main
History Download
Ray Publish 0.1.0 eac3dcb

MAX1487EESA+T

Analog Devices Inc Maxim Integrated · RS-485 / RS-422 ICs · SOIC-8

MAX1487EESA+T from Analog Devices Inc Maxim Integrated, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver output: goes high if A > B by 200mV and low if A < B by 200mV.
2 RE input Receiver output enable: RO is enabled when RE is low and is high impedance when RE is high.
3 DE input Driver output enable: the driver outputs are enabled by bringing DE high and are high impedance when DE is low.
4 DI input Driver input: a low on DI forces output Y (A) low and output Z (B) high, and a high on DI forces Y (A) high and Z (B) low.
5 GND power_in Ground reference for the device.
6 A bidirectional Noninverting receiver input and noninverting driver output (RS-485 bus line A).
7 B bidirectional Inverting receiver input and inverting driver output (RS-485 bus line B).
8 VCC power_in Positive supply: 4.75V ≤ VCC ≤ 5.25V.

Key specifications

Parameter Value
Manufacturer Analog Devices Inc Maxim Integrated
Package SOIC-8
Category Interface
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Receiver Output Low Voltage VOL 0.4 V IO = 4mA, VID = -200mV 2
Receiver Output High Voltage VOH 3.5 V IO = -4mA, VID = 200mV 2
Driver Common-Mode Output Voltage VOC 3 V R = 27Ω or 50Ω, Figure 8 2
Change in Magnitude of Driver Differential Output Voltage for Complementary Output States ΔVOD 0.2 V R = 27Ω or 50Ω, Figure 8 2
Change in Magnitude of Driver Common-Mode Output Voltage for Complementary Output States ΔVOD 0.2 V R = 27Ω or 50Ω, Figure 8 2
Input High Voltage VIH 2 V DE, DI, RE 2
Input Low Voltage VIL 0.8 V DE, DI, RE 2
Input Current IIN1 -2 2 µA MAX487E/MAX1487E, DE = 0V, VCC = 0V or 5.25V 2
Differential Driver Output (no load) VOD1 5 V no load 2
Differential Driver Output (with load), RS-422 VOD2 1.5 5 V R = 50Ω (RS-422) 2
Differential Driver Output (with load), RS-485 VOD2 2 V R = 27Ω (RS-485), Figure 8 2
Receiver Differential Threshold Voltage VTH -0.2 0.2 V -7V ≤ VCM ≤ 12V 2
Receiver Input Resistance RIN 48 kΩ -7V ≤ VCM ≤ 12V, MAX487E/MAX1487E 2
Input Current (A, B) IIN2 0.25 mA VIN = 12V 2
Input Current (A, B) IIN2 -0.2 mA VIN = -7V 2
Three-State (high impedance) Output Current at Receiver IOZR -1 1 µA 0.4V ≤ VO ≤ 2.4V 2
Receiver Short-Circuit Current IOSR 7 95 mA 0V ≤ VO ≤ VCC 3
Driver Short-Circuit Current, VO = Low IOSD2 35 250 mA -7V ≤ VO ≤12V (Note 4) 3
Driver Short-Circuit Current, VO = High IOSD1 35 250 mA -7V ≤ VO ≤12V (Note 4) 3
No-Load Supply Current (Note 3) ICC 250 400 µA MAX1487E, RE = 0V or VCC, DE = 0V 3
No-Load Supply Current (Note 3) ICC 350 650 µA MAX1487E, RE = 0V or VCC, DE = VCC 3
Driver Rise or Fall Time tR, tF 3 20 40 ns Figures 10 and 12, RDIFF = 54Ω, CL1 = CL2 = 100pF 3
Driver Enable to Output High tZH 45 70 ns Figures 11 and 13 3
Driver Enable to Output Low tZL 45 70 ns Figures 11 and 13 3
Driver Disable Time from Low tLZ 45 70 ns Figures 11 and 13 3
Driver Disable Time from High tHZ 45 70 ns Figures 11 and 13 3
Driver Input to Output (low-to-high) tPLH 40 60 ns Figures 10 and 12, RDIFF = 54Ω, CL1 = CL2 = 100pF 3
Driver Input to Output (high-to-low) tPHL 40 60 ns Figures 10 and 12, RDIFF = 54Ω, CL1 = CL2 = 100pF 3
Driver Output Skew to Output tSKEW 5 10 ns Figures 10 and 12, RDIFF = 54Ω, CL1 = CL2 = 100pF 3
Receiver Enable to Output Low tZL 20 50 ns Figures 9 and 15, CRL = 15pF, S1 closed 3
Receiver Enable to Output High tZH 20 50 ns Figures 9 and 15, CRL = 15pF, S2 closed 3
Receiver Disable Time from Low tLZ 20 50 ns Figures 9 and 15, CRL = 15pF, S1 closed 3
Receiver Disable Time from High tHZ 20 50 ns Figures 9 and 15, CRL = 15pF, S2 closed 3
Maximum Data Rate fMAX 2.5 Mbps 3
Operating Temperature Range (MAX1487EE_A) TA -40 85 °C MAX1487EE_A 2
Supply Voltage VCC 12 V 2
Control Input Voltage (RE, DE) -0.5 V 2
Driver Input Voltage (DI) -0.5 V 2
Driver Output Voltage (Y, Z; A, B) -8 12.5 V 2
Receiver Input Voltage (A, B) -8 12.5 V 2
Receiver Output Voltage (RO) -0.5 V 2
Storage Temperature Range TSTG -65 160 °C 2
Lead Temperature (soldering, 10 sec) 300 °C soldering, 10sec 2

CAD (KiCad official)

  • Symbol: MAX1487EESA+T
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: max1487eesa-t-etched.step / max1487eesa-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max1487eesa-t.step / max1487eesa-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices Inc Maxim Integrated datasheet (16 pp, sha256 273f114f0ec895b5, retrieved 2026-10-19, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF