Generated by kicad-footprint-generator · KiCad file format 20260206
MAX31911AUI+T
Analog Devices Inc./Maxim Integrated · Serializers, Deserializers · TSSOP-28-EP
MAX31911AUI+T from Analog Devices Inc./Maxim Integrated, in a TSSOP-28-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DB0 | input | Debounce (filtering) time select input; together with DB1 it selects the glitch-filter time from 0 to 3ms per Table 1. |
| 2 | DB1 | input | Debounce (filtering) time select input; together with DB0 it selects the glitch-filter time from 0 to 3ms per Table 1. |
| 3 | IN1 | input | Field input for sensor 1 with an input voltage range of -0.3V to 36V, current limited by RIREF, and used with a 2.2kΩ series resistor. |
| 4 | RT1 | passive | Must be connected directly to GND to provide the return path for the input current; reserved for energy-less LED drive in future versions. |
| 5 | IN2 | input | Field input for sensor 2 with an input voltage range of -0.3V to 36V, current limited by RIREF, and used with a 2.2kΩ series resistor. |
| 6 | RT2 | passive | Must be connected directly to GND to provide the return path for the input current; reserved for energy-less LED drive in future versions. |
| 7 | IN3 | input | Field input for sensor 3 with an input voltage range of -0.3V to 36V, current limited by RIREF, and used with a 2.2kΩ series resistor. |
| 8 | RT3 | passive | Must be connected directly to GND to provide the return path for the input current; reserved for energy-less LED drive in future versions. |
| 9 | IN4 | input | Field input for sensor 4 with an input voltage range of -0.3V to 36V, current limited by RIREF, and used with a 2.2kΩ series resistor. |
| 10 | RT4 | passive | Must be connected directly to GND to provide the return path for the input current; reserved for energy-less LED drive in future versions. |
| 11 | IN5 | input | Field input for sensor 5 with an input voltage range of -0.3V to 36V, current limited by RIREF, and used with a 2.2kΩ series resistor. |
| 12 | RT5 | passive | Must be connected directly to GND to provide the return path for the input current; reserved for energy-less LED drive in future versions. |
| 13 | RIREF | passive | Current-limiter reference resistor connected between this pin and GND; sets the input current limit adjustable from 0.5mA to 6mA. |
| 14 | VCC24V | power_in | Field-supply voltage input with a wide operating range of 7V to 36V. |
| 15 | 5VOUT | power_out | 5V regulator output (4.75V to 5.25V) that can supply up to 50mA to external optocouplers, digital isolators, or other 5V circuitry. |
| 16 | FAULT | output | Open-drain active-low output asserted for overtemperature or field-supply undervoltage conditions, with VOL of 1.0V max at IOL = 4mA. |
| 17 | RT6 | passive | Must be connected directly to GND to provide the return path for the input current; reserved for energy-less LED drive in future versions. |
| 18 | IN6 | input | Field input for sensor 6 with an input voltage range of -0.3V to 36V, current limited by RIREF, and used with a 2.2kΩ series resistor. |
| 19 | RT7 | passive | Must be connected directly to GND to provide the return path for the input current; reserved for energy-less LED drive in future versions. |
| 20 | IN7 | input | Field input for sensor 7 with an input voltage range of -0.3V to 36V, current limited by RIREF, and used with a 2.2kΩ series resistor. |
| 21 | RT8 | passive | Must be connected directly to GND to provide the return path for the input current; reserved for energy-less LED drive in future versions. |
| 22 | IN8 | input | Field input for sensor 8 with an input voltage range of -0.3V to 36V, current limited by RIREF, and used with a 2.2kΩ series resistor. |
| 23 | SOUT | tri_state | Serial data output using SPI timing with MSB first; it is high impedance when CS is high. |
| 24 | CS | input | Active-low chip-select input that latches the input states on its falling edge and starts the serial output; CS pulse duration minimum is 20ns. |
| 25 | CLK | input | Serial clock input; data is shifted out on its falling edge, with a maximum clock frequency of 25MHz. |
| 26 | MODESEL | input | Mode-select input: MODESEL = 1 selects the 8-bit shift register (IN8-IN1 only), MODESEL = 0 selects the 16-bit shift register with CRC, UV and OT bits. |
| 27 | SIN | input | Serial data input used to daisy-chain the SOUT of another device, with 5ns setup and 8ns hold to CLK. |
| 28 | GND | power_in | Field ground and device ground reference for the part. |
| 29 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc./Maxim Integrated |
| Package | TSSOP-28-EP |
| Category | Interface |
| Pins | 29 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Field Supply Voltage | VCC24V | 7 | 36 | V | 3 | ||
| Field Inputs Voltage | VINn | -0.3 | 36 | V | Note 3 | 3 | |
| Logic Inputs Voltage | VLOGIC | 0 | 5.5 | V | 3 | ||
| Field Input Data Rate | fIN | 200 | kHz | Note 4 | 3 | ||
| Voltage Range on VCC24V | -0.3 | 45 | V | Voltages relative to GND | 3 | ||
| Voltage Range on IN1-IN8 | -0.3 | 45 | V | Voltages relative to GND | 3 | ||
| Voltage Range on IN1-IN8 (through 2.2kΩ resistors) | -45 | 45 | V | Voltages relative to GND; through 2.2kΩ resistors | 3 | ||
| Voltage Range on DB0/DB1, CLK, SIN, CS, MODESEL | -0.3 | V | Voltages relative to GND; max printed as (V5VOUT + 0.3V) | 3 | |||
| Continuous Power Dissipation | 2162.2 | mW | TA = +70°C, TSSOP, derate 27mW/°C above +70°C | 3 | |||
| Operating Temperature Range, Ambient | -40 | 125 | °C | 3 | |||
| Operating Temperature Range, Junction | -40 | 150 | °C | 3 | |||
| Storage Temperature Range | -55 | 125 | °C | 3 | |||
| Lead Temperature (soldering) | 300 | °C | 10 s soldering | 3 | |||
| Soldering Temperature (reflow) | 260 | °C | 3 | ||||
| Field-Supply UVLO Off/On | VONUVLO | 9 | 10 | V | 4 | ||
| Field-Supply UVLO On/Off | VOFFUVLO | 7 | 8 | V | 4 | ||
| Field Input Threshold High-to-Low | VIN-(INF) | 6 | 7.5 | V | 2.2kΩ external series resistor | 4 | |
| Field Input Threshold Low-to-High | VIN+(INF) | 8.5 | 10 | V | 2.2kΩ external series resistor | 4 | |
| Field Input Hysteresis | VHYS(INF) | 1 | V | 2.2kΩ external series resistor | 4 | ||
| Input Threshold High-to-Low (at IC pin) | VTH-(INP) | 2 | 2.5 | V | 4 | ||
| Input Threshold Low-to-High (at IC pin) | VTH+(INP) | 3.5 | 4 | V | 4 | ||
| Input Threshold Hysteresis (at IC pin) | VHYS(INP) | 1 | V | 4 | |||
| Field-Supply Current | ICC24V | 1.4 | 2 | mA | IN1-IN8 = 24V, 5VOUT = open, RT1-RT8 = GND, all logic inputs open | 4 | |
| Field Input Current Limit | IINLIM | 2.2 | 2.4 | 2.6 | mA | RREF = 15kΩ, VCC24V = 18V to 30V (Note 5) | 4 |
| Filter Time Constant | tFILTER | 0.008 | 0.025 | 0.038 | ms | DB1/DB0 = 0/1 | 4 |
| Filter Time Constant | tFILTER | 0.25 | 0.75 | 1.1 | ms | DB1/DB0 = 1/0 | 4 |
| Filter Time Constant | tFILTER | 1 | 3 | 4.5 | ms | DB1/DB0 = 1/1 | 4 |
| Linear Regulator Output | V5VOUT | 4.75 | 5 | 5.25 | V | Max ILOAD = 50mA | 4 |
| Regulator Line Regulation | dVREGLINE | 10 | 20 | mV | ILOAD = 50mA | 4 | |
| Regulator Load Regulation | dVREGLOAD | 20 | 50 | mV | ILOAD = 1mA to 50mA | 4 | |
| Logic-Low Output Voltage | VOL | 0.4 | 1 | V | IOL = 4mA | 4 | |
| Logic-High Output Voltage | VOH | 4 | V | IOH = -4mA | 4 | ||
| Logic-Input Trip Point | VIH-IL | 0.3 | 0.5 | 0.7 | x V5VOUT | 4 | |
| Logic-Input Leakage Current | IIL | -50 | -30 | -15 | µA | 4 | |
| CLK Pulse Duration | tCLKPW | 20 | ns | Note 6 | 5 | ||
| CS Pulse Duration | tCSPW | 20 | ns | Note 7 | 5 | ||
| SIN to CLK Setup Time | tSU1 | 5 | ns | Note 8 | 5 | ||
| SIN to CLK Hold Time | tH1 | 8 | ns | Note 8 | 5 | ||
| CS to CLK Setup Time | tSU2 | 8 | ns | Note 9 | 5 | ||
| CS to CLK Recovery Time | tREC | 12 | ns | Note 9 | 5 | ||
| Clock Pulse Frequency | fCLK | 25 | MHz | Notes 6, 10 | 5 | ||
| Propagation Delay, CLK to SOUT | tP1 | 20 | ns | Note 6 | 5 | ||
| Propagation Delay, CS to SOUT | tP2 | 20 | ns | Note 7 | 5 | ||
| Rise/Fall Time SOUT/FAULT | tR/F | 40 | ns | Note 6 | 5 | ||
| Field Input Pulse Width | tPW | 1 | µs | No external capacitors on pins IN1-IN8 | 5 | ||
| ESD HBM, all pins except IN1-IN8 | -2 | 2 | kV | HBM, all pins except IN1-IN8 | 5 | ||
| ESD HBM, IN1-IN8 with respect to GND | -15 | 15 | HBM, IN1-IN8 with respect to GND | 5 | |||
| Current-Limit Setting Resistor | RREF | 15 | kΩ | 3 | |||
| Junction-to-Case Thermal Resistance | θJC | 2 | °C/W | TSSOP package | 3 | ||
| Filter Time Constant | tFILTER | 0 | ms | DB1/DB0 = 0/0: no filtering | 4 | ||
| Field Input Pin Resistance | RINP | 0.8 | kΩ | 4 | |||
| Overtemperature Alarm | TALRM | 135 | °C | 4 |
CAD (KiCad official)
- Symbol:
MAX31911AUI+T - Footprint:
Package_SO:TSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.85x6.7mm - 3D model: TSSOP-28-EP (KiCad packages3D, STEP)
- 3D model files:
max31911aui-t-etched.step/max31911aui-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max31911aui-t.step/max31911aui-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc./Maxim Integrated datasheet (17 pp, sha256
4c3cfd041f853f3e, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).