component

MAX3041EUE+

Public Made by Adom

by adom

Maxim Integrated RS-485/RS-422 ICs, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.

componentinterface icsmax3041eue+factory-2.0.0extractor-text
Overview Files Discover Packages Releases Dependencies Issues Breadcrumbs Pull Requests Activity

3D Model

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

Datasheet

Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MAX3041EUE+

Maxim Integrated · RS-485/RS-422 ICs · TSSOP-16

MAX3041EUE+ from Maxim Integrated, in a TSSOP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 T1IN input Transmitter 1 driver input that controls the Y1/Z1 outputs; the datasheet gives VIH of 2.0V minimum and VIL of 0.8V maximum for T_IN.
2 Y1 output Noninverting transmitter 1 output, high impedance when the transmitter is disabled, with ±10kV Human Body Model ESD protection.
3 Z1 output Inverting transmitter 1 output, high impedance when the transmitter is disabled, with ±10kV Human Body Model ESD protection.
4 EN12 input Active-high transmitter enable for transmitters 1 and 2; driving it low disables those transmitters, and the part enters low-power shutdown only when both EN12 and EN34 are low.
5 Z2 output Inverting transmitter 2 output, high impedance when the transmitter is disabled, with ±10kV Human Body Model ESD protection.
6 Y2 output Noninverting transmitter 2 output, high impedance when the transmitter is disabled, with ±10kV Human Body Model ESD protection.
7 T2IN input Transmitter 2 driver input that controls the Y2/Z2 outputs; the datasheet gives VIH of 2.0V minimum and VIL of 0.8V maximum for T_IN.
8 GND power_in Ground reference for the device; all device voltages are referenced to GND.
9 T3IN input Transmitter 3 driver input that controls the Y3/Z3 outputs; the datasheet gives VIH of 2.0V minimum and VIL of 0.8V maximum for T_IN.
10 Y3 output Noninverting transmitter 3 output, high impedance when the transmitter is disabled, with ±10kV Human Body Model ESD protection.
11 Z3 output Inverting transmitter 3 output, high impedance when the transmitter is disabled, with ±10kV Human Body Model ESD protection.
12 EN34 input Active-high transmitter enable for transmitters 3 and 4; driving it low disables those transmitters, and the part enters low-power shutdown only when both EN12 and EN34 are low.
13 Z4 output Inverting transmitter 4 output, high impedance when the transmitter is disabled, with ±10kV Human Body Model ESD protection.
14 Y4 output Noninverting transmitter 4 output, high impedance when the transmitter is disabled, with ±10kV Human Body Model ESD protection.
15 T4IN input Transmitter 4 driver input that controls the Y4/Z4 outputs; the datasheet gives VIH of 2.0V minimum and VIL of 0.8V maximum for T_IN.
16 VCC power_in Positive 5V supply (5V ±5% in the electrical characteristics); bypass with a 0.1µF capacitor to GND.

Key specifications

Parameter Value
Manufacturer Maxim Integrated
Package TSSOP-16
Category Interface ICs
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Driver Differential Output VOD 2 V Figure 1, R = 50Ω 2
Driver Differential Output VOD 1.5 V Figure 1, R = 27Ω 2
Change in Magnitude of Differential Output Voltage ΔVOD 0.2 V Figure 1, R = 50Ω or 27Ω (Note 2) 2
Driver Common-Mode Output Voltage VOC 3 V Figure 1, R = 50Ω or 27Ω 2
Change In Magnitude of Common-Mode Voltage ΔVOC 0.2 V Figure 1, R = 50Ω or 27Ω (Note 2) 2
Input High Voltage VIH 2 V T_IN, EN_, EN, EN 2
Input Low Voltage VIL 0.8 V T_IN, EN_, EN, EN 2
Hot-Swap Driver Input Current IHOT SWAP -200 200 µA EN_, EN, EN (Note 3) 2
Driver Input Current IIN -1 1 µA T_IN, EN_, EN, EN 2
Driver Short-Circuit Output Current ISC 25 250 mA -7V < VOUT < +10V (Note 4); printed as ±25 / ±250 mA 2
Output Leakage (Y_, Z_) when Disabled -1 1 µA EN_ = GND when Disabled 2
ESD Protection (Y_, Z_) -10 10 kV Human Body Model 2
Electrical Fast Transient/Burst Immunity -4 4 kV IEC 1000-4-4 2
Supply Current ICC 1 2 mA No load 2
Supply Current in Shutdown Mode ISHDN 0.002 10 µA EN_ = GND, TA = +25°C 2
Maximum Data Rate fMAX 2.5 Mbps 3
Driver Propagation Delay tPLH tPLH 70 150 ns Figures 2 and 3, RDIFF = 54Ω, CDIFF = 50pF 3
Driver Propagation Delay tPHL tPHL 70 150 ns Figures 2 and 3, RDIFF = 54Ω, CDIFF = 50pF 3
Driver Differential Output Fall-Time tF 33 70 133 ns Figures 2 and 3, RDIFF = 54Ω, CDIFF = 50pF 3
Driver Differential Output Rise-Time tR 33 70 133 ns Figures 2 and 3, RDIFF = 54Ω, CDIFF = 50pF 3
Skew Driver to Driver (different chips) tDSKEW -52 52 ns Different chips 3
Skew Driver to Driver (same chip) tSSKEW -15 15 ns Same chip; Figures 2 and 3, RDIFF = 54Ω, CDIFF = 50pF 3
Driver Differential Output Skew /tPLH - tPHL/ tSKEW -15 15 ns Figures 2 and 3, RDIFF = 54Ω, CDIFF = 50pF 3
Driver Enable to Output High tZH 400 ns MAX3041, Figures 4 and 5, S2 closed, RL = 500Ω, CL = 100pF 3
Driver Enable from Shutdown to Output High tZH(SHDN) 400 ns Figures 4 and 5, S2 closed, RL = 500Ω, CL = 100pF 4
Driver Enable to Output Low tZL 400 ns MAX3041, Figures 4 and 5, S1 closed, RL = 500Ω, CL = 100pF 4
Driver Enable from Shutdown to Output Low tZL(SHDN) 400 ns Figures 4 and 5, S1 closed, RL = 500Ω, CL = 100pF 4
Driver Disable Time from Low tLZ 500 ns Figures 4 and 5, S1 closed, RL = 500Ω, CL = 15pF 4
Driver Disable Time from High tHZ 500 ns Figures 4 and 5, S2 closed, RL = 500Ω, CL = 15pF 4
Supply Voltage VCC 7 V All voltages referenced to GND 2
Control Input Voltage (EN, EN, EN_) -0.3 V Maximum printed as (VCC + 0.3V) 2
Driver Input Voltage (T_IN) -0.3 V Maximum printed as (VCC + 0.3V) 2
Driver Output Voltage (Y_, Z_) Driver Disabled -7.5 12.5 V Driver Disabled 2
Driver Output Voltage (Y_, Z_) Driver Enabled -7.5 10 V Driver Enabled 2
Operating Temperature Range TA -40 85 °C MAX304_E_E grade (MAX3041EUE) 2
Maximum Junction Temperature TJ 150 °C 2
Storage Temperature Range TSTG -65 150 °C 2
Lead Temperature 300 °C Soldering, 10s 2
Supply voltage tolerance VCC -5 5 % Test condition for ELECTRICAL CHARACTERISTICS: VCC = +5V ±5% 2

CAD (KiCad official)

  • Symbol: MAX3041EUE+
  • Footprint: Package_SO:TSSOP-16_4.4x5mm_P0.65mm
  • 3D model: TSSOP-16 (KiCad packages3D, STEP)
  • 3D model files: max3041eue-etched.step / max3041eue-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max3041eue.step / max3041eue.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Maxim Integrated datasheet (15 pp, sha256 2f88a25548d5ca98, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF