main
Ray Publish 0.1.0 9be47ec 17h ago

MAX1487ESA-HXY

HXY MOSFET · RS-485/RS-422 ICs · SOP-8

MAX1487ESA-HXY from HXY MOSFET, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver output, which is logic high when A-B is at least +0.2V or the inputs are open, logic low when A-B is at most -0.2V, and high impedance when RE is high.
2 RE input Active-low receiver enable input; drive low to enable the receiver output, high to place RO in high impedance (VIL max 0.8V, VIH min 2.0V).
3 DE input Driver enable input; high enables the driver outputs A and B, low places them in high impedance (VIL max 0.8V, VIH min 2.0V).
4 DI input Driver input; with DE high a low on DI forces A low and B high, and a high on DI forces A high and B low (VIL max 0.8V, VIH min 2.0V).
5 GND power_in Ground.
6 A bidirectional Non-inverting RS-485/RS-422 receiver input and driver output, rated -8V to +12.5V with ±15kV HBM ESD protection.
7 B bidirectional Inverting RS-485/RS-422 receiver input and driver output, rated -8V to +12.5V with ±15kV HBM ESD protection.
8 VCC power_in Positive supply input, operated from a single +5V ±5% supply with a 0.1µF bypass capacitor and an absolute maximum of 12V.

Key specifications

Parameter Value
Manufacturer HXY MOSFET
Package SOP-8
Category Communication Interface Chip
Pins 8

CAD (KiCad official)

  • Symbol: MAX1487ESA-HXY
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: max1487esa-hxy-etched.step / max1487esa-hxy-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max1487esa-hxy.step / max1487esa-hxy.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: HXY MOSFET datasheet (9 pp, sha256 833bacfdacfa52dd, retrieved 2026-10-27, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF