Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MAX14611ETD+T

Maxim Integrated · Translators / Level Shifters · TDFN-14-EP(3x3)

MAX14611ETD+T from Maxim Integrated, in a TDFN-14-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 I/OVL1 bidirectional Input/Output 1 is referenced to VL and level-translates data to the VCC side of the device.
2 I/OVL2 bidirectional Input/Output 2 is referenced to VL and level-translates data to the VCC side of the device.
3 TS input Three-State Select Input: drive TS low to place the device in three-state output mode, with I/OVCC_ and I/OVL_ high impedance; logic is referenced to VL.
4 N.C. unconnected No Connection; not internally connected.
5 I/OVL3 bidirectional Input/Output 3 is referenced to VL and level-translates data to the VCC side of the device.
6 I/OVL4 bidirectional Input/Output 4 is referenced to VL and level-translates data to the VCC side of the device.
7 GND power_in Ground.
8 I/OVCC4 bidirectional Input/Output 4 is referenced to VCC and level-translates data to the VL side of the device.
9 I/OVCC3 bidirectional Input/Output 3 is referenced to VCC and level-translates data to the VL side of the device.
10 VL power_in Logic Supply Voltage Input, 0.9V ≤ VL ≤ min(5.0V, VCC + 0.3V); connect a 0.1µF ceramic capacitor as close as possible to the pin.
11 N.C. unconnected No Connection; not internally connected.
12 I/OVCC2 bidirectional Input/Output 2 is referenced to VCC and level-translates data to the VL side of the device.
13 I/OVCC1 bidirectional Input/Output 1 is referenced to VCC and level-translates data to the VL side of the device.
14 VCC power_in Power Supply Input, 1.65V ≤ VCC ≤ 5.5V; bypass with a 1µF ceramic capacitor as close as possible to the pin to achieve higher ESD protection (≥6kV HBM).
15 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Maxim Integrated
Package TDFN-14-EP(3x3)
Category Logic ICs
Pins 15

CAD (KiCad official)

  • Symbol: MAX14611ETD+T
  • Footprint: Package_DFN_QFN:DFN-14-1EP_3x3mm_P0.4mm_EP1.78x2.35mm
  • 3D model: TDFN-14-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: max14611etd-t-etched.step / max14611etd-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max14611etd-t.step / max14611etd-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Maxim Integrated datasheet (15 pp, sha256 12a3e8a5a581fc37, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF