main
Ray Set visibility: public 0d78e78
{
  "schema_version": 1,
  "type": "component",
  "slug": "max202ipwr",
  "title": "MAX202IPWR",
  "brief": "Texas Instruments RS232 ICs, TSSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "version": "0.1.0",
  "license": "CC-BY-SA-4.0",
  "tags": [
    "component",
    "interface",
    "max202ipwr",
    "factory-2.0.0",
    "extractor-text"
  ],
  "component": {
    "mpn": "MAX202IPWR",
    "manufacturer": "Texas Instruments",
    "package": "TSSOP-16",
    "pin_count": 16,
    "category": "Interface",
    "subcategory": "RS232 ICs",
    "datasheet": "https://www.ti.com/cn/lit/gpn/max202",
    "parts": {
      "symbol": "max202ipwr.kicad_sym",
      "footprint": "max202ipwr.kicad_mod",
      "model_3d": "max202ipwr-hero.glb",
      "model_3d_plain": "max202ipwr.glb",
      "model_3d_step": "max202ipwr-etched.step",
      "model_3d_step_plain": "max202ipwr.step",
      "lbr": "max202ipwr.lbr"
    },
    "distributor_links": {
      "lcsc": "C436350",
      "digikey": "296-18485-2-ND",
      "mouser": "595-MAX202IPWR"
    },
    "distributor_check": {
      "checked_at": "2026-10-11T13:54:46Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "296-18485-2-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "595-MAX202IPWR",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "C1+",
        "type": "passive",
        "description": "Positive lead of the C1 charge-pump capacitor; the datasheet specifies 0.1 µF capacitors for C1 through C4 at VCC = 5 V ±0.5 V."
      },
      {
        "number": "2",
        "name": "V+",
        "type": "power_out",
        "description": "Positive charge-pump output for the storage capacitor only; the absolute maximum V+ is VCC - 0.3 V to 14 V."
      },
      {
        "number": "3",
        "name": "C1–",
        "type": "passive",
        "description": "Negative lead of the C1 charge-pump capacitor; the datasheet specifies 0.1 µF capacitors for C1 through C4."
      },
      {
        "number": "4",
        "name": "C2+",
        "type": "passive",
        "description": "Positive lead of the C2 charge-pump capacitor; the datasheet specifies 0.1 µF capacitors for C1 through C4."
      },
      {
        "number": "5",
        "name": "C2–",
        "type": "passive",
        "description": "Negative lead of the C2 charge-pump capacitor; the datasheet specifies 0.1 µF capacitors for C1 through C4."
      },
      {
        "number": "6",
        "name": "V–",
        "type": "power_out",
        "description": "Negative charge-pump output for the storage capacitor only; the absolute maximum V- is -14 V to 0.3 V."
      },
      {
        "number": "7",
        "name": "DOUT2",
        "type": "output",
        "description": "RS-232 line data output to the remote RS-232 system; driver outputs are protected against shorts to ground, with ±15 kV HBM ESD protection on this pin."
      },
      {
        "number": "8",
        "name": "RIN2",
        "type": "input",
        "description": "RS-232 line data input from the remote RS-232 system; the receiver accepts up to ±30 V and decodes inputs as low as ±3 V, with ±15 kV HBM ESD protection."
      },
      {
        "number": "9",
        "name": "ROUT2",
        "type": "output",
        "description": "Logic data output to the UART; receiver output is rated -0.3 V to VCC + 0.3 V, and an open RIN input produces a high output."
      },
      {
        "number": "10",
        "name": "DIN2",
        "type": "input",
        "description": "Logic data input from the UART; VIH is 2 V minimum and VIL is 0.8 V maximum, with an input range of 0 V to 5.5 V, and the driver input must not be left floating because it has no internal pullup."
      },
      {
        "number": "11",
        "name": "DIN1",
        "type": "input",
        "description": "Logic data input from the UART; VIH is 2 V minimum and VIL is 0.8 V maximum, with an input range of 0 V to 5.5 V, and the driver input must not be left floating because it has no internal pullup."
      },
      {
        "number": "12",
        "name": "ROUT1",
        "type": "output",
        "description": "Logic data output to the UART; receiver output is rated -0.3 V to VCC + 0.3 V, and an open RIN input produces a high output."
      },
      {
        "number": "13",
        "name": "RIN1",
        "type": "input",
        "description": "RS-232 line data input from the remote RS-232 system; the receiver accepts up to ±30 V and decodes inputs as low as ±3 V, with ±15 kV HBM ESD protection."
      },
      {
        "number": "14",
        "name": "DOUT1",
        "type": "output",
        "description": "RS-232 line data output to the remote RS-232 system; driver outputs are protected against shorts to ground, with ±15 kV HBM ESD protection on this pin."
      },
      {
        "number": "15",
        "name": "GND",
        "type": "power_in",
        "description": "Ground reference; all device voltages in the datasheet are referenced to network GND."
      },
      {
        "number": "16",
        "name": "VCC",
        "type": "power_in",
        "description": "Supply voltage input, connected to an external 5 V supply; the recommended range is 4.5 V to 5.5 V and VCC should be bypassed to ground with at least 0.1 µF."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet gives one pin table (Table 4-1, Figure 4-1) shared by the D (SOIC), DW (SOIC) and PW (; Pin types were mapped to KiCad classes: the datasheet's 'O' pins V+ and V– were typed power_out beca; Several description limits come from other pages rather than page 3: the ±15 kV HBM ESD rating for p"
        ],
        "pages_sent": 28,
        "cost_usd": 0.09,
        "at": "2026-10-11T13:54:31"
      },
      "datasheet": {
        "url": "https://www.ti.com/cn/lit/gpn/max202",
        "pages": 28,
        "sha256": "a9cc56df98fe6254",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "max202ipwr.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "6ad5e98224d02a427d9a6b929a28dbc158b9925fba5adec12db05079f1016948",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "max202ipwr-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.4,
          5,
          1.1
        ],
        "zmin_mm": 0,
        "centre_offset_mm": 0,
        "footprint_binding": "identity",
        "sha256": "d4948ac6a47d86fb4c7c9c082f0f327f72862e76464bf914a71cb3bdb660de67",
        "checked": "2026-10-11",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  },
  "metadata": {
    "specs": {
      "Manufacturer": "Texas Instruments",
      "Package": "TSSOP-16",
      "Category": "Interface",
      "Pins": "16"
    }
  },
  "variants": [],
  "sections": [
    "hero",
    "viewers",
    "readme",
    "breadcrumbs",
    "info"
  ],
  "discovery_triggers": [
    "max202ipwr"
  ],
  "discovery_pitch": "MAX202IPWR (Texas Instruments) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
  "author": {
    "name": "Ray"
  },
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "max202ipwr.kicad_sym",
    "max202ipwr.kicad_mod",
    "max202ipwr.glb",
    "max202ipwr.step",
    "max202ipwr.lbr",
    "docs/hero.png",
    "docs/max202ipwr-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "max202ipwr-hero.glb",
    "max202ipwr-hero.overlay.json"
  ],
  "visibility": {
    "public": true
  }
}