main
History Download
Ray Publish 0.1.0 1d4c1ad

MAX3030ECSE+

Analog Devices Inc./Maxim Integrated · RS-485/RS-422 ICs · SOIC-16

MAX3030ECSE+ from Analog Devices Inc./Maxim Integrated, in a SOIC-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DI1 input Transmitter 1 input; a high forces DO1+ high and DO1- low, a low forces DO1+ low and DO1- high when enabled.
2 DO1+ output Noninverting RS-422 output of transmitter 1, ±15kV HBM ESD protected.
3 DO1- output Inverting RS-422 output of transmitter 1, ±15kV HBM ESD protected.
4 EN input Active-high transmitter enable input for all transmitters; hot-swap protected, outputs are high impedance when disabled.
5 DO2- output Inverting RS-422 output of transmitter 2, ±15kV HBM ESD protected.
6 DO2+ output Noninverting RS-422 output of transmitter 2, ±15kV HBM ESD protected.
7 DI2 input Transmitter 2 input; a high forces DO2+ high and DO2- low, a low forces DO2+ low and DO2- high when enabled.
8 GND power_in Ground.
9 DI3 input Transmitter 3 input; a high forces DO3+ high and DO3- low, a low forces DO3+ low and DO3- high when enabled.
10 DO3+ output Noninverting RS-422 output of transmitter 3, ±15kV HBM ESD protected.
11 DO3- output Inverting RS-422 output of transmitter 3, ±15kV HBM ESD protected.
12 ~{EN} input Active-low transmitter enable input for all transmitters; hot-swap protected, outputs are high impedance when disabled.
13 DO4- output Inverting RS-422 output of transmitter 4, ±15kV HBM ESD protected.
14 DO4+ output Noninverting RS-422 output of transmitter 4, ±15kV HBM ESD protected.
15 DI4 input Transmitter 4 input; a high forces DO4+ high and DO4- low, a low forces DO4+ low and DO4- high when enabled.
16 VCC power_in Positive supply, +3V to +3.6V; bypass to GND with a 0.1µF capacitor.

Key specifications

Parameter Value
Manufacturer Analog Devices Inc./Maxim Integrated
Package SOIC-16
Category Communication Interface Chip
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Differential Driver Output VOD1 2 V RL = 100Ω, Figure 1 2
Differential Driver Output VOD2 3.6 V RL = ∞, Figure 1 2
Change in Differential Output Voltage ∆VOD -0.4 0.4 V RL = 100Ω (Note 2) 2
Driver Common-Mode Output Voltage VOC 3 V RL = 100Ω, Figure 1 2
Change in Common-Mode Voltage ∆VOC -0.4 0.4 V RL = 100Ω (Note 2) 2
Three-State Leakage Current IOZ -10 10 µA VOUT = VCC or GND, driver disabled 2
Output Leakage Current IOFF 20 µA VCC = 0V, VOUT = 3V or 6V 2
Driver Output Short-Circuit Current ISC -150 mA VOUT = 0V, VIN = VCC or GND (Note 3) 2
Input High Voltage VIH 2 V 2
Input Low Voltage VIL 0.4 V 2
Input Current ILEAK -2 2 µA 2
Hot-Swap Driver Input Current IHOTSWAP -200 200 µA EN, EN, EN1&2, EN3&4 (Note 4) 2
Supply Current ICC 100 µA No load 2
Driver Propagation Delay tDPLH, tDPHL 8 16 ns RL = 100Ω, CL = 50pF, Figures 2, 3 3
Differential Transition Time tR, tF 10 ns RL = 100Ω, CL = 50pF (10% to 90%), Figures 2, 3 3
Differential Skew / Driver to Driver Skew tSK1, tSK2 -2 2 ns RL = 100Ω, CL = 50pF, VCC = 3.3V 3
Skew Part to Part tSK3 5 ns RL = 100Ω, CL = 50pF, VCC = 3.3V, ∆TMAX = +5°C 3
Maximum Data Rate 20 Mbps 3
Driver Enable to Output High tDZH 50 ns S2 closed, RL = 500Ω, CL = 50pF, Figures 4, 5 3
Driver Enable to Output Low tDZL 50 ns S1 closed, RL = 500Ω, CL = 50pF, Figures 4, 5 3
Driver Disable Time from Low tDLZ 50 ns S1 closed, RL = 500Ω, CL = 50pF, Figures 4, 5 3
Driver Disable Time from High tDHZ 50 ns S2 closed, RL = 500Ω, CL = 50pF, Figures 4, 5 3
Thermal-Shutdown Threshold TSH 160 °C 2
Thermal-Shutdown Hysteresis 10 °C 2
ESD Protection DO_ -15 15 kV Human Body Model 2
Supply Voltage VCC 3 3.6 V 2
Operating Temperature Range TA 0 70 °C MAX303_EC_ 2
Supply Voltage VCC 6 V 2
Enable Input Voltage EN -0.3 6 V EN1&2, EN3&4, EN, EN 2
Driver Input Voltage DI_ -0.3 6 V 2
Driver Output Voltage, normal DO_ -0.3 3.9 V normal condition: -0.3V to (VCC + 0.3V); 3.9V computed from VCC=3.6V - printed form is VCC + 0.3V 2
Driver Output Voltage, power-off or three-state DO_ -0.3 6 V power-off or three-state condition 2
Driver Output Current per Pin -150 150 mA 2
Junction Temperature TJ 150 °C 2
Storage Temperature Range TSTG -65 160 °C 2
Lead Temperature 300 °C soldering, 10s 2

CAD (KiCad official)

  • Symbol: MAX3030ECSE+
  • Footprint: Package_SO:SOIC-16_3.9x9.9mm_P1.27mm
  • 3D model: SOIC-16 (KiCad packages3D, STEP)
  • 3D model files: max3030ecse-etched.step / max3030ecse-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max3030ecse.step / max3030ecse.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices Inc./Maxim Integrated datasheet (14 pp, sha256 2356ee162b9f83de, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF