component
MAX308CSE+T
Public Made by Adomby adom
Analog Devices Inc Maxim Integrated Signal Switches, Multiplexers, Decoders, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMAX308CSE+T
Analog Devices Inc Maxim Integrated · Signal Switches, Multiplexers, Decoders · SOIC-16
MAX308CSE+T from Analog Devices Inc Maxim Integrated, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | A0 | input | Address input A0 selects the active channel and is TTL/CMOS compatible, with logic 0 at or below 0.8V and logic 1 at or above 2.4V. |
| 2 | EN | input | Enable input turns the selected channel on when high (logic 1 at or above 2.4V); with EN low, no channel is connected. |
| 3 | V- | power_in | Negative supply voltage input for bipolar operation from -5V to -20V; connect V- to GND for single-supply operation from +5V to +30V. |
| 4 | NO1 | bidirectional | Analog input/output channel 1; signals exceeding V+ or V- are clamped by internal diodes. |
| 5 | NO2 | bidirectional | Analog input/output channel 2; signals exceeding V+ or V- are clamped by internal diodes. |
| 6 | NO3 | bidirectional | Analog input/output channel 3; signals exceeding V+ or V- are clamped by internal diodes. |
| 7 | NO4 | bidirectional | Analog input/output channel 4; signals exceeding V+ or V- are clamped by internal diodes. |
| 8 | COM | bidirectional | Common analog output that connects to the selected NO channel; the signal range is rail-to-rail between V- and V+. |
| 9 | NO8 | bidirectional | Analog input/output channel 8; signals exceeding V+ or V- are clamped by internal diodes. |
| 10 | NO7 | bidirectional | Analog input/output channel 7; signals exceeding V+ or V- are clamped by internal diodes. |
| 11 | NO6 | bidirectional | Analog input/output channel 6; signals exceeding V+ or V- are clamped by internal diodes. |
| 12 | NO5 | bidirectional | Analog input/output channel 5; signals exceeding V+ or V- are clamped by internal diodes. |
| 13 | V+ | power_in | Positive supply voltage input for +5V to +30V single supply or ±5V to ±20V dual supplies; V+ to V- must not exceed 44V. |
| 14 | GND | power_in | Ground reference pin, with the device specified at GND = 0V. |
| 15 | A2 | input | Address input A2 selects the active channel and is TTL/CMOS compatible, with logic 0 at or below 0.8V and logic 1 at or above 2.4V. |
| 16 | A1 | input | Address input A1 selects the active channel and is TTL/CMOS compatible, with logic 0 at or below 0.8V and logic 1 at or above 2.4V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | SOIC-16 |
| Category | Logic |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Power-Supply Range (dual supplies, magnitude) | 5 | 20 | V | 3 | |||
| Analog Signal Range (dual supplies) | VNO, VCOM | -15 | 15 | V | 2 | ||
| Analog Signal Range (single supply) | VNO, VCOM | 0 | 12 | V | 4 | ||
| Operating Temperature Range (MAX30_C_ _, MAX308CSE) | 0 | 70 | °C | 1 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature (soldering, 10 s) | 300 | °C | soldering, 10 sec | 2 | |||
| Voltage V+ to V- | V+ - V- | -0.3 | 44 | V | referenced to V- | 2 | |
| Voltage GND | GND | -0.3 | 25 | V | referenced to V- | 2 | |
| Continuous Current (any terminal) | 30 | mA | 2 | ||||
| Peak Current, NO or COM | 100 | mA | pulsed at 1ms, 10% duty cycle max | 2 | |||
| Narrow SO Power Derating | 8.7 | mW/°C | derate above +70°C | 2 | |||
| On-Resistance | RON | 60 | 100 | Ω | INO = -1.0mA, VCOM = ±10V, TA = +25°C | 2 | |
| On-Resistance (TMIN to TMAX) | RON | 125 | Ω | INO = -1.0mA, VCOM = ±10V, TA = TMIN to TMAX | 2 | ||
| On-Resistance (single supply) | RON | 120 | 175 | Ω | INO = -1.0mA, VCOM = 3V or 10V | 4 | |
| On-Resistance Matching Between Channels | ∆RON | 1.5 | 5 | Ω | INO = -1.0mA, VCOM = ±10V, TA = +25°C | 2 | |
| On-Resistance Matching Between Channels (TMIN to TMAX) | ∆RON | 8 | Ω | INO = -1.0mA, VCOM = ±10V, TA = TMIN to TMAX | 2 | ||
| On-Resistance Flatness | RFLAT | 1.8 | 7 | Ω | INO = -1.0mA, VCOM = ±5V or 0V, TA = +25°C | 2 | |
| On-Resistance Flatness (TMIN to TMAX) | RFLAT | 10 | Ω | INO = -1.0mA, VCOM = ±5V or 0V, TA = TMIN to TMAX | 2 | ||
| NO-Off Leakage Current (TMIN to TMAX) | INO(OFF) | -5 | 5 | nA | TA = TMIN to TMAX | 2 | |
| NO-Off Leakage Current | INO(OFF) | -2.5 | 2.5 | nA | TA = +25°C | 2 | |
| Input Current with Input Voltage Low | IAL | -1 | 1 | µA | 3 | ||
| Input Current with Input Voltage High | IAH | -1 | 1 | µA | 3 | ||
| Charge Injection (dual supplies) | Q | 2 | 10 | pC | CL = 1.0nF, VNO = 0V, RS = 0Ω, Figure 5 | 3 | |
| Charge Injection (single supply) | Q | 2 | 10 | pC | CL = 1.0nF, VNO = 0V, RS = 0Ω | 4 | |
| Enable Turn-Off Time (dual supplies, TA = +25°C) | tOFF(EN) | 150 | ns | Figure 3 | 3 | ||
| Enable Turn-Off Time (dual supplies, TMIN to TMAX) | tOFF(EN) | 300 | ns | Figure 3 | 3 | ||
| Enable Turn-On Time (dual supplies, TA = +25°C) | tON(EN) | 85 | 150 | ns | Figure 3 | 3 | |
| Enable Turn-On Time (dual supplies, TMIN to TMAX) | tON(EN) | 225 | ns | Figure 3 | 3 | ||
| Break-Before-Make Interval (dual supplies) | tOPEN | 10 | 40 | ns | Figure 4 | 3 | |
| Transition Time (dual supplies, TA = +25°C) | tTRANS | 85 | 175 | ns | Figure 2 | 3 | |
| Transition Time (dual supplies, TMIN to TMAX) | tTRANS | 250 | ns | Figure 2 | 3 | ||
| Enable Turn-Off Time (single supply) | tOFF(EN) | 75 | 300 | ns | VINH = 2.4V, VINL = 0V, VNO1 = 5V, Figure 3 | 4 | |
| Enable Turn-On Time (single supply) | tON(EN) | 100 | 600 | ns | VINH = 2.4V, VINL = 0V, VNO1 = 5V, Figure 3 | 4 | |
| Transition Time (single supply) | tTRANS | 115 | 450 | ns | VNO1 = 8V, VNO8 = 0V, VIN = 2.4V, Figure 2 | 4 |
CAD (KiCad official)
- Symbol:
MAX308CSE+T - Footprint:
Package_SO:SOIC-16_3.9x9.9mm_P1.27mm - 3D model: SOIC-16 (KiCad packages3D, STEP)
- 3D model files:
max308cse-t-etched.step/max308cse-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max308cse-t.step/max308cse-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc Maxim Integrated datasheet (12 pp, sha256
ff342bfd9b1cfc5c, retrieved 2026-10-20, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).