main
Ray
Publish 0.1.0
9f6a645
MAX3232EEWE+T
Analog Devices Inc./Maxim Integrated · RS232 ICs · SOIC-16-300mil
MAX3232EEWE+T from Analog Devices Inc./Maxim Integrated, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive terminal of the voltage-doubler charge-pump capacitor C1; the charge pump requires 0.1µF capacitors for 3.3V operation and values must not be lower than Table 2. |
| 2 | V+ | power_out | Charge-pump output of +5.5V generated from VCC, regulated regardless of VCC over the 3.0V to 5.5V range. |
| 3 | C1- | passive | Negative terminal of the voltage-doubler charge-pump capacitor C1. |
| 4 | C2+ | passive | Positive terminal of the inverting charge-pump capacitor C2. |
| 5 | C2- | passive | Negative terminal of the inverting charge-pump capacitor C2. |
| 6 | V- | power_out | Charge-pump output of -5.5V generated from VCC, regulated regardless of VCC over the 3.0V to 5.5V range. |
| 7 | T2OUT | output | RS-232 transmitter 2 output, typically ±5.4V into 3kΩ loads with a minimum of ±5.0V, short-circuit current ±60mA typical, and continuous short-circuit duration allowed. |
| 8 | R2IN | input | RS-232 receiver 2 input with an input voltage range of -25V to +25V and typical input resistance of 5kΩ. |
| 9 | R2OUT | output | TTL/CMOS receiver 2 output, inverting, with output high of VCC-0.1V typical at -1.0mA and output low of 0.4V maximum at 1.6mA. |
| 10 | T2IN | input | TTL/CMOS transmitter 2 input with logic thresholds of 0.8V low and 2.0V (3.3V supply) or 2.4V (5V supply) high, absolute maximum -0.3V to +6V, and no internal pullup. |
| 11 | T1IN | input | TTL/CMOS transmitter 1 input with logic thresholds of 0.8V low and 2.0V (3.3V supply) or 2.4V (5V supply) high, absolute maximum -0.3V to +6V, and no internal pullup. |
| 12 | R1OUT | output | TTL/CMOS receiver 1 output, inverting, with output high of VCC-0.1V typical at -1.0mA and output low of 0.4V maximum at 1.6mA. |
| 13 | R1IN | input | RS-232 receiver 1 input with an input voltage range of -25V to +25V and typical input resistance of 5kΩ. |
| 14 | T1OUT | output | RS-232 transmitter 1 output, typically ±5.4V into 3kΩ loads with a minimum of ±5.0V, short-circuit current ±60mA typical, and continuous short-circuit duration allowed. |
| 15 | GND | power_in | Ground reference for the device. |
| 16 | VCC | power_in | Supply voltage, +3.0V to +5.5V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc./Maxim Integrated |
| Package | SOIC-16-300mil |
| Category | Communication Interface Chip |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC Power-Supply Current | 0.3 | 1 | mA | No load, VCC = 3.3V or 5.0V, TA = +25°C | 2 | ||
| Input Logic Threshold Low | 0.8 | V | (Note 3) T_IN, EN, SHDN, MBAUD | 2 | |||
| Input Logic Threshold High | 2 | V | VCC = 3.3V (Note 3) | 2 | |||
| Input Logic Threshold High | 2.4 | V | VCC = 5.0V (Note 3) | 2 | |||
| Input Leakage Current | -1 | 0.01 | 1 | µA | T_IN, EN, SHDN, MBAUD | 2 | |
| Output Leakage Current (receiver outputs) | -10 | 0.05 | 10 | µA | Receivers disabled | 2 | |
| Output Voltage Low | 0.4 | V | IOUT = 1.6mA | 2 | |||
| Receiver Input Voltage Range | -25 | 25 | V | 2 | |||
| Input Threshold Low | 0.6 | 1.2 | V | TA = +25°C; VCC = 3.3V | 2 | ||
| Input Threshold Low | 0.8 | 1.5 | V | TA = +25°C; VCC = 5.0V | 2 | ||
| Input Threshold High | 1.5 | 2.4 | V | TA = +25°C; VCC = 3.3V | 2 | ||
| Input Threshold High | 1.8 | 2.4 | V | TA = +25°C; VCC = 5.0V | 2 | ||
| Input Resistance | 3 | 5 | 7 | kΩ | TA = +25°C | 3 | |
| Output Voltage Swing | -5 | 5.4 | V | All transmitter outputs loaded with 3kΩ to ground | 3 | ||
| Output Resistance | 300 | Ω | VCC = V+ = V- = 0V, VOUT = ±2V | 3 | |||
| Output Resistance | 10 | MΩ | VCC = V+ = V- = 0V, VOUT = ±2V | 3 | |||
| Output Short-Circuit Current | -35 | 60 | mA | 3 | |||
| Output Leakage Current (transmitter outputs) | -25 | 25 | µA | VOUT = ±12V, VCC = 0V or 3V to 5.5V, transmitters disabled | 3 | ||
| Maximum Data Rate | 120 | 235 | kbps | RL = 3kΩ, CL = 1000pF, one transmitter switching | 3 | ||
| Receiver Output Enable Time | 200 | ns | Normal operation | 3 | |||
| Receiver Output Disable Time | 200 | ns | Normal operation | 3 | |||
| Transmitter Skew | / tPHL - tPLH / | 300 | ns | 3 | |||
| Receiver Skew | / tPHL - tPLH / | 300 | ns | 3 | |||
| Transition-Region Slew Rate | 6 | 30 | V/µs | VCC = 3.3V, RL = 3kΩ to 7kΩ, +3V to -3V or -3V to +3V, TA = +25°C, one transmitter switching, CL = 150pF to 1000pF | 3 | ||
| Transition-Region Slew Rate | 4 | 30 | V/µs | VCC = 3.3V, RL = 3kΩ to 7kΩ, +3V to -3V or -3V to +3V, TA = +25°C, one transmitter switching, CL = 150pF to 2500pF | 3 | ||
| Supply voltage VCC (table header range) | VCC | 3 | 5.5 | V | 2 | ||
| Operating temperature range, MAX32_ E _ (this E-grade part) | TA | -40 | 85 | °C | MAX32_ E _ | 2 | |
| Required minimum charge-pump capacitor C1 | C1 | 0.1 | µF | VCC = 3.0V to 3.6V | 9 | ||
| Required minimum charge-pump capacitors C2, C3, C4 | C2, C3, C4 | 0.1 | µF | VCC = 3.0V to 3.6V | 9 | ||
| Required minimum charge-pump capacitor C1 | C1 | 0.047 | µF | VCC = 4.5V to 5.5V | 9 | ||
| Required minimum charge-pump capacitors C2, C3, C4 | C2, C3, C4 | 0.33 | µF | VCC = 4.5V to 5.5V | 9 | ||
| Required minimum charge-pump capacitors C2, C3, C4 | C2, C3, C4 | 0.47 | µF | VCC = 3.0V to 5.5V | 9 | ||
| VCC supply voltage (absolute maximum) | VCC | -0.3 | 6 | V | 2 | ||
| V+ (absolute maximum) | V+ | -0.3 | 7 | V | Note 1 | 2 | |
| V- (absolute maximum) | V- | -7 | 0.3 | V | Note 1 | 2 | |
| V+ + V- (absolute maximum) | V+ + V- | 13 | V | Note 1 | 2 | ||
| Input voltage T_IN, SHDN, EN (absolute maximum) | -0.3 | 6 | V | 2 | |||
| R_IN input voltage (absolute maximum) | R_IN | -25 | 25 | V | 2 | ||
| T_OUT output voltage (absolute maximum) | T_OUT | -13.2 | 13.2 | V | 2 | ||
| Storage temperature range | -65 | 150 | °C | 2 | |||
| Lead temperature (soldering) | 300 | °C | soldering, 10s | 2 | |||
| Thermal resistance junction-to-ambient, 16-Pin Wide SO (W16+1) | θJA | 105 | °C/W | Single layer board | 16 | ||
| Thermal resistance junction-to-case, 16-Pin Wide SO (W16+1) | θJC | 22 | °C/W | Single layer board | 16 | ||
| Thermal resistance junction-to-ambient, 16-Pin Wide SO (W16+1) | θJA | 71 | °C/W | Multi layer board | 16 | ||
| Thermal resistance junction-to-case, 16-Pin Wide SO (W16+1) | θJC | 23 | °C/W | Multi layer board | 16 |
CAD (KiCad official)
- Symbol:
MAX3232EEWE+T - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
max3232eewe-t-etched.step/max3232eewe-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max3232eewe-t.step/max3232eewe-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc./Maxim Integrated datasheet (17 pp, sha256
6179886183cdd63b, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MAX3232EEWE+T
**Analog Devices Inc./Maxim Integrated** · RS232 ICs · SOIC-16-300mil
MAX3232EEWE+T from Analog Devices Inc./Maxim Integrated, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive terminal of the voltage-doubler charge-pump capacitor C1; the charge pump requires 0.1µF capacitors for 3.3V operation and values must not be lower than Table 2. |
| 2 | V+ | power_out | Charge-pump output of +5.5V generated from VCC, regulated regardless of VCC over the 3.0V to 5.5V range. |
| 3 | C1- | passive | Negative terminal of the voltage-doubler charge-pump capacitor C1. |
| 4 | C2+ | passive | Positive terminal of the inverting charge-pump capacitor C2. |
| 5 | C2- | passive | Negative terminal of the inverting charge-pump capacitor C2. |
| 6 | V- | power_out | Charge-pump output of -5.5V generated from VCC, regulated regardless of VCC over the 3.0V to 5.5V range. |
| 7 | T2OUT | output | RS-232 transmitter 2 output, typically ±5.4V into 3kΩ loads with a minimum of ±5.0V, short-circuit current ±60mA typical, and continuous short-circuit duration allowed. |
| 8 | R2IN | input | RS-232 receiver 2 input with an input voltage range of -25V to +25V and typical input resistance of 5kΩ. |
| 9 | R2OUT | output | TTL/CMOS receiver 2 output, inverting, with output high of VCC-0.1V typical at -1.0mA and output low of 0.4V maximum at 1.6mA. |
| 10 | T2IN | input | TTL/CMOS transmitter 2 input with logic thresholds of 0.8V low and 2.0V (3.3V supply) or 2.4V (5V supply) high, absolute maximum -0.3V to +6V, and no internal pullup. |
| 11 | T1IN | input | TTL/CMOS transmitter 1 input with logic thresholds of 0.8V low and 2.0V (3.3V supply) or 2.4V (5V supply) high, absolute maximum -0.3V to +6V, and no internal pullup. |
| 12 | R1OUT | output | TTL/CMOS receiver 1 output, inverting, with output high of VCC-0.1V typical at -1.0mA and output low of 0.4V maximum at 1.6mA. |
| 13 | R1IN | input | RS-232 receiver 1 input with an input voltage range of -25V to +25V and typical input resistance of 5kΩ. |
| 14 | T1OUT | output | RS-232 transmitter 1 output, typically ±5.4V into 3kΩ loads with a minimum of ±5.0V, short-circuit current ±60mA typical, and continuous short-circuit duration allowed. |
| 15 | GND | power_in | Ground reference for the device. |
| 16 | VCC | power_in | Supply voltage, +3.0V to +5.5V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc./Maxim Integrated |
| Package | SOIC-16-300mil |
| Category | Communication Interface Chip |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC Power-Supply Current | | | 0.3 | 1 | mA | No load, VCC = 3.3V or 5.0V, TA = +25°C | 2 |
| Input Logic Threshold Low | | | | 0.8 | V | (Note 3) T_IN, EN, SHDN, MBAUD | 2 |
| Input Logic Threshold High | | 2 | | | V | VCC = 3.3V (Note 3) | 2 |
| Input Logic Threshold High | | 2.4 | | | V | VCC = 5.0V (Note 3) | 2 |
| Input Leakage Current | | -1 | 0.01 | 1 | µA | T_IN, EN, SHDN, MBAUD | 2 |
| Output Leakage Current (receiver outputs) | | -10 | 0.05 | 10 | µA | Receivers disabled | 2 |
| Output Voltage Low | | | | 0.4 | V | IOUT = 1.6mA | 2 |
| Receiver Input Voltage Range | | -25 | | 25 | V | | 2 |
| Input Threshold Low | | 0.6 | 1.2 | | V | TA = +25°C; VCC = 3.3V | 2 |
| Input Threshold Low | | 0.8 | 1.5 | | V | TA = +25°C; VCC = 5.0V | 2 |
| Input Threshold High | | 1.5 | 2.4 | | V | TA = +25°C; VCC = 3.3V | 2 |
| Input Threshold High | | 1.8 | 2.4 | | V | TA = +25°C; VCC = 5.0V | 2 |
| Input Resistance | | 3 | 5 | 7 | kΩ | TA = +25°C | 3 |
| Output Voltage Swing | | -5 | 5.4 | | V | All transmitter outputs loaded with 3kΩ to ground | 3 |
| Output Resistance | | 300 | | | Ω | VCC = V+ = V- = 0V, VOUT = ±2V | 3 |
| Output Resistance | | | | 10 | MΩ | VCC = V+ = V- = 0V, VOUT = ±2V | 3 |
| Output Short-Circuit Current | | -35 | 60 | | mA | | 3 |
| Output Leakage Current (transmitter outputs) | | -25 | | 25 | µA | VOUT = ±12V, VCC = 0V or 3V to 5.5V, transmitters disabled | 3 |
| Maximum Data Rate | | 120 | 235 | | kbps | RL = 3kΩ, CL = 1000pF, one transmitter switching | 3 |
| Receiver Output Enable Time | | | | 200 | ns | Normal operation | 3 |
| Receiver Output Disable Time | | | | 200 | ns | Normal operation | 3 |
| Transmitter Skew | / tPHL - tPLH / | | | 300 | ns | | 3 |
| Receiver Skew | / tPHL - tPLH / | | | 300 | ns | | 3 |
| Transition-Region Slew Rate | | 6 | | 30 | V/µs | VCC = 3.3V, RL = 3kΩ to 7kΩ, +3V to -3V or -3V to +3V, TA = +25°C, one transmitter switching, CL = 150pF to 1000pF | 3 |
| Transition-Region Slew Rate | | 4 | | 30 | V/µs | VCC = 3.3V, RL = 3kΩ to 7kΩ, +3V to -3V or -3V to +3V, TA = +25°C, one transmitter switching, CL = 150pF to 2500pF | 3 |
| Supply voltage VCC (table header range) | VCC | 3 | | 5.5 | V | | 2 |
| Operating temperature range, MAX32_ _E_ _ (this E-grade part) | TA | -40 | | 85 | °C | MAX32_ _E_ _ | 2 |
| Required minimum charge-pump capacitor C1 | C1 | 0.1 | | | µF | VCC = 3.0V to 3.6V | 9 |
| Required minimum charge-pump capacitors C2, C3, C4 | C2, C3, C4 | 0.1 | | | µF | VCC = 3.0V to 3.6V | 9 |
| Required minimum charge-pump capacitor C1 | C1 | 0.047 | | | µF | VCC = 4.5V to 5.5V | 9 |
| Required minimum charge-pump capacitors C2, C3, C4 | C2, C3, C4 | 0.33 | | | µF | VCC = 4.5V to 5.5V | 9 |
| Required minimum charge-pump capacitors C2, C3, C4 | C2, C3, C4 | 0.47 | | | µF | VCC = 3.0V to 5.5V | 9 |
| VCC supply voltage (absolute maximum) | VCC | -0.3 | | 6 | V | | 2 |
| V+ (absolute maximum) | V+ | -0.3 | | 7 | V | Note 1 | 2 |
| V- (absolute maximum) | V- | -7 | | 0.3 | V | Note 1 | 2 |
| V+ + V- (absolute maximum) | V+ + V- | | | 13 | V | Note 1 | 2 |
| Input voltage T_IN, SHDN, EN (absolute maximum) | | -0.3 | | 6 | V | | 2 |
| R_IN input voltage (absolute maximum) | R_IN | -25 | | 25 | V | | 2 |
| T_OUT output voltage (absolute maximum) | T_OUT | -13.2 | | 13.2 | V | | 2 |
| Storage temperature range | | -65 | | 150 | °C | | 2 |
| Lead temperature (soldering) | | | | 300 | °C | soldering, 10s | 2 |
| Thermal resistance junction-to-ambient, 16-Pin Wide SO (W16+1) | θJA | | 105 | | °C/W | Single layer board | 16 |
| Thermal resistance junction-to-case, 16-Pin Wide SO (W16+1) | θJC | | 22 | | °C/W | Single layer board | 16 |
| Thermal resistance junction-to-ambient, 16-Pin Wide SO (W16+1) | θJA | | 71 | | °C/W | Multi layer board | 16 |
| Thermal resistance junction-to-case, 16-Pin Wide SO (W16+1) | θJC | | 23 | | °C/W | Multi layer board | 16 |
## CAD (KiCad official)
- Symbol: `MAX3232EEWE+T`
- Footprint: `Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm`
- 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files: `max3232eewe-t-etched.step` / `max3232eewe-t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max3232eewe-t.step` / `max3232eewe-t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices Inc./Maxim Integrated datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/max3222-max3241.pdf) (17 pp, sha256 `6179886183cdd63b`, retrieved 2026-11-11, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/max3232eewe-t-datasheet.pdf)