MAL216099702E3 - 100 uF 80 V SMD Aluminium Electrolytic Capacitor, 150 C

{
 "schema": "adom/mark-check@1",
 "step": "/home/adom/project/uta-dynos/work/pages/mal216099702e3/work/etch/mal216099702e3-etched.step",
 "mpn": "MAL216099702E3",
 "status": "WARN",
 "checks": [
  {
   "check": "axis",
   "status": "WARN",
   "detail": "Text runs across the 11.30 mm side; rerun with the planner default (along 11.30 mm).",
   "angleDeg": 90
  },
  {
   "check": "size",
   "status": "PASS",
   "detail": "text height 1.507 mm, 155% of what fits (0.972 mm), block fills 31% of the 11.30 mm band height",
   "capMm": 1.507,
   "fitMm": 0.9715
  },
  {
   "check": "band",
   "status": "PASS",
   "detail": "inside the usable band"
  },
  {
   "check": "flat",
   "status": "PASS",
   "detail": "flat, coplanar with the face (+5 um)"
  },
  {
   "check": "group",
   "status": "PASS",
   "detail": "Adom.LaserEtch group"
  },
  {
   "check": "colour",
   "status": "WARN",
   "detail": "dark mark: the rule is a flat white (light) mark; keep a dark one only on a light body (aluminium can, white LED housing) and say so",
   "rgb": [
    0.11,
    0.11,
    0.11
   ]
  },
  {
   "check": "widget",
   "status": "PASS",
   "detail": "15.0 px caps with the outline 320 px wide",
   "capHeightPx320": 15.0
  }
 ],
 "frame": {
  "reference": "normalized pose: footprint frame, X right, Y up, Z up off the board (after the stand-up turns)",
  "sourceToNormalized": {
   "turns": [],
   "text": "identity",
   "source": "--up z"
  },
  "normalizedToOutput": {
   "checkImage": {
    "turns": [
     {
      "axis": "z",
      "quarterTurns": 0
     }
    ],
    "text": "identity",
    "pose": "standard reading pose: reading direction to +X, text up +Y, pin 1 lower left"
   },
   "outline": {
    "turns": [
     {
      "axis": "z",
      "quarterTurns": 2
     }
    ],
    "text": "180 deg about Z",
    "pose": "iso outline from +X+Y+Z"
   }
  },
  "modelUp": {
   "supplied": true,
   "source": "--up z"
  },
  "packageFront": {
   "supplied": true,
   "face": "top",
   "source": "--face top"
  },
  "textUp": {
   "supplied": false,
   "vector": [
    -0.0,
    1.0,
    0.0
   ],
   "source": "inferred from pin 1: footprint pad 1"
  },
  "mountedPose": false,
  "summary": "frame: normalized pose (source -> normalized: identity, --up z; normalized -> check image: identity, -> outline: 180 deg about Z); model up supplied, face top supplied, text up inferred from pin 1; not a mounted-pose check"
 },
 "plan": {
  "summary": "Mark along the 11.30 mm axis (+X), 0.97 mm text (2 lines), upright with pin 1 left middle, outline rot 180 after a 180 deg pose turn; ~10 px caps at 320 px",
  "band": [
   -5.65,
   -5.65,
   5.65,
   5.65
  ],
  "readingDirection": [
   1.0,
   0.0,
   0.0
  ],
  "lines": [
   "MAL",
   "216099702E3"
  ]
 },
 "thresholds": {
  "sizePass": 0.8,
  "sizeFail": 0.6,
  "widgetPxPass": 6.0,
  "widgetPxFail": 4.0,
  "outlineOffsetMax": 0.15,
  "coplanarMaxMm": 0.02
 },
 "image": "mal216099702e3-etched.check.png",
 "reportPath": "mal216099702e3-etched.check.json"
}