# MAX3096ESE+T

**Analog Devices Inc Maxim Integrated** · RS-485 / RS-422 ICs · SOIC-16

MAX3096ESE+T from Analog Devices Inc Maxim Integrated, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | B1 | input | Inverting receiver input for channel 1; receiver inputs are rated ±25V absolute maximum and protected to ±15kV HBM and IEC 1000-4-2 air-gap. |
| 2 | A1 | input | Noninverting receiver input for channel 1; receiver inputs are rated ±25V absolute maximum and protected to ±15kV HBM and IEC 1000-4-2 air-gap. |
| 3 | Y1 | output | Receiver output for channel 1: logic-high if VA1 is more than 200mV above VB1 and low if VA1 is more than 200mV below VB1, going high impedance when G is low and G is high. |
| 4 | G | input | Active-high receiver output enable; a logic-high enables all receivers, and when taken low (with G high) all receivers shut down with outputs high impedance. |
| 5 | Y2 | output | Receiver output for channel 2 with the same functionality as Y1; high impedance in shutdown. |
| 6 | A2 | input | Noninverting receiver input for channel 2; receiver inputs are rated ±25V absolute maximum. |
| 7 | B2 | input | Inverting receiver input for channel 2; receiver inputs are rated ±25V absolute maximum. |
| 8 | GND | power_in | Ground reference for the device; all voltages are referred to device ground. |
| 9 | B3 | input | Inverting receiver input for channel 3; receiver inputs are rated ±25V absolute maximum. |
| 10 | A3 | input | Noninverting receiver input for channel 3; receiver inputs are rated ±25V absolute maximum. |
| 11 | Y3 | output | Receiver output for channel 3 with the same functionality as Y1; high impedance in shutdown. |
| 12 | G | input | Active-low receiver output enable (overbar lost in text extraction); a logic-low enables all receivers, and when G is high and this input is low, all receivers shut down with outputs high impedance. |
| 13 | Y4 | output | Receiver output for channel 4 with the same functionality as Y1; high impedance in shutdown. |
| 14 | A4 | input | Noninverting receiver input for channel 4; receiver inputs are rated ±25V absolute maximum. |
| 15 | B4 | input | Inverting receiver input for channel 4; receiver inputs are rated ±25V absolute maximum. |
| 16 | VCC | power_in | Positive supply; 3.135V to 3.6V for the MAX3096 (3.3V nominal), with a 7V absolute maximum supply rating. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | SOIC-16 |
| Category | Interface |
| Pins | 16 |

## Electrical characteristics

Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).

| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VCC (MAX3096 operating range) | VCC | 3.135 | 3.3 | 3.6 | V | VCC = 3.135V to 3.6V; typ at VCC = 3.3V, TA = +25°C | 3 |
| Receiver Differential Input Threshold | VTH | -200 |  | 200 | mV | -7V ≤ VCM ≤ 12V | 3 |
| Receiver Input Hysteresis |  |  | 45 |  | mV | VCM = 0V | 3 |
| Receiver Input Current (A_, B_) | IIN |  |  | 250 | µA | VCC = 0V or 3.6V, VIN = 12V | 3 |
| Receiver Input Current (A_, B_) | IIN | -200 |  |  | µA | VCC = 0V or 3.6V, VIN = -7V | 3 |
| Enable Input Current (G, G) |  | -1 |  | 1 | µA |  | 3 |
| Enable Input High Voltage (G, G) | VIH | 2 |  |  | V |  | 3 |
| Enable Input Low Voltage (G, G) | VIL |  |  | 0.8 | V |  | 3 |
| Receiver Output Low Voltage | VOL |  |  | 0.4 | V | IOUT = 2.5mA, VID = -200mV, G = VCC or G = GND, Figure 1 | 3 |
| Three-State Current at Receiver Output | IOZR | -1 |  | 1 | µA | 0 ≤ VOUT ≤ VCC, G = GND and G = VCC | 3 |
| Output Short-Circuit Current | IOSR | 4 |  | 60 | mA | 0 ≤ VOUT ≤ VCC, G = VCC or G = GND | 3 |
| Receiver Input Resistance | RIN | 48 |  |  | kΩ | -7V ≤ VCM ≤ 12V | 3 |
| Supply Current | ICC |  | 2.4 | 4 | mA | No load, G = VCC or G = GND | 4 |
| Supply Current (shutdown) | ICC |  | 0.001 | 10 | µA | G = GND and G = VCC | 4 |
| Input-to-Output Propagation Delay | tPLH, tPHL | 69 |  | 127 | ns | /VID/ = 3V, Figure 2; VCC = 3.135V to 3.6V, TA = TMIN to TMAX | 4 |
| Input-to-Output Propagation Delay | tPLH, tPHL | 88 | 98 | 112 | ns | /VID/ = 3V, Figure 2; VCC = 3.60V, TA = +85°C | 4 |
| Input-to-Output Propagation Delay | tPLH, tPHL | 78 | 88 | 102 | ns | /VID/ = 3V, Figure 2; VCC = 3.60V, TA = +25°C | 4 |
| Input-to-Output Propagation Delay | tPLH, tPHL | 69 | 79 | 93 | ns | /VID/ = 3V, Figure 2; VCC = 3.60V, TA = -40°C | 4 |
| Input-to-Output Propagation Delay | tPLH, tPHL | 103 | 113 | 127 | ns | /VID/ = 3V, Figure 2; VCC = 3.135V, TA = +85°C | 4 |
| Input-to-Output Propagation Delay | tPLH, tPHL | 91 | 101 | 115 | ns | /VID/ = 3V, Figure 2; VCC = 3.135V, TA = +25°C | 4 |
| Input-to-Output Propagation Delay | tPLH, tPHL | 82 | 92 | 106 | ns | /VID/ = 3V, Figure 2; VCC = 3.135V, TA = -40°C | 4 |
| Device-to-Device Propagation-Delay Matching |  |  |  | 24 | ns | /VID/ = 3V, Figure 2, matched conditions | 4 |
| Propagation-Delay Skew (tPLH - tPHL) | tSK | -10 | -2 | 10 | ns |  | 4 |
| Output Enable Time to Low Level | tZL |  | 600 | 1000 | ns | Figure 3 | 4 |
| Output Enable Time to High Level | tZH |  | 600 | 1000 | ns | Figure 3 | 4 |
| Output Disable Time from Low Level | tLZ |  | 80 | 180 | ns | Figure 3 | 4 |
| Output Disable Time from High Level | tHZ |  | 80 | 180 | ns | Figure 3 | 4 |
| Maximum Data Rate | fMAX | 10 |  |  | Mbps |  | 4 |
| ESD Human Body Model (receiver inputs) |  | -15 |  | 15 | kV | Receiver inputs (A_, B_), Note 2 | 4 |
| ESD IEC 1000-4-2 Air-Gap Discharge (receiver inputs) |  | -15 |  | 15 | kV | Receiver inputs (A_, B_), Note 2 | 4 |
| ESD IEC 1000-4-2 Contact Discharge (receiver inputs) |  | -8 |  | 8 | kV | Receiver inputs (A_, B_), Note 2 | 4 |
| Supply Voltage (VCC) | VCC |  |  | 7 | V |  | 2 |
| Control Input Voltage (G, G); max printed as VCC + 0.3V |  | -0.3 |  |  | V |  | 2 |
| Receiver Input Voltage (A_, B_) |  | -25 |  | 25 | V |  | 2 |
| Receiver Output Voltage (Y_); max printed as VCC + 0.3V |  | -0.3 |  |  | V |  | 2 |
| Operating Temperature Range (MAX309_E) | TA | -40 |  | 85 | °C | E-grade part | 2 |
| Storage Temperature Range | TSTG | -65 |  | 160 | °C |  | 2 |
| Lead Temperature (soldering, 10s) |  |  |  | 300 | °C | 10s soldering | 2 |
| Maximum Junction Temperature | TJ |  |  | 150 | °C |  | 2 |

## CAD (KiCad official)

- Symbol: `MAX3096ESE+T`
- Footprint: `Package_SO:SOIC-16_3.9x9.9mm_P1.27mm`
- 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files: `max3096ese-t-etched.step` / `max3096ese-t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max3096ese-t.step` / `max3096ese-t.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Analog Devices Inc Maxim Integrated datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8603134594178686976) (13 pp, sha256 `229e5d7dfc3dfc30`, retrieved 2026-10-18, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/max3096ese-t-datasheet.pdf)