main
Ray
Publish 0.1.0
c4bd55c
MAX3232ECDW
Texas Instruments · Pre-ordered Chips · SOIC-16-300mil
MAX3232ECDW from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive lead of the C1 charge-pump capacitor, which is 0.1 µF at VCC = 3.3 V and 0.047 µF at VCC = 5 V per Table 9-1. |
| 2 | V+ | power_out | Positive charge-pump output for the storage capacitor only, not for an external load. |
| 3 | C1- | passive | Negative lead of the C1 charge-pump capacitor. |
| 4 | C2+ | passive | Positive lead of the C2 charge-pump capacitor, which is 0.1 µF at VCC = 3.3 V and 0.33 µF at VCC = 5 V per Table 9-1. |
| 5 | C2- | passive | Negative lead of the C2 charge-pump capacitor. |
| 6 | V- | power_out | Negative charge-pump output for the storage capacitor only, not for an external load. |
| 7 | DOUT2 | output | RS-232 line data output to the remote RS-232 system; the RIN and DOUT pins are rated ±15 kV HBM ESD per Section 6.2. |
| 8 | RIN2 | input | RS-232 line data input from the remote RS-232 system, with a receiver input voltage range of -25 V to 25 V. |
| 9 | ROUT2 | output | Logic data output to the UART, with a VCC - 0.6 V minimum high-level output at IOH = -1 mA. |
| 10 | DIN2 | input | Logic data input from the UART; driver input must be at or above VIH (2 V min at 3.3 V, 2.4 V min at 5 V) or at or below VIL (0.8 V max), with a 5.5 V maximum. |
| 11 | DIN1 | input | Logic data input from the UART; driver input must be at or above VIH (2 V min at 3.3 V, 2.4 V min at 5 V) or at or below VIL (0.8 V max), with a 5.5 V maximum. |
| 12 | ROUT1 | output | Logic data output to the UART, with a VCC - 0.6 V minimum high-level output at IOH = -1 mA. |
| 13 | RIN1 | input | RS-232 line data input from the remote RS-232 system, with a receiver input voltage range of -25 V to 25 V. |
| 14 | DOUT1 | output | RS-232 line data output to the remote RS-232 system; the RIN and DOUT pins are rated ±15 kV HBM ESD per Section 6.2. |
| 15 | GND | power_in | Ground reference for the device, which is also the network ground for all voltages. |
| 16 | VCC | power_in | Supply voltage, to be connected to an external 3 V to 5.5 V power supply. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16-300mil |
| Category | Interface ICs |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC Supply voltage | VCC | -0.3 | 6 | V | 4 | ||
| V+ Positive output supply voltage | V+ | -0.3 | 7 | V | 4 | ||
| V- Negative output supply voltage | V- | 0.3 | -7 | V | 4 | ||
| Supply voltage difference | V+, V- | 13 | V | 4 | |||
| Input voltage, drivers | VI | -0.3 | 6 | V | Drivers | 4 | |
| Input voltage, receivers | VI | -25 | 25 | V | Receivers | 4 | |
| Output voltage, drivers | VO | -13.2 | 13.2 | V | Drivers | 4 | |
| Output voltage, receivers | VO | -0.3 | V | Receivers; printed maximum is VCC + 0.3 V | 4 | ||
| Operating virtual junction temperature | TJ | 150 | °C | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage | VCC | 3 | 3.3 | 3.6 | V | VCC = 3.3 V | 4 |
| Supply voltage | VCC | 4.5 | 5 | 5.5 | V | VCC = 5 V | 4 |
| Driver high-level input voltage DIN | VIH | 2 | 5.5 | V | VCC = 3.3 V | 4 | |
| Driver high-level input voltage DIN | VIH | 2.4 | 5.5 | V | VCC = 5 V | 4 | |
| Driver low-level input voltage DIN | VIL | 0 | 0.8 | V | 4 | ||
| Receiver input voltage RIN | VI | -25 | 25 | V | 4 | ||
| Operating free-air temperature | TA | 0 | 70 | °C | MAX3232EC | 5 | |
| Supply current | ICC | 0.3 | 1 | mA | No load, VCC = 3.3 V or 5 V | 5 | |
| High-level output voltage | VOH | 5 | 5.4 | V | DOUT at RL = 3 kΩ to GND, DIN = GND | 5 | |
| Low-level output voltage | VOL | -5 | -5.4 | V | DOUT at RL = 3 kΩ to GND, DIN = VCC | 5 | |
| High-level input current | IIH | -1 | 0.01 | 1 | μA | VI = VCC | 5 |
| Low-level input current | IIL | -1 | 0.01 | 1 | μA | VI at GND | 5 |
| Output resistance | rO | 300 | 10 | MΩ | VCC, V+, and V- = 0 V, VO = ±2 V; printed as 300 Ω min and 10M Ω max | 5 | |
| High-level output voltage | VOL | 0.4 | V | IOL = 1.6 mA | 6 | ||
| Positive-going input threshold voltage | VIT+ | 1.5 | 2.4 | V | VCC = 3.3 V | 6 | |
| Positive-going input threshold voltage | VIT+ | 1.8 | 2.4 | V | VCC = 5 V | 6 | |
| Negative-going input threshold voltage | VIT- | 0.6 | 1.2 | V | VCC = 3.3 V | 6 | |
| Negative-going input threshold voltage | VIT- | 0.8 | 1.5 | V | VCC = 5 V | 6 | |
| Maximum data rate | 150 | 250 | kbit/s | RL = 3 kΩ, one DOUT switching, CL = 1000 pF | 6 | ||
| Driver slew rate, transition region | SR(tr) | 6 | 30 | V/μs | RL = 3 kΩ to 7 kΩ, VCC = 3.3 V, CL = 150 pF to 1000 pF | 6 | |
| Driver slew rate, transition region | SR(tr) | 4 | 30 | V/μs | RL = 3 kΩ to 7 kΩ, VCC = 3.3 V, CL = 150 pF to 2500 pF | 6 | |
| Driver pulse skew | tsk(p) | 300 | ns | RL = 3 kΩ to 7 kΩ, CL = 150 pF to 2500 pF | 6 | ||
| Receiver propagation delay time, low- to high-level output | tPLH | 300 | ns | CL = 150 pF | 6 | ||
| Receiver propagation delay time, high- to low-level output | tPHL | 300 | ns | CL = 150 pF | 6 | ||
| Receiver pulse skew | tsk(p) | 300 | ns | 6 | |||
| Junction-to-ambient thermal resistance (DW) | RθJA | 72.3 | °C/W | DW (SOIC) 16-pin package | 5 | ||
| Junction-to-case (top) thermal resistance (DW) | RθJCtop | 33.5 | °C/W | DW (SOIC) 16-pin package | 5 | ||
| Junction-to-board thermal resistance (DW) | RθJB | 37.1 | °C/W | DW (SOIC) 16-pin package | 5 | ||
| Junction-to-top characterization parameter (DW) | ψJT | 7.5 | °C/W | DW (SOIC) 16-pin package | 5 | ||
| Junction-to-board characterization parameter (DW) | ψJB | 37.1 | °C/W | DW (SOIC) 16-pin package | 5 |
CAD (KiCad official)
- Symbol:
MAX3232ECDW - Footprint:
Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm - 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files:
max3232ecdw-etched.step/max3232ecdw-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max3232ecdw.step/max3232ecdw.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (30 pp, sha256
fbc081a3bb4066ba, retrieved 2026-11-11, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MAX3232ECDW
**Texas Instruments** · Pre-ordered Chips · SOIC-16-300mil
MAX3232ECDW from Texas Instruments, in a SOIC-16-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive lead of the C1 charge-pump capacitor, which is 0.1 µF at VCC = 3.3 V and 0.047 µF at VCC = 5 V per Table 9-1. |
| 2 | V+ | power_out | Positive charge-pump output for the storage capacitor only, not for an external load. |
| 3 | C1- | passive | Negative lead of the C1 charge-pump capacitor. |
| 4 | C2+ | passive | Positive lead of the C2 charge-pump capacitor, which is 0.1 µF at VCC = 3.3 V and 0.33 µF at VCC = 5 V per Table 9-1. |
| 5 | C2- | passive | Negative lead of the C2 charge-pump capacitor. |
| 6 | V- | power_out | Negative charge-pump output for the storage capacitor only, not for an external load. |
| 7 | DOUT2 | output | RS-232 line data output to the remote RS-232 system; the RIN and DOUT pins are rated ±15 kV HBM ESD per Section 6.2. |
| 8 | RIN2 | input | RS-232 line data input from the remote RS-232 system, with a receiver input voltage range of -25 V to 25 V. |
| 9 | ROUT2 | output | Logic data output to the UART, with a VCC - 0.6 V minimum high-level output at IOH = -1 mA. |
| 10 | DIN2 | input | Logic data input from the UART; driver input must be at or above VIH (2 V min at 3.3 V, 2.4 V min at 5 V) or at or below VIL (0.8 V max), with a 5.5 V maximum. |
| 11 | DIN1 | input | Logic data input from the UART; driver input must be at or above VIH (2 V min at 3.3 V, 2.4 V min at 5 V) or at or below VIL (0.8 V max), with a 5.5 V maximum. |
| 12 | ROUT1 | output | Logic data output to the UART, with a VCC - 0.6 V minimum high-level output at IOH = -1 mA. |
| 13 | RIN1 | input | RS-232 line data input from the remote RS-232 system, with a receiver input voltage range of -25 V to 25 V. |
| 14 | DOUT1 | output | RS-232 line data output to the remote RS-232 system; the RIN and DOUT pins are rated ±15 kV HBM ESD per Section 6.2. |
| 15 | GND | power_in | Ground reference for the device, which is also the network ground for all voltages. |
| 16 | VCC | power_in | Supply voltage, to be connected to an external 3 V to 5.5 V power supply. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-16-300mil |
| Category | Interface ICs |
| Pins | 16 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC Supply voltage | VCC | -0.3 | | 6 | V | | 4 |
| V+ Positive output supply voltage | V+ | -0.3 | | 7 | V | | 4 |
| V- Negative output supply voltage | V- | 0.3 | | -7 | V | | 4 |
| Supply voltage difference | V+, V- | | | 13 | V | | 4 |
| Input voltage, drivers | VI | -0.3 | | 6 | V | Drivers | 4 |
| Input voltage, receivers | VI | -25 | | 25 | V | Receivers | 4 |
| Output voltage, drivers | VO | -13.2 | | 13.2 | V | Drivers | 4 |
| Output voltage, receivers | VO | -0.3 | | | V | Receivers; printed maximum is VCC + 0.3 V | 4 |
| Operating virtual junction temperature | TJ | | | 150 | °C | | 4 |
| Storage temperature | Tstg | -65 | | 150 | °C | | 4 |
| Supply voltage | VCC | 3 | 3.3 | 3.6 | V | VCC = 3.3 V | 4 |
| Supply voltage | VCC | 4.5 | 5 | 5.5 | V | VCC = 5 V | 4 |
| Driver high-level input voltage DIN | VIH | 2 | | 5.5 | V | VCC = 3.3 V | 4 |
| Driver high-level input voltage DIN | VIH | 2.4 | | 5.5 | V | VCC = 5 V | 4 |
| Driver low-level input voltage DIN | VIL | 0 | | 0.8 | V | | 4 |
| Receiver input voltage RIN | VI | -25 | | 25 | V | | 4 |
| Operating free-air temperature | TA | 0 | | 70 | °C | MAX3232EC | 5 |
| Supply current | ICC | | 0.3 | 1 | mA | No load, VCC = 3.3 V or 5 V | 5 |
| High-level output voltage | VOH | 5 | 5.4 | | V | DOUT at RL = 3 kΩ to GND, DIN = GND | 5 |
| Low-level output voltage | VOL | -5 | -5.4 | | V | DOUT at RL = 3 kΩ to GND, DIN = VCC | 5 |
| High-level input current | IIH | -1 | 0.01 | 1 | μA | VI = VCC | 5 |
| Low-level input current | IIL | -1 | 0.01 | 1 | μA | VI at GND | 5 |
| Output resistance | rO | 300 | | 10 | MΩ | VCC, V+, and V- = 0 V, VO = ±2 V; printed as 300 Ω min and 10M Ω max | 5 |
| High-level output voltage | VOL | | | 0.4 | V | IOL = 1.6 mA | 6 |
| Positive-going input threshold voltage | VIT+ | 1.5 | 2.4 | | V | VCC = 3.3 V | 6 |
| Positive-going input threshold voltage | VIT+ | 1.8 | 2.4 | | V | VCC = 5 V | 6 |
| Negative-going input threshold voltage | VIT- | 0.6 | 1.2 | | V | VCC = 3.3 V | 6 |
| Negative-going input threshold voltage | VIT- | 0.8 | 1.5 | | V | VCC = 5 V | 6 |
| Maximum data rate | | 150 | 250 | | kbit/s | RL = 3 kΩ, one DOUT switching, CL = 1000 pF | 6 |
| Driver slew rate, transition region | SR(tr) | 6 | | 30 | V/μs | RL = 3 kΩ to 7 kΩ, VCC = 3.3 V, CL = 150 pF to 1000 pF | 6 |
| Driver slew rate, transition region | SR(tr) | 4 | | 30 | V/μs | RL = 3 kΩ to 7 kΩ, VCC = 3.3 V, CL = 150 pF to 2500 pF | 6 |
| Driver pulse skew | tsk(p) | | | 300 | ns | RL = 3 kΩ to 7 kΩ, CL = 150 pF to 2500 pF | 6 |
| Receiver propagation delay time, low- to high-level output | tPLH | | | 300 | ns | CL = 150 pF | 6 |
| Receiver propagation delay time, high- to low-level output | tPHL | | | 300 | ns | CL = 150 pF | 6 |
| Receiver pulse skew | tsk(p) | | | 300 | ns | | 6 |
| Junction-to-ambient thermal resistance (DW) | RθJA | | 72.3 | | °C/W | DW (SOIC) 16-pin package | 5 |
| Junction-to-case (top) thermal resistance (DW) | RθJCtop | | 33.5 | | °C/W | DW (SOIC) 16-pin package | 5 |
| Junction-to-board thermal resistance (DW) | RθJB | | 37.1 | | °C/W | DW (SOIC) 16-pin package | 5 |
| Junction-to-top characterization parameter (DW) | ψJT | | 7.5 | | °C/W | DW (SOIC) 16-pin package | 5 |
| Junction-to-board characterization parameter (DW) | ψJB | | 37.1 | | °C/W | DW (SOIC) 16-pin package | 5 |
## CAD (KiCad official)
- Symbol: `MAX3232ECDW`
- Footprint: `Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm`
- 3D model: SOIC-16-300mil (KiCad packages3D, STEP)
- 3D model files: `max3232ecdw-etched.step` / `max3232ecdw-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max3232ecdw.step` / `max3232ecdw.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/lit/ds/symlink/max3232e.pdf) (30 pp, sha256 `fbc081a3bb4066ba`, retrieved 2026-11-11, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/max3232ecdw-datasheet.pdf)