main
Ray max232id: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) dadec63
{
  "slug": "max232id",
  "version": "0.1.0",
  "type": "component",
  "description": "Texas Instruments RS232 ICs, SOIC-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface",
    "max232id",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "max232id.kicad_sym",
    "max232id.kicad_mod",
    "max232id.glb",
    "max232id.step",
    "max232id.lbr",
    "docs/hero.png",
    "docs/max232id-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html"
  ],
  "component": {
    "mpn": "MAX232ID",
    "manufacturer": "Texas Instruments",
    "package": "SOIC-16",
    "pin_count": 16,
    "category": "Interface",
    "subcategory": "RS232 ICs",
    "datasheet": "https://www.ti.com/lit/ds/symlink/max232.pdf",
    "parts": {
      "symbol": "max232id.kicad_sym",
      "footprint": "max232id.kicad_mod",
      "model_3d": "max232id-etched.glb",
      "model_3d_plain": "max232id.glb",
      "model_3d_step": "max232id-etched.step",
      "model_3d_step_plain": "max232id.step",
      "lbr": "max232id.lbr"
    },
    "distributor_links": {
      "lcsc": "C354108",
      "mouser": "595-MAX232ID"
    },
    "distributor_check": {
      "checked_at": "2026-09-27T06:16:21Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": null,
        "status": "no match"
      },
      "mouser": {
        "pn": "595-MAX232ID",
        "status": "found",
        "lifecycle": "End of Life"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "C1+",
        "type": "passive",
        "description": "Positive lead of external 1μF storage capacitor C1"
      },
      {
        "number": "2",
        "name": "VS+",
        "type": "power_out",
        "description": "Positive charge pump output (~8.5V typical), connect to storage capacitor only"
      },
      {
        "number": "3",
        "name": "C1-",
        "type": "passive",
        "description": "Negative lead of external 1μF storage capacitor C1"
      },
      {
        "number": "4",
        "name": "C2+",
        "type": "passive",
        "description": "Positive lead of external 1μF storage capacitor C2"
      },
      {
        "number": "5",
        "name": "C2-",
        "type": "passive",
        "description": "Negative lead of external 1μF storage capacitor C2"
      },
      {
        "number": "6",
        "name": "VS-",
        "type": "power_out",
        "description": "Negative charge pump output (~-8.5V typical), connect to storage capacitor only"
      },
      {
        "number": "7",
        "name": "T2OUT",
        "type": "output",
        "description": "Driver 2 RS232 output, ±5V to ±7V swing at 3kΩ load, 30V/μs slew rate"
      },
      {
        "number": "8",
        "name": "R2IN",
        "type": "input",
        "description": "Receiver 2 RS232 input, accepts ±30V, threshold 1.7V to 2.4V positive-going"
      },
      {
        "number": "9",
        "name": "R2OUT",
        "type": "output",
        "description": "Receiver 2 logic output to UART, TTL/CMOS levels (0 to 5V), 500ns propagation delay typical"
      },
      {
        "number": "10",
        "name": "T2IN",
        "type": "input",
        "description": "Driver 2 logic input from UART, 0.8V to 2V threshold, TTL/CMOS compatible"
      },
      {
        "number": "11",
        "name": "T1IN",
        "type": "input",
        "description": "Driver 1 logic input from UART, 0.8V to 2V threshold, TTL/CMOS compatible"
      },
      {
        "number": "12",
        "name": "R1OUT",
        "type": "output",
        "description": "Receiver 1 logic output to UART, TTL/CMOS levels (0 to 5V), 500ns propagation delay typical"
      },
      {
        "number": "13",
        "name": "R1IN",
        "type": "input",
        "description": "Receiver 1 RS232 input, accepts ±30V, threshold 1.7V to 2.4V positive-going"
      },
      {
        "number": "14",
        "name": "T1OUT",
        "type": "output",
        "description": "Driver 1 RS232 output, ±5V to ±7V swing at 3kΩ load, 30V/μs slew rate"
      },
      {
        "number": "15",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference (0V), system ground connection"
      },
      {
        "number": "16",
        "name": "VCC",
        "type": "power_in",
        "description": "Positive supply input, 4.5V to 5.5V operating range, 8mA typical current"
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.2",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.2",
        "primary_model": "claude-haiku-4-5-20251001",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-4-6",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [],
        "pages_sent": 27,
        "cost_usd": 0.2692,
        "at": "2026-09-27T06:16:04"
      },
      "datasheet": {
        "url": "https://www.ti.com/lit/ds/symlink/max232.pdf",
        "pages": 27,
        "sha256": "47d45fefa0db5981",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "max232id.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          9.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d5eeddb4c0b304dc61950919b126fc61d7586abd5f16ab71a2a79759ec6498bf",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "max232id-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          9.9,
          1.75
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "39f2635497ba76001301de3f9da7eb28803d14d865067fe8fc8a8b180c349c72",
        "checked": "2026-10-07",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}