ "center_mm": [+ 3.5,+ 0.975+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "21",+ "shape": "roundrect",+ "center_mm": [+ 3.5,+ 0.325+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "22",+ "shape": "roundrect",+ "center_mm": [+ 3.5,+ -0.325+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "23",+ "shape": "roundrect",+ "center_mm": [+ 3.5,+ -0.975+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "24",+ "shape": "roundrect",+ "center_mm": [+ 3.5,+ -1.625+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "25",+ "shape": "roundrect",+ "center_mm": [+ 3.5,+ -2.275+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "26",+ "shape": "roundrect",+ "center_mm": [+ 3.5,+ -2.925+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "27",+ "shape": "roundrect",+ "center_mm": [+ 3.5,+ -3.575+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ },+ {+ "number": "28",+ "shape": "roundrect",+ "center_mm": [+ 3.5,+ -4.225+ ],+ "size_mm": [+ 1.9,+ 0.4+ ],+ "rot": 0.0+ }+ ]+}
package.json+42−42@@ -1,6 +1,6 @@ { "slug": "max3238eidbr",- "version": "0.1.0",+ "version": "0.1.1", "type": "component", "description": "Texas Instruments Pre-ordered Chips, SSOP-28-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.", "tags": [@@ -38,7 +38,7 @@ "pin_count": 28, "category": "Interface ICs", "subcategory": "Pre-ordered Chips",- "datasheet": "https://www.ti.com/lit/ds/symlink/max3238eidbr.pdf",+ "datasheet": "https://www.ti.com/lit/ds/symlink/max3238e.pdf", "parts": { "symbol": "max3238eidbr.kicad_sym", "footprint": "max3238eidbr.kicad_mod",@@ -54,7 +54,7 @@ "mouser": "595-MAX3238EIDBR" }, "distributor_check": {- "checked_at": "2026-11-12T04:59:20Z",+ "checked_at": "2026-11-12T08:03:13Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "296-19817-2-ND",@@ -70,169 +70,169 @@ "number": "1", "name": "C2+", "type": "passive",- "description": "Positive terminal of charge-pump capacitor C2, connected between C2+ and C2−."+ "description": "Positive terminal of charge-pump capacitor C2, connected to C2− through the external capacitor (0.1 µF at VCC = 3.3 V ± 0.15 V)." }, { "number": "2", "name": "GND", "type": "power_in",- "description": "Ground; all device voltages are specified with respect to GND."+ "description": "Ground; all supply voltages are specified with respect to network GND." }, { "number": "3", "name": "C2−", "type": "passive",- "description": "Negative terminal of charge-pump capacitor C2, connected between C2+ and C2−."+ "description": "Negative terminal of charge-pump capacitor C2." }, { "number": "4", "name": "V−", "type": "power_out",- "description": "Negative charge-pump output supply, rated −0.3 V to −7 V, decoupled with capacitor C4."+ "description": "Negative charge-pump output supply (about −5.5 V), abs max −0.3 V to −7 V, decoupled with capacitor C4." }, { "number": "5", "name": "DOUT1", "type": "output",- "description": "RS-232 driver 1 output with ±15 kV HBM ESD protection, output swing ±5 V minimum into 3 kΩ."+ "description": "RS-232 driver 1 output with ±15 kV HBM ESD protection, swings at least ±5 V into 3 kΩ." }, { "number": "6", "name": "DOUT2", "type": "output",- "description": "RS-232 driver 2 output with ±15 kV HBM ESD protection, output swing ±5 V minimum into 3 kΩ."+ "description": "RS-232 driver 2 output with ±15 kV HBM ESD protection, swings at least ±5 V into 3 kΩ." }, { "number": "7", "name": "DOUT3", "type": "output",- "description": "RS-232 driver 3 output with ±15 kV HBM ESD protection, output swing ±5 V minimum into 3 kΩ."+ "description": "RS-232 driver 3 output with ±15 kV HBM ESD protection, swings at least ±5 V into 3 kΩ." }, { "number": "8", "name": "RIN1", "type": "input",- "description": "RS-232 receiver 1 input with ±15 kV HBM ESD protection, ±25 V input range and 5 kΩ nominal input resistance."+ "description": "RS-232 receiver 1 input with ±15 kV HBM ESD protection, 5 kΩ nominal input resistance, ±25 V input range." }, { "number": "9", "name": "RIN2", "type": "input",- "description": "RS-232 receiver 2 input with ±15 kV HBM ESD protection, ±25 V input range and 5 kΩ nominal input resistance."+ "description": "RS-232 receiver 2 input with ±15 kV HBM ESD protection, 5 kΩ nominal input resistance, ±25 V input range." }, { "number": "10", "name": "DOUT4", "type": "output",- "description": "RS-232 driver 4 output with ±15 kV HBM ESD protection, output swing ±5 V minimum into 3 kΩ."+ "description": "RS-232 driver 4 output with ±15 kV HBM ESD protection, swings at least ±5 V into 3 kΩ." }, { "number": "11", "name": "RIN3", "type": "input",- "description": "RS-232 receiver 3 input with ±15 kV HBM ESD protection, ±25 V input range and 5 kΩ nominal input resistance."+ "description": "RS-232 receiver 3 input with ±15 kV HBM ESD protection, 5 kΩ nominal input resistance, ±25 V input range." }, { "number": "12", "name": "DOUT5", "type": "output",- "description": "RS-232 driver 5 output with ±15 kV HBM ESD protection, output swing ±5 V minimum into 3 kΩ."+ "description": "RS-232 driver 5 output with ±15 kV HBM ESD protection, swings at least ±5 V into 3 kΩ." }, { "number": "13", "name": "FORCEON", "type": "input",- "description": "Logic input that, with FORCEOFF high, disables auto-powerdown plus when high; low enables auto-powerdown plus; 5.5 V tolerant, VIL max 0.8 V."+ "description": "Logic control input; with FORCEOFF high, high disables auto-powerdown plus and low enables it (low level ≤ 0.8 V)." }, { "number": "14", "name": "FORCEOFF", "type": "input",- "description": "Logic input that powers off the charge pump and drivers when low (ROUT1B stays active); high allows operation, VIL max 0.8 V."+ "description": "Logic control input; low powers off the drivers and charge pump (receivers except ROUT1B disabled), high enables operation (low level ≤ 0.8 V)." }, { "number": "15", "name": "INVALID", "type": "output",- "description": "Valid-signal output, high if any receiver input is above 2.7 V or below −2.7 V, low when all receiver inputs stay between −0.3 V and 0.3 V for more than 30 µs."+ "description": "Valid-signal output; high if any receiver input is above 2.7 V or below −2.7 V, low if all receiver inputs stay between −0.3 V and 0.3 V for more than 30 µs." }, { "number": "16", "name": "ROUT1B", "type": "output",- "description": "Always-active noninverting receiver 1 output that stays active when the device is powered down, allowing ring-indicator use."+ "description": "Always-active noninverting receiver 1 output that remains active while the device is powered down." }, { "number": "17", "name": "DIN5", "type": "input",- "description": "Driver 5 logic input, VIH min 2 V at VCC = 3.3 V, accepts up to 5.5 V."+ "description": "Driver 5 logic input; accepts 5.5 V logic with high level ≥ 2 V at VCC = 3.3 V." }, { "number": "18", "name": "ROUT3", "type": "output",- "description": "Receiver 3 logic output, high-impedance when FORCEOFF is low."+ "description": "Receiver 3 logic output, high impedance when FORCEOFF is low." }, { "number": "19", "name": "DIN4", "type": "input",- "description": "Driver 4 logic input, VIH min 2 V at VCC = 3.3 V, accepts up to 5.5 V."+ "description": "Driver 4 logic input; accepts 5.5 V logic with high level ≥ 2 V at VCC = 3.3 V." }, { "number": "20", "name": "ROUT2", "type": "output",- "description": "Receiver 2 logic output, high-impedance when FORCEOFF is low."+ "description": "Receiver 2 logic output, high impedance when FORCEOFF is low." }, { "number": "21", "name": "ROUT1", "type": "output",- "description": "Receiver 1 logic output, high-impedance when FORCEOFF is low."+ "description": "Receiver 1 logic output, high impedance when FORCEOFF is low." }, { "number": "22", "name": "DIN3", "type": "input",- "description": "Driver 3 logic input, VIH min 2 V at VCC = 3.3 V, accepts up to 5.5 V."+ "description": "Driver 3 logic input; accepts 5.5 V logic with high level ≥ 2 V at VCC = 3.3 V." }, { "number": "23", "name": "DIN2", "type": "input",- "description": "Driver 2 logic input, VIH min 2 V at VCC = 3.3 V, accepts up to 5.5 V."+ "description": "Driver 2 logic input; accepts 5.5 V logic with high level ≥ 2 V at VCC = 3.3 V." }, { "number": "24", "name": "DIN1", "type": "input",- "description": "Driver 1 logic input, VIH min 2 V at VCC = 3.3 V, accepts up to 5.5 V."+ "description": "Driver 1 logic input; accepts 5.5 V logic with high level ≥ 2 V at VCC = 3.3 V." }, { "number": "25", "name": "C1−", "type": "passive",- "description": "Negative terminal of charge-pump capacitor C1, connected between C1+ and C1−."+ "description": "Negative terminal of charge-pump capacitor C1." }, { "number": "26", "name": "VCC", "type": "power_in",- "description": "Supply voltage of 3 V to 5.5 V, absolute maximum 6 V, bypassed with 0.1 µF."+ "description": "Supply voltage input, 3 V to 5.5 V (abs max −0.3 V to 6 V), bypassed with 0.1 µF." }, { "number": "27", "name": "V+", "type": "power_out",- "description": "Positive charge-pump output supply, rated −0.3 V to 7 V, decoupled with capacitor C3 to VCC or GND."+ "description": "Positive charge-pump output supply (about +5.5 V), abs max −0.3 V to 7 V, decoupled with capacitor C3." }, { "number": "28", "name": "C1+", "type": "passive",- "description": "Positive terminal of charge-pump capacitor C1, connected between C1+ and C1−."+ "description": "Positive terminal of charge-pump capacitor C1, connected to C1− through the external capacitor." } ], "provenance": {@@ -240,22 +240,22 @@ "factory_chain": { "factory": "2.0.0", "extractor": "extract_pins 0.3",- "primary_model": "claude-sonnet-5-5",+ "primary_model": "claude-haiku-5-5", "primary_mode": "text", "consensus_model": "claude-sonnet-5-5", "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: Pins 13, 14, 17-24 descriptions combine pin-name function tables with electrical limits from other p"+ "extractor flagged: The DB pin numbers were taken from the page 1 top-view listing, which is extracted as a text sequenc; Charge-pump capacitor value descriptions for C1 and C2 reflect the VCC-dependent capacitor table on ; Pin descriptions for the DIN/ROUT/RIN/DOUT signals give only the limits stated in the datasheet; the" ],- "pages_sent": 25,- "cost_usd": 0.1936,- "at": "2026-11-12T04:59:07"+ "pages_sent": 23,+ "cost_usd": 0.1127,+ "at": "2026-11-12T08:02:51" }, "datasheet": {- "url": "https://www.ti.com/lit/ds/symlink/max3238eidbr.pdf",- "pages": 25,- "sha256": "9274b6d0e769ad30",+ "url": "https://www.ti.com/lit/ds/symlink/max3238e.pdf",+ "pages": 23,+ "sha256": "1d519ae7a9e53f86", "source_tier": "mfr" }, "cad": "KiCad official (CC-BY-SA 4.0)",@@ -305,14 +305,14 @@ "zmin_mm": 0.0, "centre_offset_mm": 0.0, "footprint_binding": "identity",- "sha256": "8728f68d73c6f3f58df864dad7ef72498bd5f1d0019b0024411282b3d91bea31",+ "sha256": "e25e8a6ee2ce148e5ed58066add1f2cc60eaa6fc2c50abe00589098852a7e9dc", "checked": "2026-11-12", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ], "package_dims": { "package_code": "DB0028A",- "source_page": 18,+ "source_page": 20, "D": { "nom_mm": 10.2, "range_mm": [@@ -328,7 +328,7 @@ ] }, "E": {- "nom_mm": 8.2,+ "nom_mm": 7.8, "range_mm": [ 7.4, 8.2
page.json+45−43@@ -4,7 +4,7 @@ "slug": "max3238eidbr", "title": "MAX3238EIDBR", "brief": "Texas Instruments Pre-ordered Chips, SSOP-28-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",- "version": "0.1.0",+ "version": "0.1.1", "license": "CC-BY-SA-4.0", "tags": [ "component",@@ -20,7 +20,7 @@ "pin_count": 28, "category": "Interface ICs", "subcategory": "Pre-ordered Chips",- "datasheet": "https://www.ti.com/lit/ds/symlink/max3238eidbr.pdf",+ "datasheet": "https://www.ti.com/lit/ds/symlink/max3238e.pdf", "parts": { "symbol": "max3238eidbr.kicad_sym", "footprint": "max3238eidbr.kicad_mod",@@ -36,7 +36,7 @@ "mouser": "595-MAX3238EIDBR" }, "distributor_check": {- "checked_at": "2026-11-12T04:59:20Z",+ "checked_at": "2026-11-12T08:03:13Z", "source": "Component Ocean /api/assign-pns", "digikey": { "pn": "296-19817-2-ND",@@ -52,169 +52,169 @@ "number": "1", "name": "C2+", "type": "passive",- "description": "Positive terminal of charge-pump capacitor C2, connected between C2+ and C2−."+ "description": "Positive terminal of charge-pump capacitor C2, connected to C2− through the external capacitor (0.1 µF at VCC = 3.3 V ± 0.15 V)." }, { "number": "2", "name": "GND", "type": "power_in",- "description": "Ground; all device voltages are specified with respect to GND."+ "description": "Ground; all supply voltages are specified with respect to network GND." }, { "number": "3", "name": "C2−", "type": "passive",- "description": "Negative terminal of charge-pump capacitor C2, connected between C2+ and C2−."+ "description": "Negative terminal of charge-pump capacitor C2." }, { "number": "4", "name": "V−", "type": "power_out",- "description": "Negative charge-pump output supply, rated −0.3 V to −7 V, decoupled with capacitor C4."+ "description": "Negative charge-pump output supply (about −5.5 V), abs max −0.3 V to −7 V, decoupled with capacitor C4." }, { "number": "5", "name": "DOUT1", "type": "output",- "description": "RS-232 driver 1 output with ±15 kV HBM ESD protection, output swing ±5 V minimum into 3 kΩ."+ "description": "RS-232 driver 1 output with ±15 kV HBM ESD protection, swings at least ±5 V into 3 kΩ." }, { "number": "6", "name": "DOUT2", "type": "output",- "description": "RS-232 driver 2 output with ±15 kV HBM ESD protection, output swing ±5 V minimum into 3 kΩ."+ "description": "RS-232 driver 2 output with ±15 kV HBM ESD protection, swings at least ±5 V into 3 kΩ." }, { "number": "7", "name": "DOUT3", "type": "output",- "description": "RS-232 driver 3 output with ±15 kV HBM ESD protection, output swing ±5 V minimum into 3 kΩ."+ "description": "RS-232 driver 3 output with ±15 kV HBM ESD protection, swings at least ±5 V into 3 kΩ." }, { "number": "8", "name": "RIN1", "type": "input",- "description": "RS-232 receiver 1 input with ±15 kV HBM ESD protection, ±25 V input range and 5 kΩ nominal input resistance."+ "description": "RS-232 receiver 1 input with ±15 kV HBM ESD protection, 5 kΩ nominal input resistance, ±25 V input range." }, { "number": "9", "name": "RIN2", "type": "input",- "description": "RS-232 receiver 2 input with ±15 kV HBM ESD protection, ±25 V input range and 5 kΩ nominal input resistance."+ "description": "RS-232 receiver 2 input with ±15 kV HBM ESD protection, 5 kΩ nominal input resistance, ±25 V input range." }, { "number": "10", "name": "DOUT4", "type": "output",- "description": "RS-232 driver 4 output with ±15 kV HBM ESD protection, output swing ±5 V minimum into 3 kΩ."+ "description": "RS-232 driver 4 output with ±15 kV HBM ESD protection, swings at least ±5 V into 3 kΩ." }, { "number": "11", "name": "RIN3", "type": "input",- "description": "RS-232 receiver 3 input with ±15 kV HBM ESD protection, ±25 V input range and 5 kΩ nominal input resistance."+ "description": "RS-232 receiver 3 input with ±15 kV HBM ESD protection, 5 kΩ nominal input resistance, ±25 V input range." }, { "number": "12", "name": "DOUT5", "type": "output",- "description": "RS-232 driver 5 output with ±15 kV HBM ESD protection, output swing ±5 V minimum into 3 kΩ."+ "description": "RS-232 driver 5 output with ±15 kV HBM ESD protection, swings at least ±5 V into 3 kΩ." }, { "number": "13", "name": "FORCEON", "type": "input",- "description": "Logic input that, with FORCEOFF high, disables auto-powerdown plus when high; low enables auto-powerdown plus; 5.5 V tolerant, VIL max 0.8 V."+ "description": "Logic control input; with FORCEOFF high, high disables auto-powerdown plus and low enables it (low level ≤ 0.8 V)." }, { "number": "14", "name": "FORCEOFF", "type": "input",- "description": "Logic input that powers off the charge pump and drivers when low (ROUT1B stays active); high allows operation, VIL max 0.8 V."+ "description": "Logic control input; low powers off the drivers and charge pump (receivers except ROUT1B disabled), high enables operation (low level ≤ 0.8 V)." }, { "number": "15", "name": "INVALID", "type": "output",- "description": "Valid-signal output, high if any receiver input is above 2.7 V or below −2.7 V, low when all receiver inputs stay between −0.3 V and 0.3 V for more than 30 µs."+ "description": "Valid-signal output; high if any receiver input is above 2.7 V or below −2.7 V, low if all receiver inputs stay between −0.3 V and 0.3 V for more than 30 µs." }, { "number": "16", "name": "ROUT1B", "type": "output",- "description": "Always-active noninverting receiver 1 output that stays active when the device is powered down, allowing ring-indicator use."+ "description": "Always-active noninverting receiver 1 output that remains active while the device is powered down." }, { "number": "17", "name": "DIN5", "type": "input",- "description": "Driver 5 logic input, VIH min 2 V at VCC = 3.3 V, accepts up to 5.5 V."+ "description": "Driver 5 logic input; accepts 5.5 V logic with high level ≥ 2 V at VCC = 3.3 V." }, { "number": "18", "name": "ROUT3", "type": "output",- "description": "Receiver 3 logic output, high-impedance when FORCEOFF is low."+ "description": "Receiver 3 logic output, high impedance when FORCEOFF is low." }, { "number": "19", "name": "DIN4", "type": "input",- "description": "Driver 4 logic input, VIH min 2 V at VCC = 3.3 V, accepts up to 5.5 V."+ "description": "Driver 4 logic input; accepts 5.5 V logic with high level ≥ 2 V at VCC = 3.3 V." }, { "number": "20", "name": "ROUT2", "type": "output",- "description": "Receiver 2 logic output, high-impedance when FORCEOFF is low."+ "description": "Receiver 2 logic output, high impedance when FORCEOFF is low." }, { "number": "21", "name": "ROUT1", "type": "output",- "description": "Receiver 1 logic output, high-impedance when FORCEOFF is low."+ "description": "Receiver 1 logic output, high impedance when FORCEOFF is low." }, { "number": "22", "name": "DIN3", "type": "input",- "description": "Driver 3 logic input, VIH min 2 V at VCC = 3.3 V, accepts up to 5.5 V."+ "description": "Driver 3 logic input; accepts 5.5 V logic with high level ≥ 2 V at VCC = 3.3 V." }, { "number": "23", "name": "DIN2", "type": "input",- "description": "Driver 2 logic input, VIH min 2 V at VCC = 3.3 V, accepts up to 5.5 V."+ "description": "Driver 2 logic input; accepts 5.5 V logic with high level ≥ 2 V at VCC = 3.3 V." }, { "number": "24", "name": "DIN1", "type": "input",- "description": "Driver 1 logic input, VIH min 2 V at VCC = 3.3 V, accepts up to 5.5 V."+ "description": "Driver 1 logic input; accepts 5.5 V logic with high level ≥ 2 V at VCC = 3.3 V." }, { "number": "25", "name": "C1−", "type": "passive",- "description": "Negative terminal of charge-pump capacitor C1, connected between C1+ and C1−."+ "description": "Negative terminal of charge-pump capacitor C1." }, { "number": "26", "name": "VCC", "type": "power_in",- "description": "Supply voltage of 3 V to 5.5 V, absolute maximum 6 V, bypassed with 0.1 µF."+ "description": "Supply voltage input, 3 V to 5.5 V (abs max −0.3 V to 6 V), bypassed with 0.1 µF." }, { "number": "27", "name": "V+", "type": "power_out",- "description": "Positive charge-pump output supply, rated −0.3 V to 7 V, decoupled with capacitor C3 to VCC or GND."+ "description": "Positive charge-pump output supply (about +5.5 V), abs max −0.3 V to 7 V, decoupled with capacitor C3." }, { "number": "28", "name": "C1+", "type": "passive",- "description": "Positive terminal of charge-pump capacitor C1, connected between C1+ and C1−."+ "description": "Positive terminal of charge-pump capacitor C1, connected to C1− through the external capacitor." } ], "provenance": {@@ -222,22 +222,22 @@ "factory_chain": { "factory": "2.0.0", "extractor": "extract_pins 0.3",- "primary_model": "claude-sonnet-5-5",+ "primary_model": "claude-haiku-5-5", "primary_mode": "text", "consensus_model": "claude-sonnet-5-5", "consensus": "agreed", "guards": "pin_guards 0.1: passed", "guard_notes": [- "extractor flagged: Pins 13, 14, 17-24 descriptions combine pin-name function tables with electrical limits from other p"+ "extractor flagged: The DB pin numbers were taken from the page 1 top-view listing, which is extracted as a text sequenc; Charge-pump capacitor value descriptions for C1 and C2 reflect the VCC-dependent capacitor table on ; Pin descriptions for the DIN/ROUT/RIN/DOUT signals give only the limits stated in the datasheet; the" ],- "pages_sent": 25,- "cost_usd": 0.1936,- "at": "2026-11-12T04:59:07"+ "pages_sent": 23,+ "cost_usd": 0.1127,+ "at": "2026-11-12T08:02:51" }, "datasheet": {- "url": "https://www.ti.com/lit/ds/symlink/max3238eidbr.pdf",- "pages": 25,- "sha256": "9274b6d0e769ad30",+ "url": "https://www.ti.com/lit/ds/symlink/max3238e.pdf",+ "pages": 23,+ "sha256": "1d519ae7a9e53f86", "source_tier": "mfr" }, "cad": "KiCad official (CC-BY-SA 4.0)",@@ -287,14 +287,14 @@ "zmin_mm": 0, "centre_offset_mm": 0, "footprint_binding": "identity",- "sha256": "8728f68d73c6f3f58df864dad7ef72498bd5f1d0019b0024411282b3d91bea31",+ "sha256": "e25e8a6ee2ce148e5ed58066add1f2cc60eaa6fc2c50abe00589098852a7e9dc", "checked": "2026-11-12", "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)" } ], "package_dims": { "package_code": "DB0028A",- "source_page": 18,+ "source_page": 20, "D": { "nom_mm": 10.2, "range_mm": [@@ -310,7 +310,7 @@ ] }, "E": {- "nom_mm": 8.2,+ "nom_mm": 7.8, "range_mm": [ 7.4, 8.2@@ -983,5 +983,7 @@ ], "visibility": { "public": true- }+ },+ "description": "Texas Instruments Pre-ordered Chips, SSOP-28-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",+ "org": "adom" }