component
MAX3227ECAE+T
Public Made by Adomby adom
Maxim Integrated Pre-ordered Chips, SSOP-16-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243
{
"slug": "max3227ecae-t",
"version": "0.1.0",
"type": "component",
"description": "Maxim Integrated Pre-ordered Chips, SSOP-16-208mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"interface ics",
"max3227ecae+t",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"max3227ecae-t.kicad_sym",
"max3227ecae-t.kicad_mod",
"max3227ecae-t.glb",
"max3227ecae-t.step",
"max3227ecae-t.lbr",
"docs/hero.png",
"docs/max3227ecae-t-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"max3227ecae-t-hero.glb",
"max3227ecae-t-hero.overlay.json",
"max3227ecae-t-etched.glb"
],
"component": {
"mpn": "MAX3227ECAE+T",
"manufacturer": "Maxim Integrated",
"package": "SSOP-16-208mil",
"pin_count": 16,
"category": "Interface ICs",
"subcategory": "Pre-ordered Chips",
"datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/max3224e-max3245e.pdf",
"parts": {
"symbol": "max3227ecae-t.kicad_sym",
"footprint": "max3227ecae-t.kicad_mod",
"model_3d": "max3227ecae-t-hero.glb",
"model_3d_plain": "max3227ecae-t-etched.glb",
"model_3d_step": "max3227ecae-t-etched.step",
"model_3d_step_plain": "max3227ecae-t.step",
"lbr": "max3227ecae-t.lbr"
},
"distributor_links": {
"lcsc": "C2671488",
"digikey": "MAX3227ECAE+TTR-ND",
"mouser": "700-MAX3227ECAET"
},
"distributor_check": {
"checked_at": "2026-10-31T00:09:35Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "MAX3227ECAE+TTR-ND",
"status": "found"
},
"mouser": {
"pn": "700-MAX3227ECAET",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "READY",
"type": "output",
"description": "Ready to Transmit output, active-high; READY goes high when V- goes below -4V and the device is ready to transmit."
},
{
"number": "2",
"name": "C1+",
"type": "passive",
"description": "Positive terminal of the voltage-doubler charge-pump capacitor."
},
{
"number": "3",
"name": "V+",
"type": "power_out",
"description": "+5.5V generated by the charge pump."
},
{
"number": "4",
"name": "C1-",
"type": "passive",
"description": "Negative terminal of the voltage-doubler charge-pump capacitor."
},
{
"number": "5",
"name": "C2+",
"type": "passive",
"description": "Positive terminal of the inverting charge-pump capacitor."
},
{
"number": "6",
"name": "C2-",
"type": "passive",
"description": "Negative terminal of the inverting charge-pump capacitor."
},
{
"number": "7",
"name": "V-",
"type": "power_out",
"description": "-5.5V generated by the charge pump."
},
{
"number": "8",
"name": "R1IN",
"type": "input",
"description": "RS-232 receiver input; R_IN to GND is rated at ±25V absolute maximum."
},
{
"number": "9",
"name": "R1OUT",
"type": "output",
"description": "TTL/CMOS receiver output."
},
{
"number": "10",
"name": "INVALID",
"type": "output",
"description": "Valid signal detector output, active low; a logic high indicates that a valid RS-232 level is present on a receiver input."
},
{
"number": "11",
"name": "T1IN",
"type": "input",
"description": "TTL/CMOS transmitter input; the inputs have no pullup resistors, so unused inputs should be connected to GND or VCC."
},
{
"number": "12",
"name": "FORCEON",
"type": "input",
"description": "Force-On input, active-high; drive high to override AutoShutdown Plus, keeping transmitters and receivers on (FORCEOFF must be high)."
},
{
"number": "13",
"name": "T1OUT",
"type": "output",
"description": "RS-232 transmitter output; T_OUT is rated ±13.2V to GND and the outputs go high-impedance when disabled, and can be driven to ±12V when powered off or shut down."
},
{
"number": "14",
"name": "GND",
"type": "power_in",
"description": "Ground."
},
{
"number": "15",
"name": "VCC",
"type": "power_in",
"description": "Single supply voltage, +3.0V to +5.5V."
},
{
"number": "16",
"name": "FORCEOFF",
"type": "input",
"description": "Force-Off input, active-low; when low, transmitters are in high impedance, charge pumps are shut down, and receivers are active, overriding AutoShutdown Plus and FORCEON."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The ordering table lists the part as MAX3227ECAE+ (0°C to +70°C, 16-pin SSOP). The '+T' tape-and-ree; The text gives the package as 16-SSOP (code A16+2) but does not state a 208mil body width. The pinou; Pins 1-16 were mapped from the MAX3226E/MAX3227E SSOP/TSSOP column of the pin description table (pag",
"2/16 pins cited to the wrong page (name found elsewhere): ['8:R1IN@p11', '9:R1OUT@p11']"
],
"pages_sent": 14,
"cost_usd": 0.09,
"at": "2026-10-31T00:09:22"
},
"datasheet": {
"url": "https://www.analog.com/media/en/technical-documentation/data-sheets/max3224e-max3245e.pdf",
"pages": 25,
"sha256": "8542587c6f3a36a5",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 16,
"described": 16,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "max3227ecae-t.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
7.8,
6.2,
2.1
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "d0e11e46aeca5dbaa5c4bb538f3f4899761267cabdeba6486325ae9e979c03ef",
"checked": "2026-10-31",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "max3227ecae-t-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
7.8,
6.2,
2.1
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "86cdbaedf4862a106c232bb4eea74ad1ad35a6c89acab357a727ca02b8c7a20f",
"checked": "2026-10-31",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}