Generated by kicad-footprint-generator · KiCad file format 20260206
MAX3232AECMT
HGSEMI · RS232 ICs · TSSOP-16
MAX3232AECMT from HGSEMI, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive terminal of the voltage-doubler charge-pump capacitor, which uses 0.1 µF at VCC=3.3 V or 0.047 µF at VCC=5 V per the application table. |
| 2 | V+ | power_out | Positive supply rail generated by the internal charge pump; V+ may reach 7 V maximum and the V+ to V- difference must not exceed 13 V. |
| 3 | C1- | passive | Negative terminal of the voltage-doubler charge-pump capacitor. |
| 4 | C2+ | passive | Positive terminal of the inverting charge-pump capacitor, which uses 0.1 µF at VCC=3.3 V or 0.33 µF at VCC=5 V per the application table. |
| 5 | C2- | passive | Negative terminal of the inverting charge-pump capacitor. |
| 6 | V- | power_out | Negative supply rail generated by the internal charge pump; V- may reach -7 V maximum. |
| 7 | DOUT2 | output | RS-232 driver output 2, limited to -13.2 V to +13.2 V and short-circuit protected to ground. |
| 8 | RIN2 | input | RS-232 receiver input 2, rated for input voltages of -25 V to +25 V. |
| 9 | ROUT2 | output | TTL/CMOS receiver output 2, rated from -0.3 V to VCC+0.3 V. |
| 10 | DIN2 | input | TTL/CMOS driver input 2, with VIH of at least 2.0 V (VCC=3.3 V) or 2.4 V (VCC=5 V) and VIL of at most 0.8 V; input rated to 6 V maximum. |
| 11 | DIN1 | input | TTL/CMOS driver input 1, with VIH of at least 2.0 V (VCC=3.3 V) or 2.4 V (VCC=5 V) and VIL of at most 0.8 V; input rated to 6 V maximum. |
| 12 | ROUT1 | output | TTL/CMOS receiver output 1, rated from -0.3 V to VCC+0.3 V. |
| 13 | RIN1 | input | RS-232 receiver input 1, rated for input voltages of -25 V to +25 V. |
| 14 | DOUT1 | output | RS-232 driver output 1, limited to -13.2 V to +13.2 V and short-circuit protected to ground. |
| 15 | GND | power_in | Ground reference for the device. |
| 16 | VCC | power_in | Supply pin, +3.0 V to +5.5 V; absolute maximum is +6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | HGSEMI |
| Package | TSSOP-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC | 3 | 3.3 | 3.6 | V | VCC=3.3V | 4 |
| Supply voltage | VCC | 4.5 | 5 | 5.5 | V | VCC=5V | 4 |
| Driver input high voltage DIN | VIH | 2 | 5.5 | V | VCC=3.3V | 4 | |
| Driver input high voltage DIN | VIH | 2.4 | 5.5 | V | VCC=5V | 4 | |
| Driver input low voltage DIN | VIL | 0 | 0.8 | V | 4 | ||
| Receiver input voltage RIN | VI | -25 | 25 | V | 4 | ||
| Operating ambient temperature, MAX3232AEC grade | TA | 0 | 70 | ℃ | MAX3232AEC grade (MAX3232AECMT) | 4 | |
| Supply voltage absolute maximum | VCC | 6 | V | 3 | |||
| Positive charge pump output voltage | V+ | -0.3 | 7 | V | 3 | ||
| Negative charge pump output voltage | V- | -7 | -0.3 | V | 3 | ||
| Driver output voltage V+ to V- | 13 | V | difference between V+ and V- must not exceed 13V | 3 | |||
| Driver input voltage | -0.3 | 6 | V | 3 | |||
| Receiver input voltage | -25 | 25 | V | 3 | |||
| Driver output voltage | -13.2 | 13.2 | V | 3 | |||
| Receiver output voltage | -0.3 | V | upper limit printed as VCC+0.3 V | 3 | |||
| Storage temperature | TSTORE | -65 | 150 | ℃ | 3 | ||
| Junction temperature | 150 | ℃ | 3 | ||||
| Lead soldering temperature | TLEAD | 260 | ℃ | 10 s | 3 | ||
| Positive-going receiver input threshold | VIT+ | 1.5 | 2.4 | V | VCC=3.3V | 4 | |
| Positive-going receiver input threshold | VIT+ | 2 | 2.4 | V | VCC=5V | 4 | |
| Negative-going receiver input threshold | VIT- | 0.6 | 1.1 | V | VCC=3.3V | 4 | |
| Negative-going receiver input threshold | VIT- | 0.8 | 1.5 | V | VCC=5V | 4 | |
| Driver output high voltage | VOH | 5 | 5.4 | V | RL=3kΩ, DIN=GND | 4 | |
| Driver output low voltage | VOL | -5.4 | -5 | V | RL=3kΩ, DIN=VCC | 4 | |
| Receiver output low voltage | VOL | 0.4 | mV | IOL=1.6mA | 4 | ||
| Receiver hysteresis voltage | Vhys | 0.4 | V | 4 | |||
| Input resistance | ri | 3 | 5 | 7 | kΩ | VI=±3V to ±25V | 4 |
| Supply current | ICC | 1 | mA | no load, VCC=3.3V or 5.0V, TA=25℃ | 4 | ||
| Driver input high-level input current | IIH | -1 | 0.01 | 1 | µA | VI=VCC | 4 |
| Driver input low-level input current | IIL | -1 | 0.01 | 1 | µA | VI tied to GND | 4 |
| Driver short-circuit output current | IOS | -35 | 35 | mA | VCC=3.6V, VO=0V | 4 | |
| Driver short-circuit output current | IOS | -60 | 60 | mA | VCC=5.5V, VO=0V | 4 | |
| Driver output impedance | ro | 300 | Ω | VCC, V+ and V- =0V, VO=±2V; printed max 10M | 4 | ||
| Maximum data rate | FMAX | 250 | kbps | RL=3kΩ, CL=1000pF | 5 | ||
| Driver slew rate | SR(tr) | 6 | 30 | V/µs | RL=3k to 7kΩ, VCC=3.3V, CL=150pF to 1000pF | 5 | |
| Driver slew rate | SR(tr) | 4 | 30 | V/µs | RL=3k to 7kΩ, CL=150pF to 2500pF | 5 | |
| Driver output skew | tsk(p) | 100 | ns | RL=3kΩ to 7kΩ, CL=150pF to 2500pF | 5 | ||
| Receiver output delay low to high | tPLH | 150 | ns | CL=150pF | 5 | ||
| Receiver output delay high to low | tPHL | 150 | ns | CL=150pF | 5 | ||
| Receiver output skew | tsk(p) | 60 | ns | 5 | |||
| ESD HBM, 232 pins | V(ESD) | -15 | 15 | kV | human body model | 4 | |
| ESD MM, 232 pins | V(ESD) | -800 | 800 | V | machine model | 4 | |
| ESD contact discharge, 232 pins | V(ESD) | -10 | 10 | kV | IEC 61000-4-2 contact discharge | 4 | |
| ESD air discharge, 232 pins | V(ESD) | -15 | 15 | kV | IEC 61000-4-2 air discharge | 4 | |
| ESD HBM, other pins | V(ESD) | -4 | 4 | kV | human body model | 4 | |
| ESD MM, other pins | V(ESD) | -400 | 400 | V | machine model | 4 |
CAD (KiCad official)
- Symbol:
MAX3232AECMT - Footprint:
Package_SO:TSSOP-16_4.4x5mm_P0.65mm - 3D model: TSSOP-16 (KiCad packages3D, STEP)
- 3D model files:
max3232aecmt-etched.step/max3232aecmt-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max3232aecmt.step/max3232aecmt.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: HGSEMI datasheet, copy hosted by LCSC (13 pp, sha256
2fc99b2b792e329a, retrieved 2026-11-20) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).