main
Ray Publish 0.1.0 c4bd55c
{
  "slug": "max3232ecdw",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments Pre-ordered Chips, SOIC-16-300mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface ics",
    "max3232ecdw",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "max3232ecdw.kicad_sym",
    "max3232ecdw.kicad_mod",
    "max3232ecdw.glb",
    "max3232ecdw.step",
    "max3232ecdw.lbr",
    "docs/hero.png",
    "docs/max3232ecdw-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "max3232ecdw-hero.glb",
    "max3232ecdw-hero.overlay.json",
    "max3232ecdw-etched.glb"
  ],
  "component": {
    "mpn": "MAX3232ECDW",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-16-300mil",
    "pin_count": 16,
    "category": "Interface ICs",
    "subcategory": "Pre-ordered Chips",
    "datasheet": "https://www.ti.com/lit/ds/symlink/max3232e.pdf",
    "parts": {
      "symbol": "max3232ecdw.kicad_sym",
      "footprint": "max3232ecdw.kicad_mod",
      "model_3d": "max3232ecdw-hero.glb",
      "model_3d_plain": "max3232ecdw-etched.glb",
      "model_3d_step": "max3232ecdw-etched.step",
      "model_3d_step_plain": "max3232ecdw.step",
      "lbr": "max3232ecdw.lbr"
    },
    "distributor_links": {
      "lcsc": "C1544667",
      "digikey": "296-33385-5-ND",
      "mouser": "595-MAX3232ECDW"
    },
    "distributor_check": {
      "checked_at": "2026-11-11T06:11:39Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-33385-5-ND",
        "status": "found",
        "lifecycle": "Obsolete"
      },
      "mouser": {
        "pn": "595-MAX3232ECDW",
        "status": "found",
        "lifecycle": "End of Life"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "C1+",
        "type": "passive",
        "description": "Positive lead of the C1 charge-pump capacitor, which is 0.1 µF at VCC = 3.3 V and 0.047 µF at VCC = 5 V per Table 9-1."
      },
      {
        "number": "2",
        "name": "V+",
        "type": "power_out",
        "description": "Positive charge-pump output for the storage capacitor only, not for an external load."
      },
      {
        "number": "3",
        "name": "C1-",
        "type": "passive",
        "description": "Negative lead of the C1 charge-pump capacitor."
      },
      {
        "number": "4",
        "name": "C2+",
        "type": "passive",
        "description": "Positive lead of the C2 charge-pump capacitor, which is 0.1 µF at VCC = 3.3 V and 0.33 µF at VCC = 5 V per Table 9-1."
      },
      {
        "number": "5",
        "name": "C2-",
        "type": "passive",
        "description": "Negative lead of the C2 charge-pump capacitor."
      },
      {
        "number": "6",
        "name": "V-",
        "type": "power_out",
        "description": "Negative charge-pump output for the storage capacitor only, not for an external load."
      },
      {
        "number": "7",
        "name": "DOUT2",
        "type": "output",
        "description": "RS-232 line data output to the remote RS-232 system; the RIN and DOUT pins are rated ±15 kV HBM ESD per Section 6.2."
      },
      {
        "number": "8",
        "name": "RIN2",
        "type": "input",
        "description": "RS-232 line data input from the remote RS-232 system, with a receiver input voltage range of -25 V to 25 V."
      },
      {
        "number": "9",
        "name": "ROUT2",
        "type": "output",
        "description": "Logic data output to the UART, with a VCC - 0.6 V minimum high-level output at IOH = -1 mA."
      },
      {
        "number": "10",
        "name": "DIN2",
        "type": "input",
        "description": "Logic data input from the UART; driver input must be at or above VIH (2 V min at 3.3 V, 2.4 V min at 5 V) or at or below VIL (0.8 V max), with a 5.5 V maximum."
      },
      {
        "number": "11",
        "name": "DIN1",
        "type": "input",
        "description": "Logic data input from the UART; driver input must be at or above VIH (2 V min at 3.3 V, 2.4 V min at 5 V) or at or below VIL (0.8 V max), with a 5.5 V maximum."
      },
      {
        "number": "12",
        "name": "ROUT1",
        "type": "output",
        "description": "Logic data output to the UART, with a VCC - 0.6 V minimum high-level output at IOH = -1 mA."
      },
      {
        "number": "13",
        "name": "RIN1",
        "type": "input",
        "description": "RS-232 line data input from the remote RS-232 system, with a receiver input voltage range of -25 V to 25 V."
      },
      {
        "number": "14",
        "name": "DOUT1",
        "type": "output",
        "description": "RS-232 line data output to the remote RS-232 system; the RIN and DOUT pins are rated ±15 kV HBM ESD per Section 6.2."
      },
      {
        "number": "15",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference for the device, which is also the network ground for all voltages."
      },
      {
        "number": "16",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage, to be connected to an external 3 V to 5.5 V power supply."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: MAX3232ECDW is marked Obsolete in the package option addendum (page 15), with no orderable quantity.; The datasheet pin table lists V+ and V- as 'O' (output). They are typed power_out here because they ; The datasheet pin table lists the capacitor pins C1+, C1-, C2+ and C2- with I/O '—'. They are typed "
        ],
        "pages_sent": 30,
        "cost_usd": 0.1071,
        "at": "2026-11-11T06:11:25"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/max3232e.pdf",
        "pages": 30,
        "sha256": "fbc081a3bb4066ba",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "max3232ecdw.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          10.3,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "159663ceb2b4996b1b89d3111e4a355fc27de3e24d3570f50e5ed9086e0d73af",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "max3232ecdw-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          10.3,
          10.3,
          2.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "dbaea5748d0c4418b19fe579ba04c1365008b7a3ae588415773cbbad293a60db",
        "checked": "2026-11-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "DW0016A",
      "source_page": 24,
      "D": {
        "nom_mm": 10.3,
        "range_mm": [
          10.1,
          10.5
        ]
      },
      "E1": {
        "nom_mm": 7.5,
        "range_mm": [
          7.4,
          7.6
        ]
      },
      "E": {
        "nom_mm": 10.3,
        "range_mm": [
          9.97,
          10.63
        ]
      },
      "e": {
        "nom_mm": 1.27,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 2.65,
        "range_mm": [
          null,
          2.65
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "max3232ecdw.step",
        "verdict": "PASS",
        "reasons": [
          "height and body within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}