MAX15062BATA+T

{
  "slug": "max15062bata-t",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Inc Maxim Integrated Global Sourcing Parts, WDFN-8(2x2). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "global sourcing parts",
    "max15062bata+t",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "max15062bata-t.kicad_sym",
    "max15062bata-t.kicad_mod",
    "max15062bata-t.glb",
    "max15062bata-t.step",
    "max15062bata-t.lbr",
    "docs/hero.png",
    "docs/max15062bata-t-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "max15062bata-t-hero.glb",
    "max15062bata-t-hero.overlay.json",
    "max15062bata-t-etched.glb"
  ],
  "component": {
    "mpn": "MAX15062BATA+T",
    "manufacturer": "Analog Devices Inc Maxim Integrated",
    "package": "WDFN-8(2x2)",
    "pin_count": 9,
    "category": "Global Sourcing Parts",
    "subcategory": "Global Sourcing Parts",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588881809513304064",
    "parts": {
      "symbol": "max15062bata-t.kicad_sym",
      "footprint": "max15062bata-t.kicad_mod",
      "model_3d": "max15062bata-t-hero.glb",
      "model_3d_plain": "max15062bata-t-etched.glb",
      "model_3d_step": "max15062bata-t-etched.step",
      "model_3d_step_plain": "max15062bata-t.step",
      "lbr": "max15062bata-t.lbr"
    },
    "distributor_links": {
      "lcsc": "C143362",
      "digikey": "MAX15062BATA+TTR-ND",
      "mouser": "700-MAX15062BATA+T"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T04:16:45Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "MAX15062BATA+TTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "700-MAX15062BATA+T",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "VIN",
        "type": "power_in",
        "description": "Switching regulator power input, specified for a 4.5V to 60V input range; bypass VIN to GND with an X7R 1µF ceramic capacitor."
      },
      {
        "number": "2",
        "name": "EN/UVLO",
        "type": "input",
        "description": "Active-high enable/undervoltage-detection input; pull to GND to disable the regulator output, connect to VIN for always-on operation, or use a resistor divider from VIN to program the turn-on input voltage."
      },
      {
        "number": "3",
        "name": "VCC",
        "type": "power_out",
        "description": "Internal LDO power output that must be bypassed to GND with a minimum 1µF capacitor."
      },
      {
        "number": "4",
        "name": "FB/VOUT",
        "type": "input",
        "description": "Feedback input; connect directly to the output for fixed-voltage versions, or to a resistor divider between VOUT and GND to set the adjustable output from 0.9V to 0.89 x VIN."
      },
      {
        "number": "5",
        "name": "MODE",
        "type": "input",
        "description": "PFM/PWM mode selection input; connect to GND for fixed-frequency PWM operation, or leave unconnected for light-load PFM operation."
      },
      {
        "number": "6",
        "name": "RESET",
        "type": "output",
        "description": "Open-drain reset output that must be pulled up to an external supply through a resistor; it goes low when the output drops below 92% of the nominal regulated voltage and goes high impedance 2ms after the output rises above 95% of regulation."
      },
      {
        "number": "7",
        "name": "GND",
        "type": "power_in",
        "description": "Ground; connect to the power ground plane and join all circuit ground connections at a single point."
      },
      {
        "number": "8",
        "name": "LX",
        "type": "output",
        "description": "Inductor connection to the switching side of the inductor; LX is high impedance when the device is in shutdown."
      },
      {
        "number": "9",
        "name": "EP",
        "type": "passive",
        "description": "Exposed pad (from the footprint; not named in the datasheet pin table)."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The ordering table lists the part as MAX15062BATA+ (8 TDFN, 5V output, -40°C to +125°C). The request; The pin configuration in the extracted text is a scrambled top-view diagram. Pin numbers were assign",
          "exposed pad 9 added from the footprint"
        ],
        "pages_sent": 6,
        "cost_usd": 0.044,
        "at": "2026-10-18T04:12:59"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588881809513304064",
        "pages": 23,
        "sha256": "ffeeecba16f5442d",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 9,
        "described": 9,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "max15062bata-t.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.02,
          2.0,
          0.75
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "e0b8005cb8b418c20fbc50176aedb7f8c7721def28610152cb62d25f24a2dc38",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "max15062bata-t-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          2.02,
          2.0,
          0.75
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "1cd5d695e08c8fede37357f013fd6e8cf3a9f744980ae3f54eed3742176100e7",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}