main
Ray
Publish 0.1.0
7283320
MAX232N
Texas Instruments · RS232 ICs · PDIP-16
MAX232N from Texas Instruments, in a PDIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive lead of the C1 charge-pump capacitor, which uses a 1 µF capacitor in the typical operating circuit. |
| 2 | VS+ | power_out | Positive charge-pump output for the storage capacitor only, with an absolute maximum of VCC - 0.3 V to 15 V. |
| 3 | C1- | passive | Negative lead of the C1 charge-pump capacitor, which uses a 1 µF capacitor in the typical operating circuit. |
| 4 | C2+ | passive | Positive lead of the C2 charge-pump capacitor, which uses a 1 µF capacitor in the typical operating circuit. |
| 5 | C2- | passive | Negative lead of the C2 charge-pump capacitor, which uses a 1 µF capacitor in the typical operating circuit. |
| 6 | VS- | power_out | Negative charge-pump output for the storage capacitor only, with an absolute maximum of -0.3 V to -15 V. |
| 7 | T2OUT | output | RS232 line data output to the remote RS232 system, with an output range of VS- - 0.3 V to VS+ + 0.3 V and unlimited short-circuit duration. |
| 8 | R2IN | input | RS232 line data input from the remote RS232 system, which accepts ±30 V. |
| 9 | R2OUT | output | Logic data output to the UART, with an output range of -0.3 V to VCC + 0.3 V; an open input produces a high output. |
| 10 | T2IN | input | Logic data input from the UART, with an absolute range of -0.3 V to VCC + 0.3 V, VIH of 2 V minimum and VIL of 0.8 V maximum, and an internal pull-up. |
| 11 | T1IN | input | Logic data input from the UART, with an absolute range of -0.3 V to VCC + 0.3 V, VIH of 2 V minimum and VIL of 0.8 V maximum, and an internal pull-up. |
| 12 | R1OUT | output | Logic data output of receiver 1 to the UART, with an output range of -0.3 V to VCC + 0.3 V (listed on the pin diagram only; the pin function table omits this row). |
| 13 | R1IN | input | RS232 line data input from the remote RS232 system, which accepts ±30 V. |
| 14 | T1OUT | output | RS232 line data output to the remote RS232 system, with an output range of VS- - 0.3 V to VS+ + 0.3 V and unlimited short-circuit duration. |
| 15 | GND | power_in | Ground reference; all device voltages are referenced to network GND. |
| 16 | VCC | power_in | Supply voltage input for the external 5 V supply, with a recommended range of 4.5 V to 5.5 V and an absolute maximum of 6 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-16 |
| Category | Interface |
| Pins | 16 |
CAD (KiCad official)
- Symbol:
MAX232N - Footprint:
Package_DIP:DIP-16_W7.62mm - 3D model: PDIP-16 (KiCad packages3D, STEP)
- 3D model files:
max232n-etched.step/max232n-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max232n.step/max232n.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (27 pp, sha256
01339e34573b5a2b, retrieved 2026-10-13, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# MAX232N
**Texas Instruments** · RS232 ICs · PDIP-16
MAX232N from Texas Instruments, in a PDIP-16. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | C1+ | passive | Positive lead of the C1 charge-pump capacitor, which uses a 1 µF capacitor in the typical operating circuit. |
| 2 | VS+ | power_out | Positive charge-pump output for the storage capacitor only, with an absolute maximum of VCC - 0.3 V to 15 V. |
| 3 | C1- | passive | Negative lead of the C1 charge-pump capacitor, which uses a 1 µF capacitor in the typical operating circuit. |
| 4 | C2+ | passive | Positive lead of the C2 charge-pump capacitor, which uses a 1 µF capacitor in the typical operating circuit. |
| 5 | C2- | passive | Negative lead of the C2 charge-pump capacitor, which uses a 1 µF capacitor in the typical operating circuit. |
| 6 | VS- | power_out | Negative charge-pump output for the storage capacitor only, with an absolute maximum of -0.3 V to -15 V. |
| 7 | T2OUT | output | RS232 line data output to the remote RS232 system, with an output range of VS- - 0.3 V to VS+ + 0.3 V and unlimited short-circuit duration. |
| 8 | R2IN | input | RS232 line data input from the remote RS232 system, which accepts ±30 V. |
| 9 | R2OUT | output | Logic data output to the UART, with an output range of -0.3 V to VCC + 0.3 V; an open input produces a high output. |
| 10 | T2IN | input | Logic data input from the UART, with an absolute range of -0.3 V to VCC + 0.3 V, VIH of 2 V minimum and VIL of 0.8 V maximum, and an internal pull-up. |
| 11 | T1IN | input | Logic data input from the UART, with an absolute range of -0.3 V to VCC + 0.3 V, VIH of 2 V minimum and VIL of 0.8 V maximum, and an internal pull-up. |
| 12 | R1OUT | output | Logic data output of receiver 1 to the UART, with an output range of -0.3 V to VCC + 0.3 V (listed on the pin diagram only; the pin function table omits this row). |
| 13 | R1IN | input | RS232 line data input from the remote RS232 system, which accepts ±30 V. |
| 14 | T1OUT | output | RS232 line data output to the remote RS232 system, with an output range of VS- - 0.3 V to VS+ + 0.3 V and unlimited short-circuit duration. |
| 15 | GND | power_in | Ground reference; all device voltages are referenced to network GND. |
| 16 | VCC | power_in | Supply voltage input for the external 5 V supply, with a recommended range of 4.5 V to 5.5 V and an absolute maximum of 6 V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | PDIP-16 |
| Category | Interface |
| Pins | 16 |
## CAD (KiCad official)
- Symbol: `MAX232N`
- Footprint: `Package_DIP:DIP-16_W7.62mm`
- 3D model: PDIP-16 (KiCad packages3D, STEP)
- 3D model files: `max232n-etched.step` / `max232n-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `max232n.step` / `max232n.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Texas Instruments datasheet](https://www.ti.com/cn/lit/gpn/max232) (27 pp, sha256 `01339e34573b5a2b`, retrieved 2026-10-13, tier: lcsc)
- **Datasheet language:** Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/max232n-datasheet.pdf)