component
MAX3095CSE+T
Public Made by Adomby adom
Analog Devices Inc Maxim Integrated RS-485 / RS-422 ICs, SO-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMAX3095CSE+T
Analog Devices Inc Maxim Integrated · RS-485 / RS-422 ICs · SO-16
MAX3095CSE+T from Analog Devices Inc Maxim Integrated, in a SO-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | B1 | input | Inverting receiver input for channel 1; the receiver differential threshold is ±200mV over a common-mode range of -7V to +12V. |
| 2 | A1 | input | Noninverting receiver input for channel 1; the receiver differential threshold is ±200mV over a common-mode range of -7V to +12V. |
| 3 | Y1 | output | Receiver output for channel 1, enabled when G is high or G̅ is low; it is high when VA1 - VB1 is at least 200mV, low when it is at most -200mV, and high impedance in shutdown. |
| 4 | G | input | Active-high receiver output enable; a logic-high enables all receivers, and when low with G̅ high all receivers shut down and outputs go high impedance. |
| 5 | Y2 | output | Receiver output for channel 2, with the same functionality as Y1. |
| 6 | A2 | input | Noninverting receiver input for channel 2; the receiver differential threshold is ±200mV over a common-mode range of -7V to +12V. |
| 7 | B2 | input | Inverting receiver input for channel 2; the receiver differential threshold is ±200mV over a common-mode range of -7V to +12V. |
| 8 | GND | power_in | Device ground; all voltages are referred to device ground. |
| 9 | B3 | input | Inverting receiver input for channel 3; the receiver differential threshold is ±200mV over a common-mode range of -7V to +12V. |
| 10 | A3 | input | Noninverting receiver input for channel 3; the receiver differential threshold is ±200mV over a common-mode range of -7V to +12V. |
| 11 | Y3 | output | Receiver output for channel 3, with the same functionality as Y1. |
| 12 | G̅ | input | Active-low receiver output enable; a logic-low enables all receivers, and when G̅ is low with G high all receivers shut down and outputs go high impedance. |
| 13 | Y4 | output | Receiver output for channel 4, with the same functionality as Y1. |
| 14 | A4 | input | Noninverting receiver input for channel 4; the receiver differential threshold is ±200mV over a common-mode range of -7V to +12V. |
| 15 | B4 | input | Inverting receiver input for channel 4; the receiver differential threshold is ±200mV over a common-mode range of -7V to +12V. |
| 16 | VCC | power_in | Positive supply: 5V ±5% for the MAX3095 (CSE variant) and 3.135V to 3.6V for the MAX3096; the MAX3095CSE+ uses the 5V range. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | SO-16 |
| Category | Interface |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage tolerance (VCC = 5V ±5%) | VCC | -5 | 5 | % | VCC = 5V ±5% (MAX3095) | 2 | |
| Supply Voltage | VCC | 7 | V | 2 | |||
| Control Input Voltage (G, G̅) | -0.3 | V | Maximum printed as (VCC + 0.3V) | 2 | |||
| Receiver Input Voltage (A_, B_) | -25 | 25 | V | 2 | |||
| Receiver Output Voltage (Y_) | -0.3 | V | Maximum printed as (VCC + 0.3V) | 2 | |||
| Operating Temperature Range, MAX309_C_ _ | 0 | 70 | °C | MAX309_C_ _ (commercial grade, applies to MAX3095CSE+) | 2 | ||
| Storage Temperature Range | -65 | 160 | °C | 2 | |||
| Lead Temperature (soldering) | 300 | °C | soldering, 10s | 2 | |||
| Maximum Junction Temperature | 150 | °C | 2 | ||||
| Receiver Differential Input Threshold | VTH | -200 | 200 | mV | -7V ≤ VCM ≤ 12V | 2 | |
| Receiver Input Current (A_, B_), VIN = 12V | IIN | 250 | µA | VCC = 0V or 5.25V, VIN = 12V | 2 | ||
| Receiver Input Current (A_, B_), VIN = -7V | IIN | -200 | µA | VCC = 0V or 5.25V, VIN = -7V | 2 | ||
| Enable Input Current (G, G̅) | -1 | 1 | µA | 2 | |||
| Enable Input High Voltage (G, G̅) | VIH | 2 | V | 2 | |||
| Enable Input Low Voltage (G, G̅) | VIL | 0.8 | V | 2 | |||
| Receiver Output Low Voltage | VOL | 0.4 | V | IOUT = 4mA, VID = -200mV, G = VCC or G = GND, Figure 1 | 2 | ||
| Three-State Current at Receiver Output | IOZR | -1 | 1 | µA | 0 ≤ VOUT ≤ VCC, G = GND and G = VCC | 2 | |
| Output Short-Circuit Current | IOSR | -7 | 75 | mA | 0 ≤ VOUT ≤ VCC, G = VCC or G = GND | 2 | |
| Receiver Input Resistance | RIN | 48 | kΩ | -7V ≤ VCM ≤ 12V | 2 | ||
| Supply Current | ICC | 2.4 | 3.5 | mA | No load, G = VCC or G = GND | 2 | |
| Supply Current (shutdown) | ICC | 0.001 | 10 | µA | G = GND and G = VCC | 2 | |
| ESD Protection, Human Body Model | -15 | 15 | kV | Receiver inputs (A_, B_), Human Body Model | 2 | ||
| ESD Protection, IEC 1000-4-2 Air-Gap Discharge | -15 | 15 | kV | Receiver inputs (A_, B_), IEC 1000-4-2 (Air-Gap Discharge) | 2 | ||
| ESD Protection, IEC 1000-4-2 Contact Discharge | -8 | 8 | kV | Receiver inputs (A_, B_), IEC 1000-4-2 (Contact Discharge) | 2 | ||
| Input-to-Output Propagation Delay | tPLH, tPHL | 65 | 98 | ns | VCC = 5V ±5%, TA = TMIN to TMAX, /VID/ = 3V, Figure 2 | 3 | |
| Input-to-Output Propagation Delay | tPLH, tPHL | 78 | 86 | 94 | ns | VCC = 5.25V, TA = +85°C, /VID/ = 3V, Figure 2 | 3 |
| Input-to-Output Propagation Delay | tPLH, tPHL | 71 | 79 | 87 | ns | VCC = 5.25V, TA = +25°C, /VID/ = 3V, Figure 2 | 3 |
| Input-to-Output Propagation Delay | tPLH, tPHL | 65 | 73 | 81 | ns | VCC = 5.25V, TA = -40°C, /VID/ = 3V, Figure 2 | 3 |
| Input-to-Output Propagation Delay | tPLH, tPHL | 82 | 90 | 98 | ns | VCC = 4.75V, TA = +85°C, /VID/ = 3V, Figure 2 | 3 |
| Input-to-Output Propagation Delay | tPLH, tPHL | 74 | 82 | 90 | ns | VCC = 4.75V, TA = +25°C, /VID/ = 3V, Figure 2 | 3 |
| Input-to-Output Propagation Delay | tPLH, tPHL | 68 | 76 | 84 | ns | VCC = 4.75V, TA = -40°C, /VID/ = 3V, Figure 2 | 3 |
| Device-to-Device Propagation-Delay Matching | 16 | ns | /VID/ = 3V, Figure 2, matched conditions | 3 | |||
| Propagation-Delay Skew (tPLH - tPHL) | tSK | -10 | -4 | 10 | ns | 3 | |
| Output Enable Time to Low Level | tZL | 600 | 800 | ns | Figure 3 | 3 | |
| Output Enable Time to High Level | tZH | 600 | 800 | ns | Figure 3 | 3 | |
| Output Disable Time from Low Level | tLZ | 60 | 100 | ns | Figure 3 | 3 | |
| Output Disable Time from High Level | tHZ | 60 | 100 | ns | Figure 3 | 3 | |
| Maximum Data Rate | fMAX | 10 | Mbps | 3 | |||
| Receiver Input Hysteresis | 45 | mV | VCM = 0V | 2 |
CAD (KiCad official)
- Symbol:
MAX3095CSE+T - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SO-16 (KiCad packages3D, STEP)
- 3D model files:
max3095cse-t-etched.step/max3095cse-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max3095cse-t.step/max3095cse-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc Maxim Integrated datasheet (13 pp, sha256
229e5d7dfc3dfc30, retrieved 2026-10-18, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).