main
History Download
Ray Publish 0.1.0 85374c2

MAX3222ECDBR

Texas Instruments · RS232 ICs · SSOP-20-208mil

MAX3222ECDBR from Texas Instruments, in a SSOP-20-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN input Receiver enable, active low: a high level places the receiver outputs (ROUT) in high impedance, and the input accepts 0 V to 5.5 V.
2 C1+ passive Charge pump capacitor pin; the test condition for C1 is 0.1 µF at VCC = 3.3 V or 0.047 µF at VCC = 5 V.
3 V+ power_in Charge pump capacitor pin; during power-down V+ is lowered to VCC.
4 C1- passive Charge pump capacitor pin; the test condition for C1 is 0.1 µF at VCC = 3.3 V or 0.047 µF at VCC = 5 V.
5 C2+ passive Charge pump capacitor pin; C2 to C4 are 0.1 µF at VCC = 3.3 V or 0.33 µF at VCC = 5 V per the test conditions.
6 C2- passive Charge pump capacitor pin; C2 to C4 are 0.1 µF at VCC = 3.3 V or 0.33 µF at VCC = 5 V per the test conditions.
7 V- power_in Charge pump capacitor pin; during power-down V- is raised to GND.
8 DOUT2 output RS-232 driver output with an absolute maximum output voltage of ±13.2 V and a short-circuit current of ±60 mA typical.
9 RIN2 input RS-232 receiver input rated for ±25 V, with input resistance of 3 kΩ min, 5 kΩ typ and 7 kΩ max.
10 ROUT2 output Receiver logic output with VOH of at least VCC - 0.6 V at IOH = -1 mA and VOL of at most 0.4 V at IOL = 1.6 mA.
11 NC unconnected No internal connection.
12 DIN2 input Driver logic input with VIH of 2 V min at VCC = 3.3 V (2.4 V at 5 V), VIL of 0.8 V max, and an input range of 0 V to 5.5 V.
13 DIN1 input Driver logic input with VIH of 2 V min at VCC = 3.3 V (2.4 V at 5 V), VIL of 0.8 V max, and an input range of 0 V to 5.5 V.
14 NC unconnected No internal connection.
15 ROUT1 output Receiver logic output with VOH of at least VCC - 0.6 V at IOH = -1 mA and VOL of at most 0.4 V at IOL = 1.6 mA.
16 RIN1 input RS-232 receiver input rated for ±25 V, with input resistance of 3 kΩ min, 5 kΩ typ and 7 kΩ max.
17 DOUT1 output RS-232 driver output with an absolute maximum output voltage of ±13.2 V and a short-circuit current of ±60 mA typical.
18 GND power_in Network ground; all device voltages are referenced to this pin.
19 VCC power_in Power supply: 3 V to 3.6 V for 3.3 V operation or 4.5 V to 5.5 V for 5 V operation, with a minimum 1 µF capacitor between VCC and GND required for the IEC 61000-4-2 rating on the DB package.
20 PWRDOWN input Driver disable, active low: a low level disables the drivers (high impedance) and reduces supply current to 1 µA typical, and the input accepts 0 V to 5.5 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SSOP-20-208mil
Category Interface
Pins 20

CAD (KiCad official)

  • Symbol: MAX3222ECDBR
  • Footprint: Package_SO:SSOP-20_5.3x7.2mm_P0.65mm
  • 3D model: SSOP-20-208mil (KiCad packages3D, STEP)
  • 3D model files: max3222ecdbr-etched.step / max3222ecdbr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max3222ecdbr.step / max3222ecdbr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (30 pp, sha256 9bb8929282ac1c04, retrieved 2026-10-12, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF