component
MAX3180EUK+T
Public Made by Adomby adom
Maxim Integrated Pre-ordered Chips, SOT-23-5. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMAX3180EUK+T
Maxim Integrated · Pre-ordered Chips · SOT-23-5
MAX3180EUK+T from Maxim Integrated, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN | input | Receiver output enable logic input: drive high to force ROUT into high-impedance state, drive low for normal operation (VIH 2.0V min to 2.4V, VIL 0.8V max). |
| 2 | GND | power_in | Ground. |
| 3 | ROUT | tri_state | Inverting three-state TTL/CMOS receiver output, limited to -0.3V to (VCC + 0.3V) with high-impedance when EN is high. |
| 4 | RIN | input | RS-232 receiver input with 5k nominal input resistance (3k to 7k) and a ±25V input voltage range. |
| 5 | VCC | power_in | Supply voltage input, +3.0V to +5.5V (absolute maximum +6V), bypassed with a 0.1µF capacitor placed close to the IC. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Maxim Integrated |
| Package | SOT-23-5 |
| Category | Interface ICs |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VCC | 3 | 5.5 | V | 2 | ||
| Input Voltage Range | VRIN | -25 | 25 | V | 2 | ||
| Supply Current | ICC | 0.5 | 5 | µA | VCC = 3.3V or 5V, RIN = VCC or GND, no load | 2 | |
| Input Threshold Low | VITL | 0.8 | 1.5 | V | VCC = 5.0V | 2 | |
| Input Threshold Low | VITL | 0.6 | 1.2 | V | VCC = 3.3V | 2 | |
| Input Threshold High | VITH | 1.8 | 2.7 | V | VCC = 5.0V | 2 | |
| Input Threshold High | VITH | 1.5 | 2.4 | V | VCC = 3.3V | 2 | |
| Input Resistance | RRIN | 3 | 5 | 7 | kΩ | 2 | |
| Logic Threshold Low | VIL | 0.8 | V | 2 | |||
| Logic Threshold High | VIH | 2 | V | VCC = 3.3V | 2 | ||
| Logic Threshold High | VIH | 2.4 | V | VCC = 5.0V | 2 | ||
| Leakage Current | IEN | -1 | 0.01 | 1 | µA | 2 | |
| Output Voltage Low | VOL | 0.4 | V | ISINK = 1.6mA | 2 | ||
| Output Leakage Current | IROUT | -10 | 0.05 | 10 | µA | Receiver disabled | 2 |
| Receiver Output Enable Time | tROE | 200 | ns | CL = 50pF | 3 | ||
| Receiver Output Disable Time | tROD | 200 | ns | 3 | |||
| Maximum Data Rate | 1.5 | Mbps | 3 | ||||
| Receiver Skew | tRS | 50 | ns | / tPHL - tPLH /, Figure 1 | 3 | ||
| Input Hysteresis | VHYST | 300 | mV | 2 | |||
| Receiver Propagation Delay, High-to-Low | tPHL | 0.15 | µs | RIN to ROUT; CL = 150pF | 3 | ||
| Receiver Propagation Delay, Low-to-High | tPLH | 0.15 | µs | RIN to ROUT; CL = 150pF | 3 | ||
| VCC to GND | VCC | -0.3 | 6 | V | 2 | ||
| RIN to GND | RIN | -25 | 25 | V | 2 | ||
| EN, ROUT to GND | -0.3 | V | upper limit (VCC + 0.3V) | 2 | |||
| Operating Temperature Range | -40 | 85 | °C | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature | 300 | °C | soldering, 10sec | 2 |
CAD (KiCad official)
- Symbol:
MAX3180EUK+T - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
max3180euk-t-etched.step/max3180euk-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max3180euk-t.step/max3180euk-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Maxim Integrated datasheet (6 pp, sha256
64b4f0d6e253f6d2, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).