main
History Download
Ray Publish 0.1.0 3b90421

MAX17644CATE+

Analog Devices Inc./Maxim Integrated · DC-DC Converters · TQFN-16(3x3)

MAX17644CATE+ from Analog Devices Inc./Maxim Integrated, in a TQFN-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN/UVLO input Enable/undervoltage lockout input: drive high to enable the output, connect to a VIN-SGND resistor-divider center to set the turn-on input voltage, tie to VIN for always-on, pull below VENF to disable.
2 VCC power_out 5V LDO output that must be bypassed with a 2.2μF ceramic capacitor to SGND and does not support external loading.
3 SGND power_in Signal ground.
4 MODE/SYNC input Selects PWM (tie to SGND), PFM (open) or DCM (tie to VCC) operation and accepts an external clock for synchronization.
5 SS passive Soft-start input: connect a capacitor from SS to SGND to set the soft-start time.
6 FB input Feedback input: for MAX17644C connect to the center of an external resistor-divider from VOUT to SGND to set the output voltage (A/B variants connect directly to VOUT).
7 RT passive Programmable switching frequency input: a resistor to SGND sets 400kHz to 2.2MHz, leave unconnected for the default 400kHz.
8 RESET output Open-drain reset output driven low if FB drops below 92% of its set value and released 1024 cycles after FB rises above 95%.
9 EXTVCC power_in External supply input that reduces internal LDO loss; connect to the buck output only when programmed to 5V, otherwise connect to SGND.
10 BST passive Boost flying capacitor pin: connect a 0.1μF ceramic capacitor between BST and LX.
11 LX output Switching node pin connected to the switching side of the inductor.
12 LX output Switching node pin connected to the switching side of the inductor.
13 PGND power_in Power ground pin of the converter.
14 PGND power_in Power ground pin of the converter.
15 VIN power_in Power-supply input, 4.5V to 36V, decoupled to PGND with a 2.2μF capacitor placed close to the pins.
16 VIN power_in Power-supply input, 4.5V to 36V, decoupled to PGND with a 2.2μF capacitor placed close to the pins.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Analog Devices Inc./Maxim Integrated
Package TQFN-16(3x3)
Category Power Management
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input-Voltage Range VIN 4.5 36 V 2
Input-Shutdown Current IIN-SH 2.8 4.5 μA VEN/UVLO = 0V (Shutdown mode) 2
Input-Quiescent Current DCM IQ_DCM 1.2 1.8 mA DCM Mode, VLX = 0.1V 3
EN/UVLO Threshold Rising VENR 1.19 1.215 1.26 V VEN/UVLO rising 3
EN/UVLO Threshold Falling VENF 1.068 1.09 1.131 V VEN/UVLO falling 3
EN Input-Leakage Current IEN -50 0 50 nA VEN/UVLO = 0V, TA = +25ºC 3
VCC Output-Voltage Range VCC 4.75 5 5.25 V 1mA ≤ IVCC ≤ 15mA 3
VCC UVLO Rising VCC_UVR 4.05 4.2 4.3 V VCC rising 3
VCC UVLO Falling VCC_UVF 3.65 3.8 3.9 V VCC falling 3
EXTVCC Switchover Threshold Rising VEXTVCC 4.56 4.7 4.84 V VEXTVCC rising 3
EXTVCC Switchover Threshold Falling VEXTVCC 4.3 4.45 4.6 V VEXTVCC falling 3
High-Side nMOS On-Resistance RDS-ONH 125 250 mΩ ILX = 0.3A, sourcing 3
Low-Side nMOS On-Resistance RDS-ONL 80 160 mΩ ILX = 0.3A, sinking 3
LX Leakage Current ILX_LKG -2 3 μA VLX = (VPGND +1V) to (VIN - 1V), TA = +25°C 3
Soft-Start Charging Current ISS 4.7 5 5.3 μA VSS = 0.5V 3
FB Regulation Voltage VFB-REG 0.889 0.9 0.911 V MODE/SYNC = SGND or MODE/SYNC = VCC for MAX17644C 4
FB Regulation Voltage VFB-REG 0.89 0.915 0.936 V MODE/SYNC = Unconnected for MAX17644C 4
FB Input-Bias Current IFB -50 50 nA 0 ≤ VFB ≤ 1V, TA = 25ºC For MAX17644C 4
SYNC Pulse Width 50 ns 4
SYNC Threshold High VIH 2.1 V 4
SYNC Threshold Low VIL 0.8 V 4
Peak Current-Limit Threshold IPEAK-LIMIT 3.45 4 4.6 A 4
Runaway Peak Current-Limit Threshold IRUNAWAY-LIMIT 4 4.7 5.3 A 4
Valley Current-Limit Threshold IVALLEY-LIMIT -0.15 0 0.15 A MODE/SYNC = Unconnected or MODE/SYNC = VCC 4
Switching Frequency fSW 380 400 420 kHz RRT = 50.8kΩ 5
Switching Frequency fSW 475 500 525 kHz RRT = 40.2kΩ 5
Switching Frequency fSW 1950 2200 2450 kHz RRT = 8.06kΩ 5
Switching Frequency fSW 370 400 430 kHz RRT = Unconnected 5
VFB Undervoltage Trip Level to Cause Hiccup VFB-HICF 0.56 0.58 0.6 V For MAX17644C 5
Minimum On-Time tON-MIN 52 80 ns 5
Minimum Off-Time tOFF-MIN 140 160 ns 5
RESET Output-Level Low VRESETL 400 mV IRESET = 10mA 5
RESET Output-Leakage Current IRESETLKG -100 100 nA TA = TJ = 25ºC, VRESET = 5.5V 5
FB Threshold for RESET Deassertion VFB-OKR 93.8 95 97.8 % VFB rising 5
FB Threshold for RESET Assertion VFB-OKF 90.5 92 94.6 % VFB falling 5
VIN to PGND VIN -0.3 40 V 2
EN/UVLO to SGND -0.3 V max VIN + 0.3V 2
LX to PGND -0.3 V max VIN + 0.3V 2
EXTVCC to SGND -5.5 6.5 V 2
BST to PGND -0.3 46.5 V 2
BST to LX -0.3 6.5 V 2
BST to VCC -0.3 40 V 2
RESET, SS, MODE/SYNC, VCC, RT to SGND -0.3 6.5 V 2
FB to SGND (MAX17644C) -0.3 6.5 V 2
PGND to SGND -0.3 0.3 V 2
LX Total RMS Current -3.5 3.5 A printed ±3.5A 2
Operating Temperature Range -40 125 °C Note 1 2
Junction Temperature TJ 150 °C 2
Storage Temperature Range -65 150 °C 2
Lead Temperature 300 °C soldering, 10s 2
Soldering Temperature 260 °C reflow 2
Junction to Ambient Thermal Resistance θJA 33 °C/W Four-layer board, 16-pin TQFN 2
Junction to Case Thermal Resistance θJC 4 °C/W Four-layer board, 16-pin TQFN 2
PFM Peak Current-Limit Threshold IPFM 1 A MODE/SYNC = Unconnected 4
Thermal-Shutdown Threshold 165 °C Temperature rising 5
Thermal-Shutdown Hysteresis 10 °C 5

CAD (KiCad official)

  • Symbol: MAX17644CATE+
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: TQFN-16(3x3) (KiCad packages3D, STEP)
  • 3D model files: max17644cate-etched.step / max17644cate-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max17644cate.step / max17644cate.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices Inc./Maxim Integrated datasheet (25 pp, sha256 a89fd1616e3bb9cc, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF