main
History Download
Ray Publish 0.1.0 7a4efc4

MAX3232ESE+

Analog Devices Inc Maxim Integrated · RS232 ICs · SOIC-16

MAX3232ESE+ from Analog Devices Inc Maxim Integrated, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 C1+ passive Positive terminal of the voltage-doubler charge-pump capacitor; 0.1µF is required for 3.0V to 5.5V operation.
2 V+ power_out Doubling charge-pump output regulated to +5.5V regardless of VCC over the 3.0V to 5.5V range; V+ and V- can have a maximum magnitude of 7V with an absolute difference not exceeding 13V.
3 C1- passive Negative terminal of the voltage-doubler charge-pump capacitor.
4 C2+ passive Positive terminal of the inverting charge-pump capacitor.
5 C2- passive Negative terminal of the inverting charge-pump capacitor.
6 V- power_out Inverting charge-pump output regulated to -5.5V regardless of VCC over the 3.0V to 5.5V range.
7 T2OUT output RS-232 transmitter output that holds at least ±5.0V into 3kΩ loads, with a continuous short-circuit duration limit and a ±13.2V output voltage absolute maximum.
8 R2IN input RS-232 receiver input with an input voltage range of ±25V.
9 R2OUT output TTL/CMOS receiver output that must stay within -0.3V to (VCC + 0.3V).
10 T2IN input TTL/CMOS transmitter input with no pullup, so unused inputs must be tied to GND or VCC; absolute maximum is -0.3V to +6V.
11 T1IN input TTL/CMOS transmitter input with no pullup, so unused inputs must be tied to GND or VCC; absolute maximum is -0.3V to +6V.
12 R1OUT output TTL/CMOS receiver output that must stay within -0.3V to (VCC + 0.3V).
13 R1IN input RS-232 receiver input with an input voltage range of ±25V.
14 T1OUT output RS-232 transmitter output that holds at least ±5.0V into 3kΩ loads, with a continuous short-circuit duration limit and a ±13.2V output voltage absolute maximum.
15 GND power_in Ground reference for the device.
16 VCC power_in Supply voltage of +3.0V to +5.5V, to be bypassed close to the IC with a 0.1µF capacitor.

Key specifications

Parameter Value
Manufacturer Analog Devices Inc Maxim Integrated
Package SOIC-16
Category Interface
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Resistance (receiver, R_IN) RIN 3 5 7 kΩ TA = +25°C 3
Input Voltage Range (R_IN) -25 25 V 2
Input Logic Threshold Low 0.8 V T_IN, EN, SHDN, MBAUD (Note 3) 2
Input Logic Threshold High 2 V VCC = 3.3V; T_IN, EN, SHDN, MBAUD (Note 3) 2
Input Logic Threshold High 2.4 V VCC = 5.0V; T_IN, EN, SHDN, MBAUD (Note 3) 2
Output Voltage Low VOL 0.4 V IOUT = 1.6mA 2
Output Leakage Current (receiver) -10 0.05 10 µA Receivers disabled 2
Input Leakage Current -1 0.01 1 µA 2
VCC Power-Supply Current ICC 0.3 1 mA No load, VCC = 3.3V or 5.0V, TA = +25°C 2
Transmitter Output Voltage Swing VOUT 5 5.4 V All transmitter outputs loaded with 3kΩ to ground 3
Output Short-Circuit Current IOS -60 35 60 mA 3
Output Resistance (transmitter, power-off) ROUT 300 10 MΩ VCC = V+ = V- = 0V, VOUT = ±2V 3
Output Leakage Current (transmitter) -25 25 µA VOUT = ±12V, VCC = 0V or 3V to 5.5V, transmitters disabled 3
Transition-Region Slew Rate 6 30 V/µs CL = 150pF to 1000pF; VCC = 3.3V, RL = 3kΩ to 7kΩ, +3V to -3V or -3V to +3V, TA = +25°C, one transmitter switching 3
Transition-Region Slew Rate 4 30 V/µs CL = 150pF to 2500pF; VCC = 3.3V, RL = 3kΩ to 7kΩ, +3V to -3V or -3V to +3V, TA = +25°C, one transmitter switching 3
Maximum Data Rate 120 235 kbps RL = 3kΩ, CL = 1000pF, one transmitter switching; Normal operation 3
VCC Supply Voltage (absolute maximum) VCC -0.3 6 V 2
V+ (absolute maximum) V+ -0.3 7 V Note 1: /V+/ and /V-/ max 7V; /V+ - V-/ max 13V 2
V- (absolute maximum) V- -7 0.3 V Note 1 2
V+ + V- (absolute maximum) V+ + V- 13 V Note 1 2
T_IN Input Voltage (absolute maximum) T_IN -0.3 6 V 2
R_IN Input Voltage (absolute maximum) R_IN -25 25 V 2
T_OUT Output Voltage (absolute maximum) T_OUT -13.2 13.2 V 2
R_OUT Output Voltage (absolute maximum; max is VCC + 0.3V) R_OUT -0.3 V Upper limit printed as VCC + 0.3V 2
Storage Temperature Range TSTG -65 150 °C 2
Lead Temperature (soldering, 10s) 300 °C Soldering, 10s 2
Supply Voltage (recommended) VCC 3 5.5 V Electrical characteristics test range, C1-C4 = 0.1µF 2
Operating Temperature Range (MAX32_ E _) TA -40 85 °C Extended (E) grade; MAX3232ESE+ is the E grade 2

CAD (KiCad official)

  • Symbol: MAX3232ESE+
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16 (KiCad packages3D, STEP)
  • 3D model files: max3232ese-etched.step / max3232ese-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max3232ese.step / max3232ese.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices Inc Maxim Integrated datasheet (17 pp, sha256 c1651b3e684c15c6, retrieved 2026-10-14, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF