MAX202EIN

{
 "schema": "adom.pads/1",
 "slug": "max202ein",
 "footprint": "DIP-16_W7.62mm",
 "generated_from": {
  "footprint": "DIP-16_W7.62mm@sha256:d9f5f5a3dbebef05",
  "pins": "page.json:component.pins",
  "overrides": null
 },
 "pin1": {
  "pad": "1",
  "at": [
   0.0,
   0.0
  ],
  "corner": "bottom-right",
  "source": "fab-chamfer",
  "derived_from": "DIP-16_W7.62mm@sha256:d9f5f5a3dbebef05"
 },
 "pad_count": 16,
 "symbol_pins": [
  "1",
  "10",
  "11",
  "12",
  "13",
  "14",
  "15",
  "16",
  "2",
  "3",
  "4",
  "5",
  "6",
  "7",
  "8",
  "9"
 ],
 "paste_apertures": 0,
 "issues": [],
 "pads": [
  {
   "pad": "1",
   "kind": "thru_hole",
   "shape": "roundrect",
   "at": [
    0.0,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.6,
    1.6
   ],
   "layers": [],
   "thermal": false,
   "pin": "1",
   "name": "C1+",
   "type": "passive",
   "description": "Positive terminal of charge-pump flying capacitor C1 (0.1 µF, 16 V). Connect to pin 3 (C1-) with a ceramic capacitor.",
   "is_pin1": true,
   "source": {
    "geometry": "DIP-16_W7.62mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "2",
   "kind": "thru_hole",
   "shape": "circle",
   "at": [
    0.0,
    2.54
   ],
   "rot": 0.0,
   "size": [
    1.6,
    1.6
   ],
   "layers": [],
   "thermal": false,
   "pin": "2",
   "name": "V+",
   "type": "power_out",
   "description": "Positive charge-pump output, nominally +10 V (VCC-0.3 V to 14 V absolute max). Bypass to GND with a 0.1-µF capacitor (6.3 V or higher).",
   "is_pin1": false,
   "source": {
    "geometry": "DIP-16_W7.62mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "3",
   "kind": "thru_hole",
   "shape": "circle",
   "at": [
    0.0,
    5.08
   ],
   "rot": 0.0,
   "size": [
    1.6,
    1.6
   ],
   "layers": [],
   "thermal": false,
   "pin": "3",
   "name": "C1-",
   "type": "passive",
   "description": "Negative terminal of charge-pump flying capacitor C1 (0.1 µF). Connect to pin 1 (C1+).",
   "is_pin1": false,
   "source": {
    "geometry": "DIP-16_W7.62mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "4",
   "kind": "thru_hole",
   "shape": "circle",
   "at": [
    0.0,
    7.62
   ],
   "rot": 0.0,
   "size": [
    1.6,
    1.6
   ],
   "layers": [],
   "thermal": false,
   "pin": "4",
   "name": "C2+",
   "type": "passive",
   "description": "Positive terminal of charge-pump flying capacitor C2 (0.1 µF, 16 V). Connect to pin 5 (C2-).",
   "is_pin1": false,
   "source": {
    "geometry": "DIP-16_W7.62mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "5",
   "kind": "thru_hole",
   "shape": "circle",
   "at": [
    0.0,
    10.16
   ],
   "rot": 0.0,
   "size": [
    1.6,
    1.6
   ],
   "layers": [],
   "thermal": false,
   "pin": "5",
   "name": "C2-",
   "type": "passive",
   "description": "Negative terminal of charge-pump flying capacitor C2 (0.1 µF). Connect to pin 4 (C2+).",
   "is_pin1": false,
   "source": {
    "geometry": "DIP-16_W7.62mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "6",
   "kind": "thru_hole",
   "shape": "circle",
   "at": [
    0.0,
    12.7
   ],
   "rot": 0.0,
   "size": [
    1.6,
    1.6
   ],
   "layers": [],
   "thermal": false,
   "pin": "6",
   "name": "V-",
   "type": "power_out",
   "description": "Negative charge-pump output, nominally -10 V (-14 V to 0.3 V absolute max). Bypass to GND with a 0.1-µF capacitor (16 V).",
   "is_pin1": false,
   "source": {
    "geometry": "DIP-16_W7.62mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "7",
   "kind": "thru_hole",
   "shape": "circle",
   "at": [
    0.0,
    15.24
   ],
   "rot": 0.0,
   "size": [
    1.6,
    1.6
   ],
   "layers": [],
   "thermal": false,
   "pin": "7",
   "name": "DOUT2",
   "type": "output",
   "description": "RS-232 driver 2 output. Inverted TTL/CMOS input from DIN2; swings between V+ and V- (nominally ±10 V) with ≥30-V/µs slew rate. ±15-kV HBM ESD-protected RS-232 bus pin.",
   "is_pin1": false,
   "source": {
    "geometry": "DIP-16_W7.62mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "8",
   "kind": "thru_hole",
   "shape": "circle",
   "at": [
    0.0,
    17.78
   ],
   "rot": 0.0,
   "size": [
    1.6,
    1.6
   ],
   "layers": [],
   "thermal": false,
   "pin": "8",
   "name": "RIN2",
   "type": "input",
   "description": "RS-232 receiver 2 input. Accepts ±30-V RS-232 levels with ~5-kΩ input resistance and hysteresis (VIT+ typ 1.7 V, VIT- typ 1.2 V). ±15-kV HBM ESD-protected RS-232 bus pin.",
   "is_pin1": false,
   "source": {
    "geometry": "DIP-16_W7.62mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "9",
   "kind": "thru_hole",
   "shape": "circle",
   "at": [
    7.62,
    17.78
   ],
   "rot": 0.0,
   "size": [
    1.6,
    1.6
   ],
   "layers": [],
   "thermal": false,
   "pin": "9",
   "name": "ROUT2",
   "type": "output",
   "description": "TTL/CMOS receiver 2 output (inverted from RIN2). Swings from GND to near VCC; drives host UART RX.",
   "is_pin1": false,
   "source": {
    "geometry": "DIP-16_W7.62mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "10",
   "kind": "thru_hole",
   "shape": "circle",
   "at": [
    7.62,
    15.24
   ],
   "rot": 0.0,
   "size": [
    1.6,
    1.6
   ],
   "layers": [],
   "thermal": false,
   "pin": "10",
   "name": "DIN2",
   "type": "input",
   "description": "TTL/CMOS driver 2 input. VIH ≥ 2 V, VIL ≤ 0.8 V; drives DOUT2 (inverted) to RS-232 levels.",
   "is_pin1": false,
   "source": {
    "geometry": "DIP-16_W7.62mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "11",
   "kind": "thru_hole",
   "shape": "circle",
   "at": [
    7.62,
    12.7
   ],
   "rot": 0.0,
   "size": [
    1.6,
    1.6
   ],
   "layers": [],
   "thermal": false,
   "pin": "11",
   "name": "DIN1",
   "type": "input",
   "description": "TTL/CMOS driver 1 input. VIH ≥ 2 V, VIL ≤ 0.8 V; drives DOUT1 (inverted) to RS-232 levels.",
   "is_pin1": false,
   "source": {
    "geometry": "DIP-16_W7.62mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "12",
   "kind": "thru_hole",
   "shape": "circle",
   "at": [
    7.62,
    10.16
   ],
   "rot": 0.0,
   "size": [
    1.6,
    1.6
   ],
   "layers": [],
   "thermal": false,
   "pin": "12",
   "name": "ROUT1",
   "type": "output",
   "description": "TTL/CMOS receiver 1 output (inverted from RIN1). Swings from GND to near VCC; drives host UART RX.",
   "is_pin1": false,
   "source": {
    "geometry": "DIP-16_W7.62mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "13",
   "kind": "thru_hole",
   "shape": "circle",
   "at": [
    7.62,
    7.62
   ],
   "rot": 0.0,
   "size": [
    1.6,
    1.6
   ],
   "layers": [],
   "thermal": false,
   "pin": "13",
   "name": "RIN1",
   "type": "input",
   "description": "RS-232 receiver 1 input. Accepts ±30-V RS-232 levels with ~5-kΩ input resistance and hysteresis (VIT+ typ 1.7 V, VIT- typ 1.2 V). ±15-kV HBM ESD-protected RS-232 bus pin.",
   "is_pin1": false,
   "source": {
    "geometry": "DIP-16_W7.62mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "14",
   "kind": "thru_hole",
   "shape": "circle",
   "at": [
    7.62,
    5.08
   ],
   "rot": 0.0,
   "size": [
    1.6,
    1.6
   ],
   "layers": [],
   "thermal": false,
   "pin": "14",
   "name": "DOUT1",
   "type": "output",
   "description": "RS-232 driver 1 output. Inverted TTL/CMOS input from DIN1; swings between V+ and V- (nominally ±10 V) with ≥30-V/µs slew rate. ±15-kV HBM ESD-protected RS-232 bus pin.",
   "is_pin1": false,
   "source": {
    "geometry": "DIP-16_W7.62mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "15",
   "kind": "thru_hole",
   "shape": "circle",
   "at": [
    7.62,
    2.54
   ],
   "rot": 0.0,
   "size": [
    1.6,
    1.6
   ],
   "layers": [],
   "thermal": false,
   "pin": "15",
   "name": "GND",
   "type": "power_in",
   "description": "Device ground / signal reference for all voltages.",
   "is_pin1": false,
   "source": {
    "geometry": "DIP-16_W7.62mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  },
  {
   "pad": "16",
   "kind": "thru_hole",
   "shape": "circle",
   "at": [
    7.62,
    0.0
   ],
   "rot": 0.0,
   "size": [
    1.6,
    1.6
   ],
   "layers": [],
   "thermal": false,
   "pin": "16",
   "name": "VCC",
   "type": "power_in",
   "description": "+5-V supply input (recommended 4.5 V to 5.5 V, absolute max 6 V). Typical ICC ≈ 8 mA (no load, 15 mA max). Bypass to GND with at least 0.1 µF.",
   "is_pin1": false,
   "source": {
    "geometry": "DIP-16_W7.62mm.kicad_mod",
    "meaning": "page.json:component.pins",
    "correspondence": "kicad: symbol pin number == pad name"
   }
  }
 ]
}