Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MAX3221EETE+

Maxim Integrated · RS232 ICs · TQFN-16(5x5)

MAX3221EETE+ from Maxim Integrated, in a TQFN-16(5x5). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 C1- passive Negative terminal of the voltage doubler charge-pump capacitor.
2 C2+ passive Positive terminal of the inverting charge-pump capacitor.
3 C2- passive Negative terminal of the inverting charge-pump capacitor.
4 V- power_out -5.5V generated by the charge pump.
5 R1IN input RS-232 receiver input, protected to ±15kV ESD and with an input voltage range of -25V to +25V.
6 R1OUT tri_state TTL/CMOS receiver output that goes high-impedance when EN is driven high.
7 INVALID output Output of the valid signal detector, enabled high if a valid RS-232 level is present on any receiver input.
8 T1IN input TTL/CMOS transmitter input with no pull-up resistor.
9 FORCEON input Drive high to override the automatic circuitry that keeps the transmitters and charge pump on (FORCEOFF must be high).
10 T1OUT output RS-232 transmitter output, protected to ±15kV ESD, high-impedance when shut down and able to be driven to ±12V in that state.
11 GND power_in Ground.
12 VCC power_in +3.0V to +5.5V supply voltage.
13 FORCEOFF input Active-low force-off input that, when driven low, shuts down the transmitters and the on-board charge pump, overriding all automatic circuitry and FORCEON.
14 EN input Receiver enable control: drive low for normal operation, drive high to force the receiver output (R1OUT) into a high-impedance state.
15 V+ power_out +5.5V generated by the charge pump.
16 C1+ passive Positive terminal of the voltage doubler charge-pump capacitor.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Maxim Integrated
Package TQFN-16(5x5)
Category Communication Interface Chip/UART/485/232
Pins 17

CAD (KiCad official)

  • Symbol: MAX3221EETE+
  • Footprint: Package_DFN_QFN:QFN-16-1EP_5x5mm_P0.8mm_EP2.7x2.7mm
  • 3D model: TQFN-16(5x5) (KiCad packages3D, STEP)
  • 3D model files: max3221eete-etched.step / max3221eete-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max3221eete.step / max3221eete.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Maxim Integrated datasheet (19 pp, sha256 05825bd0ffbc0555, retrieved 2026-11-21)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF