main
Ray
Publish 0.1.0
04c2fc4
MAX3232ESE-MS
MSKSEMI · RS232 ICs · SOP-16
MAX3232ESE-MS from MSKSEMI, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive terminal for the first charge pump capacitor; the datasheet states the charge pump needs only four 1 µF external capacitors. |
| 2 | V+ | power_out | Doubled voltage terminal generated by the charge pump; the limiting values give V+ as VCC-0.3 to +7 V. |
| 3 | C1- | passive | Negative terminal for the first charge pump capacitor. |
| 4 | C2+ | passive | Positive terminal for the second charge pump capacitor. |
| 5 | C2- | passive | Negative terminal for the second charge pump capacitor. |
| 6 | V- | power_out | Inverted voltage terminal generated by the charge pump; the limiting values give V- as +0.3 to -7 V, and V+ + |
| 7 | T2OUT | output | Second RS-232 transmitter output; the limiting values give T1OUT/T2OUT as ±13.2 V and the transmitter output swing as ±5 V (min ±4 V) into a 3 kΩ load. |
| 8 | R2IN | input | Second RS-232 receiver input; the receiver input range is ±25 V. |
| 9 | R2OUT | output | Second receiver CMOS logic output; the limiting values give R1OUT/R2OUT as -0.3 V to VCC+0.3 V. |
| 10 | T2IN | input | Second transmitter CMOS logic input; the limiting values give T1IN/T2IN as -0.3 V to +6 V, and the input has no internal pull-up. |
| 11 | T1IN | input | First transmitter CMOS logic input; the limiting values give T1IN/T2IN as -0.3 V to +6 V, and the input has no internal pull-up. |
| 12 | R1OUT | output | First receiver CMOS logic output; the limiting values give R1OUT/R2OUT as -0.3 V to VCC+0.3 V. |
| 13 | R1IN | input | First RS-232 receiver input; the receiver input range is ±25 V. |
| 14 | T1OUT | output | First RS-232 transmitter output; the limiting values give T1OUT/T2OUT as ±13.2 V and the transmitter output swing as ±5 V (min ±4 V) into a 3 kΩ load. |
| 15 | GND | power_in | Ground; the datasheet states all voltages are referenced to ground. |
| 16 | VCC | power_in | Supply voltage; the limiting values give VCC as -0.3 V to +6 V, and the datasheet states the supply range is 3 V to 5.5 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MSKSEMI |
| Package | SOP-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.3 | 6 | V | 4 | ||
| Doubled voltage terminal | V+ | 7 | V | 4 | |||
| Inverted voltage terminal | V- | -7 | 0.3 | V | 4 | ||
| V+ + /V-/ | V+ + /V-/ | 13 | V | 4 | |||
| Transmitter input voltage range | T1IN,T2IN | -0.3 | 6 | V | 4 | ||
| Receiver input voltage range | R1IN,R2IN | -25 | 25 | V | 4 | ||
| Transmitter output voltage range | T1OUT,T2OUT | -13.2 | 13.2 | V | 4 | ||
| Receiver output voltage range | R1OUT,R2OUT | -0.3 | V | 4 | |||
| Operating temperature | -40 | 85 | ℃ | 4 | |||
| Storage temperature | -60 | 150 | ℃ | 4 | |||
| Soldering temperature | 300 | ℃ | 4 | ||||
| Continuous power | 760 | mW | 4 | ||||
| Supply voltage range (recommended) | VCC | 3 | 5.5 | V | Supply voltages from 3 V to 5.5 V | 2 | |
| Supply current with no load | Isup | 2 | mA | No load | 5 | ||
| Logic control low level | VTTIN_L | 0.8 | V | T1IN,T2IN | 5 | ||
| Logic control high level | VTTIN_H | 2 | V | T1IN,T2IN | 5 | ||
| Logic control hysteresis | 0.3 | V | T1IN,T2IN | 5 | |||
| Input logic current | ITIN | -1 | 1 | μA | T1IN,T2IN | 5 | |
| Receiver output logic-low voltage | VROL | 0.4 | V | IOUT=1.6mA, VCC=5V or 3.3V | 5 | ||
| Receiver input range | VRIN | -25 | 25 | V | 6 | ||
| Receiver input low threshold | VRIL | 0.6 | 1.1 | V | VCC=3.3V | 6 | |
| Receiver input low threshold | VRIL | 0.8 | 1.5 | V | VCC=5V | 6 | |
| Receiver input high threshold | VRIH | 1.5 | 2.4 | V | VCC=3.3V | 6 | |
| Receiver input high threshold | VRIH | 1.9 | 2.4 | V | VCC=5V | 6 | |
| Receiver input hysteresis | 0.4 | V | 6 | ||||
| Receiver input impedance | RRIN | 3 | 5 | 7 | kΩ | 6 | |
| Transmitter output swing | VTOUT | 4 | 5 | V | All transmitter outputs connected to 3kΩ load to ground | 6 | |
| Transmitter output impedance | RTOUT | 300 | Ω | VCC=0V, Transmitter Input=±2V | 6 | ||
| Transmitter short-circuit current | Itsc | 60 | mA | 6 | |||
| ESD HBM | -15 | 15 | KV | HBM; R1IN, R2IN, T1OUT, T2OUT | 7 | ||
| ESD air discharge | -15 | 15 | KV | Air discharge; R1IN, R2IN, T1OUT, T2OUT | 7 | ||
| ESD contact discharge | -8 | 8 | KV | Contact discharge; R1IN, R2IN, T1OUT, T2OUT | 7 | ||
| Data rate | 120 | kbps | RL=3kΩ, CL=1000pF | 7 | |||
| Receiver propagation delay (high-to-low) | tRPHL | 300 | ns | CL=150pF | 7 | ||
| Receiver propagation delay (low-to-high) | tRPLH | 300 | ns | CL=150pF | 7 | ||
| Receiver propagation delay skew | /tRPHL- tRPLH / | 150 | ns | 7 | |||
| Transmitter propagation delay skew | /tTPHL- tTPLH / | 150 | ns | 7 | |||
| Transmitter slew rate | SR | 4 | 30 | V/μs | RL=3kΩ |
7 |
CAD (KiCad official)
- Symbol:
MAX3232ESE-MS - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files:
max3232ese-ms-etched.step/max3232ese-ms-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max3232ese-ms.step/max3232ese-ms.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: MSKSEMI datasheet (16 pp, sha256
c043c214fb1b5b84, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MAX3232ESE-MS
**MSKSEMI** · RS232 ICs · SOP-16
MAX3232ESE-MS from MSKSEMI, in a SOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive terminal for the first charge pump capacitor; the datasheet states the charge pump needs only four 1 µF external capacitors. |
| 2 | V+ | power_out | Doubled voltage terminal generated by the charge pump; the limiting values give V+ as VCC-0.3 to +7 V. |
| 3 | C1- | passive | Negative terminal for the first charge pump capacitor. |
| 4 | C2+ | passive | Positive terminal for the second charge pump capacitor. |
| 5 | C2- | passive | Negative terminal for the second charge pump capacitor. |
| 6 | V- | power_out | Inverted voltage terminal generated by the charge pump; the limiting values give V- as +0.3 to -7 V, and V+ + |V-| must not exceed 13 V. |
| 7 | T2OUT | output | Second RS-232 transmitter output; the limiting values give T1OUT/T2OUT as ±13.2 V and the transmitter output swing as ±5 V (min ±4 V) into a 3 kΩ load. |
| 8 | R2IN | input | Second RS-232 receiver input; the receiver input range is ±25 V. |
| 9 | R2OUT | output | Second receiver CMOS logic output; the limiting values give R1OUT/R2OUT as -0.3 V to VCC+0.3 V. |
| 10 | T2IN | input | Second transmitter CMOS logic input; the limiting values give T1IN/T2IN as -0.3 V to +6 V, and the input has no internal pull-up. |
| 11 | T1IN | input | First transmitter CMOS logic input; the limiting values give T1IN/T2IN as -0.3 V to +6 V, and the input has no internal pull-up. |
| 12 | R1OUT | output | First receiver CMOS logic output; the limiting values give R1OUT/R2OUT as -0.3 V to VCC+0.3 V. |
| 13 | R1IN | input | First RS-232 receiver input; the receiver input range is ±25 V. |
| 14 | T1OUT | output | First RS-232 transmitter output; the limiting values give T1OUT/T2OUT as ±13.2 V and the transmitter output swing as ±5 V (min ±4 V) into a 3 kΩ load. |
| 15 | GND | power_in | Ground; the datasheet states all voltages are referenced to ground. |
| 16 | VCC | power_in | Supply voltage; the limiting values give VCC as -0.3 V to +6 V, and the datasheet states the supply range is 3 V to 5.5 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | MSKSEMI |
| Package | SOP-16 |
| Category | Interface |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | -0.3 | | 6 | V | | 4 |
| Doubled voltage terminal | V+ | | | 7 | V | | 4 |
| Inverted voltage terminal | V- | -7 | | 0.3 | V | | 4 |
| V+ + /V-/ | V+ + /V-/ | | | 13 | V | | 4 |
| Transmitter input voltage range | T1IN,T2IN | -0.3 | | 6 | V | | 4 |
| Receiver input voltage range | R1IN,R2IN | -25 | | 25 | V | | 4 |
| Transmitter output voltage range | T1OUT,T2OUT | -13.2 | | 13.2 | V | | 4 |
| Receiver output voltage range | R1OUT,R2OUT | -0.3 | | | V | | 4 |
| Operating temperature | | -40 | | 85 | ℃ | | 4 |
| Storage temperature | | -60 | | 150 | ℃ | | 4 |
| Soldering temperature | | | | 300 | ℃ | | 4 |
| Continuous power | | | | 760 | mW | | 4 |
| Supply voltage range (recommended) | VCC | 3 | | 5.5 | V | Supply voltages from 3 V to 5.5 V | 2 |
| Supply current with no load | Isup | | | 2 | mA | No load | 5 |
| Logic control low level | VTTIN_L | | | 0.8 | V | T1IN,T2IN | 5 |
| Logic control high level | VTTIN_H | 2 | | | V | T1IN,T2IN | 5 |
| Logic control hysteresis | | | | 0.3 | V | T1IN,T2IN | 5 |
| Input logic current | ITIN | -1 | | 1 | μA | T1IN,T2IN | 5 |
| Receiver output logic-low voltage | VROL | | | 0.4 | V | IOUT=1.6mA, VCC=5V or 3.3V | 5 |
| Receiver input range | VRIN | -25 | | 25 | V | | 6 |
| Receiver input low threshold | VRIL | 0.6 | | 1.1 | V | VCC=3.3V | 6 |
| Receiver input low threshold | VRIL | 0.8 | | 1.5 | V | VCC=5V | 6 |
| Receiver input high threshold | VRIH | 1.5 | | 2.4 | V | VCC=3.3V | 6 |
| Receiver input high threshold | VRIH | 1.9 | | 2.4 | V | VCC=5V | 6 |
| Receiver input hysteresis | | | | 0.4 | V | | 6 |
| Receiver input impedance | RRIN | 3 | 5 | 7 | kΩ | | 6 |
| Transmitter output swing | VTOUT | 4 | 5 | | V | All transmitter outputs connected to 3kΩ load to ground | 6 |
| Transmitter output impedance | RTOUT | | | 300 | Ω | VCC=0V, Transmitter Input=±2V | 6 |
| Transmitter short-circuit current | Itsc | | | 60 | mA | | 6 |
| ESD HBM | | -15 | | 15 | KV | HBM; R1IN, R2IN, T1OUT, T2OUT | 7 |
| ESD air discharge | | -15 | | 15 | KV | Air discharge; R1IN, R2IN, T1OUT, T2OUT | 7 |
| ESD contact discharge | | -8 | | 8 | KV | Contact discharge; R1IN, R2IN, T1OUT, T2OUT | 7 |
| Data rate | | | | 120 | kbps | RL=3kΩ, CL=1000pF | 7 |
| Receiver propagation delay (high-to-low) | tRPHL | | | 300 | ns | CL=150pF | 7 |
| Receiver propagation delay (low-to-high) | tRPLH | | | 300 | ns | CL=150pF | 7 |
| Receiver propagation delay skew | /tRPHL- tRPLH / | | | 150 | ns | | 7 |
| Transmitter propagation delay skew | /tTPHL- tTPLH / | | | 150 | ns | | 7 |
| Transmitter slew rate | SR | 4 | | 30 | V/μs | RL=3kΩ~7kΩ, CL=150pF~1000F, from -3.0V~3.0V or 3.0V~-3.0V | 7 |
## CAD (KiCad official)
- Symbol: `MAX3232ESE-MS`
- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`
- 3D model: SOP-16 (KiCad packages3D, STEP)
- 3D model files: `max3232ese-ms-etched.step` / `max3232ese-ms-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max3232ese-ms.step` / `max3232ese-ms.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [MSKSEMI datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8590904578273452032) (16 pp, sha256 `c043c214fb1b5b84`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/max3232ese-ms-datasheet.pdf)