component
MAX13256ATB+T
Public Made by Adomby adom
Analog Devices Inc Maxim Integrated Isolators - Gate Drivers, TDFN-10-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownMAX13256ATB+T
Analog Devices Inc Maxim Integrated · Isolators - Gate Drivers · TDFN-10-EP(3x3)
MAX13256ATB+T from Analog Devices Inc Maxim Integrated, in a TDFN-10-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply input; bypass to ground with 1μF capacitor as close as possible to the device. |
| 2 | VDD | power_in | Power supply input; bypass to ground with 1μF capacitor as close as possible to the device. |
| 3 | CLK | input | Clock input; connect to GND for internal oscillator mode or apply external clock signal for external clocking mode. |
| 4 | EN | input | Enable input; drive low to enable the device, drive high to disable the device. |
| 5 | ITH | input | Overcurrent threshold adjustment input; connect external resistor RLIM from ITH to GND to set overcurrent threshold for ST1/ST2 outputs with maximum 10pF capacitance to ground. |
| 6 | FAULT | output | Fault open-drain output; asserts low when device detects overtemperature or overcurrent condition. |
| 7 | GND | power_in | Ground connection for signal and power references. |
| 8 | ST2 | output | Transformer drive output 2; provides H-bridge switching signal to transformer primary coil with up to 300mA output capability. |
| 9 | GND | power_in | Ground connection for signal and power references. |
| 10 | ST1 | output | Transformer drive output 1; provides H-bridge switching signal to transformer primary coil with up to 300mA output capability. |
| 11 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | TDFN-10-EP(3x3) |
| Category | Power Management (PMIC) |
| Pins | 11 |
CAD (KiCad official)
- Symbol:
MAX13256ATB+T - Footprint:
Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm - 3D model: TDFN-10-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
max13256atb-t-etched.step/max13256atb-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max13256atb-t.step/max13256atb-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc Maxim Integrated datasheet (23 pp, sha256
7617602ae33f3dd4, retrieved 2026-09-22, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).