Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MAX3078EIN

HGSEMI · RS-485 / RS-422 ICs · DIP-8

MAX3078EIN from HGSEMI, in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver output: RO is high when A - B is at least -50mV and low when A - B is at most -200mV, and it is high-impedance when RE is high.
2 RE input Receiver output enable: RO is enabled when RE is low and goes high-impedance when RE is high; RE high with DE low puts the device in low-power shutdown, and RE has a hot-swap input structure.
3 DE input Driver output enable: the driver outputs are active when DE is high and high-impedance when DE is low; DE high with RE high puts the device in low-power shutdown, and DE has a hot-swap input structure.
4 DI input Driver input: with DE high, a low on DI drives A/Y low and B/Z high, and a high on DI drives A/Y high and B/Z low.
5 GND power_in Ground reference for the device.
6 A bidirectional Non-inverting receiver input and non-inverting driver output (A/Y) of the RS-485 bus, rated for the ±16kV IEC 61000-4-2 ESD protection listed in the datasheet.
7 B bidirectional Inverting receiver input and inverting driver output (B/Z) of the RS-485 bus, rated for the ±16kV IEC 61000-4-2 ESD protection listed in the datasheet.
8 VCC power_in Positive supply: 3.15V ≤ VCC ≤ 3.45V, with a 0.1µF capacitor to ground recommended.

Key specifications

Parameter Value
Manufacturer HGSEMI
Package DIP-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC 3.15 3.45 V 3
Supply voltage (absolute maximum) VCC 6 V 3
Control input voltage -0.3 6 V RE, DE 3
Driver input voltage -0.3 6 V DI 3
Driver output voltage -7 12 V A, B, Y, Z 3
Receiver input voltage -7 12 V A, B 3
Receiver output voltage RO -0.3 V 3
Continuous power dissipation, 8-pin plastic DIP 725 mW TA=+70℃ 3
Operating temperature range (industrial, MAX307_I_) -40 85 ℃ MAX307_I_ 3
Storage temperature -65 150 ℃ 3
Lead temperature (soldering) TLEAD 260 ℃ 10 s soldering 3
Differential driver output voltage (RS-422 load) VOD 2 V Figure 1, RL=100Ω (RS-422) 3
Differential driver output voltage (RS-485 load) VOD 1.5 V Figure 1, RL=54Ω (RS-485) 3
Change in magnitude of differential driver output voltage ΔVOD 0.2 V Figure 1, RL=100Ω or RL=54Ω 3
Driver common-mode output voltage VOC 3 V Figure 1, RL=100Ω or RL=54Ω 3
Change in magnitude of common-mode output voltage ΔVOC 0.2 V Figure 1, RL=100Ω or RL=54Ω 3
Input high voltage VIH 2 V DE, DI, RE 4
Input low voltage VIL 0.8 V DE, DI 4
Input current IIN -1 1 μA DE, DI, RE 4
Driver short-circuit output current IOSD 250 mA 0≦VOUT≦12V 4
Driver short-circuit output current IOSD -250 mA -7≦VOUT≦Vcc 4
Driver short-circuit foldback output current IOSDF 20 mA Vcc-1V≦VOUT≦Vcc+0.3.3V 4
Driver short-circuit foldback output current IOSDF -20 mA -0.3.3V≦VOUT≦+1V 4
Receiver differential threshold voltage VTH -200 200 mV -7V≦VCM≦12V 4
Receiver output low voltage VOL 0.4 V IO=4mA, VID=-200mV 4
Receiver tri-state output current IOZR -1 1 μA 0≦VO≦VCC 4
Receiver input resistance RIN 96 kΩ -7V≦VCM≦12V 4
Receiver output short-circuit current IOSR -95 95 mA 0V≦VRO≦VCC 4
Supply current Icc 400 900 μA No load, RE=VCC, DI=GND or VCC, DE=VCC 4
Supply current Icc 330 600 μA No load, RE=VCC, DI=GND or VCC, DE=GND 4
Supply current Icc 400 1000 μA No load, RE=GND, DI=GND or VCC, DE=VCC 4
Supply current Icc 330 800 μA No load, RE=GND, DI=GND or VCC, DE=GND 4
Standby mode supply current ISHDN 0.05 10 μA DE=GND, RE=VCC 4
ESD protection, IEC 61000-4-2 air-gap discharge (RS-485 pins) -16 16 kV IEC61000-4-2 air-gap discharge, half-duplex 4
ESD protection, IEC 61000-4-2 contact discharge (RS-485 pins) -16 16 kV IEC61000-4-2 contact discharge, half-duplex 4
ESD protection, human body model (pins to GND) -16 16 kV HBM, pin to GND 4
Driver propagation delay tDPLH, tDPHL 50 ns Fig 2 and 5, RL=54Ω, CL=50pF 7
Driver output skew tDSKEW 10 ns Fig 2 and 5, RL=54Ω, CL=50pF 7
Driver rise and fall time tDR, tDF 20 ns Fig 2 and 5, RL=54Ω, CL=50pF 7
Maximum data rate (driver) fMAX 16 Mbps 7
Driver enable to output high tDZH 150 ns Fig 3 and 6, CL=100pF, S3 closed 7
Driver enable to output low tDZL 150 ns Fig 3 and 6, CL=100pF, S2 closed 7
Driver disable from low tDLZ 100 ns Fig 3 and 6, CL=15pF, S2 closed 7
Driver disable from high tDHZ 100 ns Fig 3 and 6, CL=15pF, S3 closed 7
Driver enable from shutdown to output high tDZH(SHDN) 2200 ns Fig 3 and 6, CL=15pF, S3 closed 7
Driver enable from shutdown to output low tDZL(SHDN) 2200 ns Fig 3 and 6, CL=15pF, S2 closed 7
Shutdown time tSHDN 50 350 700 ns Note 4 7
Receiver propagation delay tRPLH, tRPHL 50 ns Fig 7 and 8, CL=15pF, /VID/≥2.0V, VID≤15ns 7
Receiver output skew tRSKEW 20 ns Fig 7 and 8, CL=15pF, /VID/≥2.0V, VID≤15ns 7
Maximum data rate (receiver) fMAX 16 Mbps 7
Receiver enable to output low tRZL 50 ns Fig 4 and 9, S1=-1.3.3V, S2 to VCC 7
Receiver enable to output high tRZH 50 ns Fig 4 and 9, S1=+1.3.3V, S2 to GND 7
Receiver disable from low tRLZ 50 ns Fig 4 and 9, S1=-1.3.3V, S2 to VCC 7
Receiver disable from high tRHZ 50 ns Fig 4 and 9, S1=+1.3.3V, S2 to GND 7
Receiver enable from shutdown to output high tRZH(SHDN) 2200 ns Fig 4 and 9, S1=-1.3.3V, S2 to VCC 7
Receiver enable from shutdown to output low tRZL(SHDN) 2200 ns Fig 4 and 9, S1=+1.3.3V, S2 to GND 7
Input hysteresis VHYS 100 mV DE, DI, RE 4
Receiver input hysteresis ΔVTH 15 mV VA+VB=0 4
Thermal shutdown temperature TTS 165 ℃ 4
Thermal shutdown hysteresis TTSH 15 ℃ 4

CAD (KiCad official)

  • Symbol: MAX3078EIN
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: DIP-8 (KiCad packages3D, STEP)
  • 3D model files: max3078ein-etched.step / max3078ein-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max3078ein.step / max3078ein.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HGSEMI datasheet (23 pp, sha256 96528bc5b794065e, retrieved 2026-10-16, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF