main
History Download
Ray Publish 0.1.1 c9566a8

MAX3232AECN

HGSEMI · RS232 ICs · DIP-16

MAX3232AECN from HGSEMI, in a DIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 C1+ passive Positive terminal of the voltage-doubler charge-pump capacitor, which uses 0.1 µF at 3.3 V (±0.3 V) or 0.047 µF at 5 V (±0.5 V) per the datasheet.
2 V+ power_out Positive charge-pump output; the datasheet limits it to -0.3 V to +7 V absolute maximum, and V+ minus V- must not exceed 13 V.
3 C1- passive Negative terminal of the voltage-doubler charge-pump capacitor.
4 C2+ passive Positive terminal of the inverting charge-pump capacitor, which uses 0.33 µF at 5 V (±0.5 V) or 0.1 µF at 3.3 V (±0.3 V) per the datasheet.
5 C2- passive Negative terminal of the inverting charge-pump capacitor.
6 V- power_out Negative charge-pump output; the datasheet limits it to -7 V to +0.3 V absolute range (stated as -0.3 V to -7 V), with V+ minus V- not exceeding 13 V.
7 DOUT2 output RS-232 driver output that the datasheet rates at -13.2 V to +13.2 V absolute maximum and that is short-circuit protected to ground.
8 RIN2 input RS-232 receiver input rated at -25 V to +25 V, with an input impedance of 3 kΩ to 7 kΩ over ±3 V to ±25 V.
9 ROUT2 output TTL/CMOS receiver output that must stay within -0.3 V to VCC+0.3 V absolute range.
10 DIN2 input TTL/CMOS driver input with a maximum absolute rating of +6 V, a high-level input of 2.0 V (3.3 V supply) or 2.4 V (5 V supply) minimum, and a low-level input of 0.8 V maximum.
11 DIN1 input TTL/CMOS driver input with a maximum absolute rating of +6 V, a high-level input of 2.0 V (3.3 V supply) or 2.4 V (5 V supply) minimum, and a low-level input of 0.8 V maximum.
12 ROUT1 output TTL/CMOS receiver output that must stay within -0.3 V to VCC+0.3 V absolute range.
13 RIN1 input RS-232 receiver input rated at -25 V to +25 V, with an input impedance of 3 kΩ to 7 kΩ over ±3 V to ±25 V.
14 DOUT1 output RS-232 driver output that the datasheet rates at -13.2 V to +13.2 V absolute maximum and that is short-circuit protected to ground.
15 GND power_in Ground reference for the device.
16 VCC power_in Supply voltage, recommended at +3.0 V to +5.5 V (absolute maximum +6 V).

Key specifications

Parameter Value
Manufacturer HGSEMI
Package DIP-16
Category Interface
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (absolute maximum) VCC 6 V 3
Charge-pump positive output voltage (absolute maximum) V+ -0.3 7 V 3
Charge-pump negative output voltage (absolute maximum) V- -7 -0.3 V 3
Driver output voltage V+ to V- (absolute maximum) V+ ~ V- 13 V 3
Driver input voltage (absolute maximum) -0.3 6 V 3
Receiver input voltage (absolute maximum) -25 25 V 3
Driver output voltage (absolute maximum) -13.2 13.2 V 3
Receiver output voltage (absolute maximum) -0.3 V Maximum printed as VCC+0.3 V (expression, not converted) 3
Storage temperature (absolute maximum) -65 150 ℃ 3
Junction temperature (absolute maximum) 150 ℃ 3
Soldering temperature (absolute maximum) TLEAD 245 ℃ 10S 3
Supply voltage VCC 3 3.3 3.6 V VCC=3.3V 4
Supply voltage VCC 4.5 5 5.5 V VCC=5V 4
Driver input high voltage DIN VIH 2 5.5 V VCC=3.3V 4
Driver input high voltage DIN VIH 2.4 5.5 V VCC=5V 4
Driver input low voltage DIN VIL 0 0.8 V 4
Receiver input voltage RIN VI -25 25 V 4
Operating temperature -40 85 ℃ 4
Supply current ICC 1 mA 空载,VCC=3.3V or 5.0V,TA=25℃ 4
Driver output high voltage VOH 5 5.4 V DOUT 负载 RL=3kΩ,DIN=GND 4
Driver output low voltage VOL -5.4 -5 V DOUT 负载 RL=3kΩ,DIN=VCC 4
Driver input high-level input current IIH -1 1 µA VI=VCC 4
Driver input low-level input current IIL -1 1 µA VI 接 GND 4
Driver short-circuit output current IOS -60 60 mA VCC=3.6V,VO=0V 4
Driver output impedance ro 300 Ω VCC,V+和V-=0V,VO=±2V 4
Receiver output low voltage VOL 0.4 mV IOL=1.6mA 4
Positive-going input threshold voltage VIT+ 1.5 2.4 V VCC=3.3V 4
Positive-going input threshold voltage VIT+ 2 2.4 V VCC=5V 4
Negative-going input threshold voltage VIT- 0.6 1.1 V VCC=3.3V 4
Negative-going input threshold voltage VIT- 0.8 1.5 V VCC=5V 4
Input impedance ri 3 5 7 kΩ VI=±3V 至 ±25V 4
ESD HBM, RS-232 pins V(ESD) -15 15 kV 静电保护(232 引脚)HBM 人体模式 4
ESD MM, RS-232 pins V(ESD) -800 800 V 静电保护(232 引脚)MM 机器模式 4
ESD contact discharge, RS-232 pins V(ESD) -10 10 kV 接触放电 IEC 61000-4-2 4
ESD air discharge, RS-232 pins V(ESD) -15 15 kV 空气放电 IEC 61000-4-2 4
ESD HBM, other pins V(ESD) -4 4 kV 静电保护(其它引脚)HBM 人体模式 4
ESD MM, other pins V(ESD) -400 400 V 静电保护(其它引脚)MM 机器模式 4
Maximum data rate F MAX 250 kbps RL=3kΩ,CL=1000pF 5
Driver output skew tsk(p) 100 ns RL=3kΩ至7kΩ,CL=150pF 至2500pF,见图 3 5
Driver slew rate SR(tr) 6 30 V/µs RL=3k 至7kΩ, VCC=3.3V, CL=150pF 至1000pF 5
Driver slew rate SR(tr) 4 30 V/µs CL=150pF 至2500pF 5
Receiver output propagation delay low-to-high tPLH 150 ns CL=150pF,见图 4 5
Receiver output propagation delay high-to-low tPHL 150 ns 5
Receiver output skew tsk(p) 60 ns 5
Hysteresis voltage Vhys 0.4 V 4

CAD (KiCad official)

  • Symbol: MAX3232AECN
  • Footprint: Package_DIP:DIP-16_W7.62mm
  • 3D model: DIP-16 (KiCad packages3D, STEP)
  • 3D model files: max3232aecn-etched.step / max3232aecn-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max3232aecn.step / max3232aecn.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HGSEMI datasheet (12 pp, sha256 fa275fd9e0703f25, retrieved 2026-11-12, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF