MAL216099702E3 - 100 uF 80 V SMD Aluminium Electrolytic Capacitor, 150 C

{
 "schema": "adom/mark-plan@1",
 "mpn": "MAL216099702E3",
 "step": "/home/adom/project/uta-dynos/work/pages/mal216099702e3/work/mal216099702e3.step",
 "footprint": "/home/adom/project/uta-dynos/work/pages/mal216099702e3/work/mal216099702e3.kicad_mod",
 "standUp": [
  {
   "axis": "x",
   "quarterTurns": 1
  }
 ],
 "standUpSource": "STEP up-axis hint (Y-up model stood up)",
 "inputs": {
  "up": "auto",
  "face": "auto",
  "along": null,
  "upSupplied": false,
  "faceSupplied": false,
  "faceSource": "inferred: top face"
 },
 "face": "top",
 "pin1": {
  "source": "footprint pad 1",
  "xyMm": [
   -5.15,
   -0.0
  ],
  "corner": "left/upper"
 },
 "existingMarks": [],
 "vendorMarking": {
  "present": false,
  "glyphFaces": 0
 },
 "faceNormal": [
  0,
  0,
  1
 ],
 "longAxis": {
  "axis": "x",
  "vector": [
   1.0,
   0.0,
   0.0
  ],
  "why": "longest usable top dimension (3.60 mm vs 0.30 mm)",
  "source": "longest",
  "override": null,
  "pinRows": null
 },
 "readingDirection": {
  "vector": [
   1.0,
   0.0,
   0.0
  ],
  "angleDeg": 0,
  "textUp": [
   -0.0,
   1.0,
   0.0
  ],
  "rule": "pin 1 / pad 1 at the start (left) of the text, and below it when it sits on a side"
 },
 "band": {
  "regionMm": [
   -1.8,
   -0.3,
   1.8,
   0.0
  ],
  "zMm": 6.2,
  "lengthMm": 3.6,
  "heightMm": 0.3,
  "why": "largest flat face near the top (none covers the centre)",
  "terminationsExcludedBy": null,
  "trimmedEnds": [],
  "keepouts": [],
  "sideTurn": null,
  "margins": {
   "lengthEachSide": 0.12,
   "heightEachSide": 0.15
  }
 },
 "text": {
  "lines": [
   "MAL2160",
   "99702E3"
  ],
  "chars": 14,
  "capHeightMm": 0.21,
  "smallestLineMm": 0.21,
  "heightPctOfBand": 70.0,
  "why": "one line (two lines would give 0.091 mm on the smaller line, not 1.15x larger)",
  "alternative": {
   "lines": [
    "MAL",
    "216099702E3"
   ],
   "capHeightMm": 0.0913,
   "smallestLineMm": 0.0913
  },
  "font": "service-step2glb /laser-etch (single-stroke outline font)"
 },
 "etch": {
  "poseQuarterTurnsZ": 0,
  "service": "/laser-etch?mode=flat",
  "note": "turn so the reading direction is +X, etch, fit the mark into the band, turn back"
 },
 "outline": {
  "upAxis": "z",
  "poseRotZDeg": 180,
  "rot": 180,
  "recipe": "adom-aiflow-etch outline <part.step> --footprint <part.kicad_mod> --mpn MAL216099702E3 (stands the STEP up (STEP up-axis hint (Y-up model stood up)), turns it 180 deg about Z and draws MAL216099702E3 on the planned band, rot 180)",
  "why": "iso camera looks from +X+Y+Z: text along +Y (rot 90) or -X (rot 180) reads left to right with pin 1 toward the viewer"
 },
 "widget": {
  "px": 320,
  "pxPerMm": 12.76,
  "capHeightPx": 2.2
 },
 "hints": [],
 "warnings": [
  "pin 1 lands UPPER-left in the standard pose (left/upper): the pads are numbered clockwise; check the footprint is not mirrored and the model matches it"
 ],
 "summary": "Mark along the 3.60 mm axis (+X), 0.21 mm text, upright with pin 1 left upper, outline rot 180 after a 180 deg pose turn; ~2 px caps at 320 px"
}