component
MAX1044ESA
Public Made by Adomby adom
XBLW Charge Pumps, SOP-8. Datasheet-verified pinout, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads on click. Unloads only if this page sits in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads on click. Unloads only if this page sits in the background.
PCB Footprint
Open full view ↗Loads on click. Unloads only if this page sits in the background.
Datasheet
Open in new tab ↗Loads on click. Unloads only if this page sits in the background.
README
markdownMAX1044ESA
XBLW · Charge Pumps · SOP-8
MAX1044ESA from XBLW, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | BOOST | input | Oscillator frequency control input that increases internal oscillator frequency by a factor of 6 when connected to V+, or should be left open if using external oscillator. |
| 2 | CAP+ | passive | Negative terminal connection for the internal charge pump capacitor. |
| 3 | GND | power_in | Ground connection point; negative end of accumulator capacitor should be connected to this pin. |
| 4 | CAP- | passive | Positive terminal connection for the internal charge pump capacitor. |
| 5 | VOUT | power_out | Positive voltage output terminal rated for 0V to 9V; positive end of accumulator capacitor should be connected to this pin. |
| 6 | LV | input | Low voltage mode selection input that should be connected to ground when supply voltage is below 3.5V. |
| 7 | OSC | input | Oscillator frequency control input where an external capacitor reduces the internal oscillator frequency. |
| 8 | V+ | power_in | Power supply positive voltage input rated 1.5V to 9.0V; serves as chip substrate connection point. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | XBLW |
| Package | SOP-8 |
| Category | Power Management (PMIC) |
| Pins | 8 |
CAD (KiCad official)
- Symbol:
MAX1044ESA - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
max1044esa-etched.step/max1044esa-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max1044esa.step/max1044esa.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: XBLW datasheet (8 pp, sha256
ce69305916a3f1fd, retrieved 2026-09-21, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-4-6(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).