main
Ray
Publish 0.1.0
c10f10d
MAX3073EESD+T
Analog Devices Inc Maxim Integrated · RS-485 / RS-422 ICs · SOIC-14
MAX3073EESD+T from Analog Devices Inc Maxim Integrated, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | N.C. | unconnected | No Connect. Not internally connected; can be connected to GND. |
| 2 | RO | output | Receiver Output. When RE is low and (A - B) ≥ -50mV, RO is high; if (A - B) ≤ -200mV, RO is low. |
| 3 | RE | input | Receiver Output Enable. Drive RE low to enable RO; RO is high impedance when RE is high, and RE is a hot-swap input. |
| 4 | DE | input | Driver Output Enable. Drive DE high to enable the driver outputs, which are high impedance when DE is low; DE is a hot-swap input. |
| 5 | DI | input | Driver Input. With DE high, a low on DI forces the noninverting output low and the inverting output high, and a high on DI forces the noninverting output high and the inverting output low. |
| 6 | GND | power_in | Ground. |
| 7 | GND | power_in | Ground. |
| 8 | N.C. | unconnected | No Connect. Not internally connected; can be connected to GND. |
| 9 | Y | output | Noninverting Driver Output. |
| 10 | Z | output | Inverting Driver Output. |
| 11 | B | input | Inverting Receiver Input. |
| 12 | A | input | Noninverting Receiver Input. |
| 13 | N.C. | unconnected | No Connect. Not internally connected; can be connected to GND. |
| 14 | VCC | power_in | Positive Supply, VCC = 3.3V ±10%. Bypass VCC to GND with a 0.1µF capacitor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | SOIC-14 |
| Category | Interface |
| Pins | 14 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (VCC) | VCC | 6 | V | Referenced to GND | 2 | ||
| Control Input Voltage (RE, DE, SLR, H/F, TXP, RXP) | -0.3 | 6 | V | Referenced to GND | 2 | ||
| Driver Input Voltage (DI) | -0.3 | 6 | V | Referenced to GND | 2 | ||
| Driver Output Voltage (Z, Y, A, B) | -8 | 13 | V | 2 | |||
| Receiver Input Voltage (A, B) | -8 | 13 | V | 2 | |||
| Receiver Input Voltage Full Duplex (A, B) | -8 | 13 | V | Full duplex | 2 | ||
| Receiver Output Voltage (RO) | -0.3 | V | Max printed as (VCC + 0.3V), not converted | 2 | |||
| Driver Output Current | -250 | 250 | mA | 2 | |||
| Junction Temperature | 150 | °C | 2 | ||||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Operating Temperature Range (MAX307_EE__) | -40 | 85 | °C | MAX307_EE__ grade (MAX3073EESD) | 2 | ||
| Differential Driver Output Voltage, RS-422 | VOD | 2 | V | RL = 100Ω (RS422), Figure 1 | 2 | ||
| Differential Driver Output Voltage, RS-485 | VOD | 1.5 | V | RL = 54Ω (RS485), Figure 1 | 2 | ||
| Change in Magnitude of Differential Output Voltage | ΔVOD | 0.2 | V | RL = 100Ω or 54Ω, Figure 1 (Note 2) | 2 | ||
| Driver Common-Mode Output Voltage | VOC | 3 | V | RL = 100Ω or 54Ω, Figure 1 | 2 | ||
| Change in Magnitude of Common-Mode Voltage | ΔVOC | 0.2 | V | RL = 100Ω or 54Ω, Figure 1 (Note 2) | 2 | ||
| Input High Voltage | VIH | 2 | V | DE, DI, RE, TXP, RXP, H/F | 2 | ||
| Input Low Voltage | VIL | 0.8 | V | DE, DI, RE, TXP, RXP, H/F | 2 | ||
| Input Current | IIN1 | -1 | 1 | µA | DE, DI, RE | 2 | |
| Input Impedance First Transition | 1 | 10 | kΩ | DE, first transition | 2 | ||
| SRL Input Low Voltage | 0.4 | V | 2 | ||||
| SRL Input Current | 75 | µA | SRL = VCC | 2 | |||
| SRL Input Current | -75 | µA | SRL = GND | 2 | |||
| Output Leakage (Y and Z), Full Duplex | 125 | µA | DE = GND, VCC = GND or 3.6V, VIN = +12V | 2 | |||
| Output Leakage (Y and Z), Full Duplex | -100 | µA | DE = GND, VCC = GND or 3.6V, VIN = -7V | 2 | |||
| Driver Short-Circuit Output Current | IOSD | 40 | 250 | mA | 0 ≤ VOUT ≤ 12V (Note 3) | 3 | |
| Driver Short-Circuit Output Current | IOSD | -250 | -40 | mA | -7V ≤ VOUT ≤ VCC (Note 3) | 3 | |
| Driver Short-Circuit Foldback Output Current | IOSDF | 20 | mA | (VCC - 1V) ≤ VOUT ≤ 12V (Note 3) | 3 | ||
| Driver Short-Circuit Foldback Output Current | IOSDF | -20 | mA | -7V ≤ VOUT ≤ 1V (Note 3) | 3 | ||
| Input Current (A and B) | IA, B | 125 | µA | DE = GND, VCC = GND or 3.6V, VIN = +12V | 3 | ||
| Input Current (A and B) | IA, B | -100 | µA | DE = GND, VCC = GND or 3.6V, VIN = -7V | 3 | ||
| Receiver Differential Threshold Voltage | VTH | -200 | -125 | -50 | mV | -7V ≤ VCM ≤ 12V | 3 |
| RO Output Low Voltage | VOL | 0.4 | V | IO = 1mA | 3 | ||
| Three-State Output Current at Receiver | IOZR | -1 | 1 | µA | 0 ≤ VO ≤ VCC | 3 | |
| Receiver Input Resistance | RIN | 96 | kΩ | -7V ≤ VCM ≤ 12V | 3 | ||
| Receiver Output Short-Circuit Current | IOSR | -80 | 80 | mA | 0V ≤ VRO ≤ VCC | 3 | |
| Supply Current | ICC | 0.8 | 1.5 | mA | No load, RE = 0, DE = VCC | 3 | |
| Supply Current in Shutdown Mode | ISHDN | 0.05 | 10 | µA | RE = VCC, DE = GND | 3 | |
| ESD Protection for Y, Z, A, and B | -15 | 15 | kV | Human Body Model | 3 | ||
| Supply Voltage | VCC | 3.3 | V | VCC = 3.3V ±10%, TA = TMIN to TMAX; typical at VCC = 3.3V, TA = +25°C | 2 | ||
| Driver Propagation Delay, tDPLH | tDPLH | 180 | 800 | ns | CL = 50pF, RL = 54Ω, Figures 2 and 3 | 5 | |
| Driver Propagation Delay, tDPHL | tDPHL | 180 | 800 | ns | CL = 50pF, RL = 54Ω, Figures 2 and 3 | 5 | |
| Driver Differential Output Rise or Fall Time | tDR, tDF | 200 | 800 | ns | CL = 50pF, RL = 54Ω, Figures 2 and 3 | 5 | |
| Differential Driver Output Skew | tDSKEW | 100 | ns | CL = 50pF, RL = 54Ω, Figures 2 and 3 | 5 | ||
| Driver Enable to Output High | tDZH | 2500 | ns | Figure 4 | 5 | ||
| Driver Enable to Output Low | tDZL | 2500 | ns | Figure 5 | 5 | ||
| Driver Disable Time from Low | tDLZ | 100 | ns | Figure 5 | 5 | ||
| Driver Disable Time from High | tDHZ | 100 | ns | Figure 4 | 5 | ||
| Driver Enable from Shutdown to Output High | tDZH(SHDN) | 4500 | ns | Figure 4 | 5 | ||
| Driver Enable from Shutdown to Output Low | tDZL(SHDN) | 4500 | ns | Figure 5 | 5 | ||
| Time to Shutdown (driver) | tSHDN | 50 | 200 | 600 | ns | 5 | |
| Receiver Propagation Delay, tRPLH | tRPLH | 200 | ns | CL = 15pF, Figures 6 and 7 | 5 | ||
| Receiver Propagation Delay, tRPHL | tRPHL | 200 | ns | CL = 15pF, Figures 6 and 7 | 5 | ||
| Receiver Output Skew | tRSKEW | 30 | ns | CL = 15pF, Figures 6 and 7 | 5 | ||
| Receiver Enable from Shutdown to Output High | tRZH(SHDN) | 4000 | ns | Figure 8 | 5 | ||
| Receiver Enable from Shutdown to Output Low | tRZL(SHDN) | 4000 | ns | Figure 8 | 5 | ||
| Time to Shutdown (receiver) | tSHDN | 50 | 200 | 600 | ns | 5 |
CAD (KiCad official)
- Symbol:
MAX3073EESD+T - Footprint:
Package_SO:SOIC-14_3.9x8.7mm_P1.27mm - 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files:
max3073eesd-t-etched.step/max3073eesd-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max3073eesd-t.step/max3073eesd-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc Maxim Integrated datasheet (23 pp, sha256
864232a540aeec53, retrieved 2026-10-19, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MAX3073EESD+T
**Analog Devices Inc Maxim Integrated** · RS-485 / RS-422 ICs · SOIC-14
MAX3073EESD+T from Analog Devices Inc Maxim Integrated, in a SOIC-14. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | N.C. | unconnected | No Connect. Not internally connected; can be connected to GND. |
| 2 | RO | output | Receiver Output. When RE is low and (A - B) ≥ -50mV, RO is high; if (A - B) ≤ -200mV, RO is low. |
| 3 | RE | input | Receiver Output Enable. Drive RE low to enable RO; RO is high impedance when RE is high, and RE is a hot-swap input. |
| 4 | DE | input | Driver Output Enable. Drive DE high to enable the driver outputs, which are high impedance when DE is low; DE is a hot-swap input. |
| 5 | DI | input | Driver Input. With DE high, a low on DI forces the noninverting output low and the inverting output high, and a high on DI forces the noninverting output high and the inverting output low. |
| 6 | GND | power_in | Ground. |
| 7 | GND | power_in | Ground. |
| 8 | N.C. | unconnected | No Connect. Not internally connected; can be connected to GND. |
| 9 | Y | output | Noninverting Driver Output. |
| 10 | Z | output | Inverting Driver Output. |
| 11 | B | input | Inverting Receiver Input. |
| 12 | A | input | Noninverting Receiver Input. |
| 13 | N.C. | unconnected | No Connect. Not internally connected; can be connected to GND. |
| 14 | VCC | power_in | Positive Supply, VCC = 3.3V ±10%. Bypass VCC to GND with a 0.1µF capacitor. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | SOIC-14 |
| Category | Interface |
| Pins | 14 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage (VCC) | VCC | | | 6 | V | Referenced to GND | 2 |
| Control Input Voltage (RE, DE, SLR, H/F, TXP, RXP) | | -0.3 | | 6 | V | Referenced to GND | 2 |
| Driver Input Voltage (DI) | | -0.3 | | 6 | V | Referenced to GND | 2 |
| Driver Output Voltage (Z, Y, A, B) | | -8 | | 13 | V | | 2 |
| Receiver Input Voltage (A, B) | | -8 | | 13 | V | | 2 |
| Receiver Input Voltage Full Duplex (A, B) | | -8 | | 13 | V | Full duplex | 2 |
| Receiver Output Voltage (RO) | | -0.3 | | | V | Max printed as (VCC + 0.3V), not converted | 2 |
| Driver Output Current | | -250 | | 250 | mA | | 2 |
| Junction Temperature | | | | 150 | °C | | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Operating Temperature Range (MAX307_EE__) | | -40 | | 85 | °C | MAX307_EE__ grade (MAX3073EESD) | 2 |
| Differential Driver Output Voltage, RS-422 | VOD | 2 | | | V | RL = 100Ω (RS422), Figure 1 | 2 |
| Differential Driver Output Voltage, RS-485 | VOD | 1.5 | | | V | RL = 54Ω (RS485), Figure 1 | 2 |
| Change in Magnitude of Differential Output Voltage | ΔVOD | | | 0.2 | V | RL = 100Ω or 54Ω, Figure 1 (Note 2) | 2 |
| Driver Common-Mode Output Voltage | VOC | | | 3 | V | RL = 100Ω or 54Ω, Figure 1 | 2 |
| Change in Magnitude of Common-Mode Voltage | ΔVOC | | | 0.2 | V | RL = 100Ω or 54Ω, Figure 1 (Note 2) | 2 |
| Input High Voltage | VIH | 2 | | | V | DE, DI, RE, TXP, RXP, H/F | 2 |
| Input Low Voltage | VIL | | | 0.8 | V | DE, DI, RE, TXP, RXP, H/F | 2 |
| Input Current | IIN1 | -1 | | 1 | µA | DE, DI, RE | 2 |
| Input Impedance First Transition | | 1 | | 10 | kΩ | DE, first transition | 2 |
| SRL Input Low Voltage | | | | 0.4 | V | | 2 |
| SRL Input Current | | | | 75 | µA | SRL = VCC | 2 |
| SRL Input Current | | -75 | | | µA | SRL = GND | 2 |
| Output Leakage (Y and Z), Full Duplex | | | | 125 | µA | DE = GND, VCC = GND or 3.6V, VIN = +12V | 2 |
| Output Leakage (Y and Z), Full Duplex | | -100 | | | µA | DE = GND, VCC = GND or 3.6V, VIN = -7V | 2 |
| Driver Short-Circuit Output Current | IOSD | 40 | | 250 | mA | 0 ≤ VOUT ≤ 12V (Note 3) | 3 |
| Driver Short-Circuit Output Current | IOSD | -250 | | -40 | mA | -7V ≤ VOUT ≤ VCC (Note 3) | 3 |
| Driver Short-Circuit Foldback Output Current | IOSDF | 20 | | | mA | (VCC - 1V) ≤ VOUT ≤ 12V (Note 3) | 3 |
| Driver Short-Circuit Foldback Output Current | IOSDF | | | -20 | mA | -7V ≤ VOUT ≤ 1V (Note 3) | 3 |
| Input Current (A and B) | IA, B | | | 125 | µA | DE = GND, VCC = GND or 3.6V, VIN = +12V | 3 |
| Input Current (A and B) | IA, B | -100 | | | µA | DE = GND, VCC = GND or 3.6V, VIN = -7V | 3 |
| Receiver Differential Threshold Voltage | VTH | -200 | -125 | -50 | mV | -7V ≤ VCM ≤ 12V | 3 |
| RO Output Low Voltage | VOL | | | 0.4 | V | IO = 1mA | 3 |
| Three-State Output Current at Receiver | IOZR | -1 | | 1 | µA | 0 ≤ VO ≤ VCC | 3 |
| Receiver Input Resistance | RIN | 96 | | | kΩ | -7V ≤ VCM ≤ 12V | 3 |
| Receiver Output Short-Circuit Current | IOSR | -80 | | 80 | mA | 0V ≤ VRO ≤ VCC | 3 |
| Supply Current | ICC | | 0.8 | 1.5 | mA | No load, RE = 0, DE = VCC | 3 |
| Supply Current in Shutdown Mode | ISHDN | | 0.05 | 10 | µA | RE = VCC, DE = GND | 3 |
| ESD Protection for Y, Z, A, and B | | -15 | | 15 | kV | Human Body Model | 3 |
| Supply Voltage | VCC | | 3.3 | | V | VCC = 3.3V ±10%, TA = TMIN to TMAX; typical at VCC = 3.3V, TA = +25°C | 2 |
| Driver Propagation Delay, tDPLH | tDPLH | 180 | | 800 | ns | CL = 50pF, RL = 54Ω, Figures 2 and 3 | 5 |
| Driver Propagation Delay, tDPHL | tDPHL | 180 | | 800 | ns | CL = 50pF, RL = 54Ω, Figures 2 and 3 | 5 |
| Driver Differential Output Rise or Fall Time | tDR, tDF | 200 | | 800 | ns | CL = 50pF, RL = 54Ω, Figures 2 and 3 | 5 |
| Differential Driver Output Skew | tDSKEW | | | 100 | ns | CL = 50pF, RL = 54Ω, Figures 2 and 3 | 5 |
| Driver Enable to Output High | tDZH | | | 2500 | ns | Figure 4 | 5 |
| Driver Enable to Output Low | tDZL | | | 2500 | ns | Figure 5 | 5 |
| Driver Disable Time from Low | tDLZ | | | 100 | ns | Figure 5 | 5 |
| Driver Disable Time from High | tDHZ | | | 100 | ns | Figure 4 | 5 |
| Driver Enable from Shutdown to Output High | tDZH(SHDN) | | | 4500 | ns | Figure 4 | 5 |
| Driver Enable from Shutdown to Output Low | tDZL(SHDN) | | | 4500 | ns | Figure 5 | 5 |
| Time to Shutdown (driver) | tSHDN | 50 | 200 | 600 | ns | | 5 |
| Receiver Propagation Delay, tRPLH | tRPLH | | | 200 | ns | CL = 15pF, Figures 6 and 7 | 5 |
| Receiver Propagation Delay, tRPHL | tRPHL | | | 200 | ns | CL = 15pF, Figures 6 and 7 | 5 |
| Receiver Output Skew | tRSKEW | | | 30 | ns | CL = 15pF, Figures 6 and 7 | 5 |
| Receiver Enable from Shutdown to Output High | tRZH(SHDN) | | | 4000 | ns | Figure 8 | 5 |
| Receiver Enable from Shutdown to Output Low | tRZL(SHDN) | | | 4000 | ns | Figure 8 | 5 |
| Time to Shutdown (receiver) | tSHDN | 50 | 200 | 600 | ns | | 5 |
## CAD (KiCad official)
- Symbol: `MAX3073EESD+T`
- Footprint: `Package_SO:SOIC-14_3.9x8.7mm_P1.27mm`
- 3D model: SOIC-14 (KiCad packages3D, STEP)
- 3D model files: `max3073eesd-t-etched.step` / `max3073eesd-t-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max3073eesd-t.step` / `max3073eesd-t.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices Inc Maxim Integrated datasheet](https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8600615720568823808) (23 pp, sha256 `864232a540aeec53`, retrieved 2026-10-19, tier: lcsc)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/max3073eesd-t-datasheet.pdf)