MachineContactMedium - Medium Machine Contact

{
  "mpn": "MachineContactMedium",
  "wiki": "https://wiki.adom.inc/adom/machinecontactmedium",
  "source": "/home/adom/aiflow-esc-astra/components/quality-audit/provenance-snapshots/adom__machinecontactmedium/MachineContactMedium.step",
  "sourceSha256": "cba9913901864710d26b819bad6913aa2e4e9a1dd8d9143de9bdde3cabc19279",
  "processingInputSha256": "cba9913901864710d26b819bad6913aa2e4e9a1dd8d9143de9bdde3cabc19279",
  "rotationDegrees": 0,
  "restoredOriginalFrame": true,
  "text": "MachineContactMedium",
  "mode": "flat",
  "classification": "source-derived identification variant; marking geometry generated by Adom STEP engine",
  "generator": "Adom STEP engine 1.3.0 f02d0909",
  "reusedReviewedCache": false,
  "job": {
    "ok": true,
    "job_id": "ae4077ce339ea589",
    "status": "queued",
    "poll": "/jobs/ae4077ce339ea589",
    "result_type": "application/step",
    "client": "astra-esc-mpn",
    "job_name": "machinecontactmedium-long-axis"
  },
  "plainBoundsMm": {
    "xmin": -0.43500010000000006,
    "xmax": 0.43500010000000006,
    "ymin": -0.4350000994414395,
    "ymax": 0.43500009944143947,
    "zmin": -1.6500000000000021,
    "zmax": 0.0,
    "xlen": 0.8700002000000001,
    "ylen": 0.8700001988828789,
    "zlen": 1.6500000000000021
  },
  "markedBoundsMm": {
    "xmin": -0.43500010000000006,
    "xmax": 0.43500010000000006,
    "ymin": -0.4350000994410004,
    "ymax": 0.4350000994410004,
    "zmin": -1.6500000000000674,
    "zmax": 0.0,
    "xlen": 0.8700002000000001,
    "ylen": 0.8700001988820008,
    "zlen": 1.6500000000000674
  },
  "step": "/home/adom/aiflow-esc-astra/components/quality-audit/all-marked/machinecontactmedium/machinecontactmedium-mpn.step",
  "stepSha256": "92b59b6ed432f5e1f415f1e1bce8ad2527ad40e624548924b62d0bc1a3b1d558",
  "limitations": "Identification aid, not factory marking or dimensional qualification. Tiny passives require zoom. Original geometry provenance and rights remain those of the source.",
  "review": "Contact sheet and representative closeups reviewed; geometric fit checked; native board check reported on ESC project",
  "surfaceFit": {
    "fittedTextBoundsMm": [
      0.016845959838183277,
      0.24359999999999998,
      0.001
    ],
    "textCenterMm": [
      -0.4002,
      0.0,
      0.0005
    ],
    "textRotationDegrees": 270,
    "generatedTextScale": 0.10183147843421643,
    "fitRule": "Largest sampled rectangle on upper planar body face (including body below raised terminals); 86% length and 70% width maximum, both orientations compared; 1um identification geometry; sampled face containment excludes holes",
    "plainGeometryPreserved": "Original assembly retained; only separate text group added"
  },
  "colorPreservingDocument": true,
  "fitRevision": 2,
  "localGlyphFallback": false,
  "glb": "/home/adom/aiflow-esc-astra/components/quality-audit/all-marked/machinecontactmedium/machinecontactmedium-mpn.glb",
  "glbSha256": "53124f36271b34bf3485b47185e05d1a148bb49613713edf3856a76f1de253e0",
  "png": "/home/adom/aiflow-esc-astra/components/quality-audit/all-marked/machinecontactmedium/machinecontactmedium-mpn.png",
  "pngSha256": "bad193612f040102a1a92e1abcd99a0faca64ab941d4877b038b786e58b49d09",
  "publishedUtc": "2026-09-16T22:47:22.569683+00:00",
  "combinedModelPublished": true,
  "redistributionEvidence": "Adom-owned source model. Adom CEO explicitly authorized publication of these MPN-marked derivatives on 2026-09-16; see ADOM-ASSET-PERMISSION.md and adom-asset-authorization.json. Original package license is retained; this records additional permission for the marked variant, not a replacement blanket license.",
  "sourceFileHeader": "ISO-10303-21;\nHEADER;\n/* Generated by software containing ST-Developer\n * from STEP Tools, Inc. (www.steptools.com) \n */\n\nFILE_DESCRIPTION(\n/* description */ (''),\n/* implementation_level */ '2;1');\n\nFILE_NAME(\n/* name */ 'MediumMachineContact v1.step',\n/* time_stamp */ '2024-01-24T14:54:37-05:00',\n/* author */ (''),\n/* organization */ (''),\n/* preprocessor_version */ 'ST-DEVELOPER v20',\n/* originating_system */ 'Autodesk Translation Framework v12.14.0.127',\n\n/* authorisation */ '');\n\nFILE_SCHEMA (('AUTOMOTIVE_DESIGN { 1 0 10303 214 3 1 1 }'));\nENDSEC;\n\nDATA;\n#10=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#13),#1643);\n#11=SHAPE_REPRESENTATION_RELATIONSHIP('SRR','None',#1650,#12);\n#12=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#14),#1642);\n#13=STYLED_ITEM('',(#1659),#14);\n#14=MANIFOLD_SOLID_BREP('Body1',#585);\n#15=ELLIPSE('',#613,0.123303040813508,0.117733653429061);\n#16=ELLIPSE('',#617,0.123303040810181,0.117733653427394);\n#17=ELLIPSE('',#621,0.123300822678697,0.117732417193227);\n#18=ELLIPSE('',#624,0.12330082267097,0.117732417188975);\n#19=ELLIPSE('',#626,0.0946949526236447,0.0904878540173368);\n#20=ELLIPSE('',#627,0.0946949527732227,0.0904878541006801);\n#21=ELLIPSE('',#640,0.0947014027658022,0.0904914268414502);\n#22=ELLIPSE('',#641,0.0947013568795386,0.0904914015032144);\n#23=ELLIPSE('',#648,0.0947014129570492,0.0904914324665984);\n#24=ELLIPSE('',#651,0.0946959223869005,0.0904883921275694);\n#25=ELLIPSE('',#654,0.0947012752311686,0.09049135641962);\n#26=ELLIPSE('',#655,0.0946959221538525,0.0904883919975931);\n#27=CONICAL_SURFACE('',#611,0.3500599520011,0.140686945962564);\n#28=CONICAL_SURFACE('',#614,0.3500599520011,0.140686945962564);\n#29=CONICAL_SURFACE('',#618,0.3500599520011,0.140686945962564);\n#30=CONICAL_SURFACE('',#622,0.3500599520011,0.140686945962564);\n#31=CONICAL_SURFACE('',#625,0.0854901781157201,0.25326156346064);\n#32=CONICAL_SURFACE('',#639,0.107259882566625,0.253261563450098);\n#33=CONICAL_SURFACE('',#644,0.2500550224821,0.140686945962564);\n#34=CONICAL_SURFACE('',#646,0.2500550224821,0.140686945962564);\n#35=CONICAL_SURFACE('',#649,0.2500550224821,0.140686945962564);\n#36=CONICAL_SURFACE('',#652,0.2500550224821,0.140686945962564);\n#37=CONICAL_SURFACE('',#659,0.107321319983375,0.253261563452846);\n#38=CONICAL_SURFACE('',#663,0.107259881520342,0.253261563456436);\n#39=B_SPLINE_CURVE_WITH_KNOTS('',3,(#875,#876,#877,#878,#879,#880,#881,\n#882,#883,#884,#885,#886,#887,#888,#889,#890,#891,#892,#893,#894,#895,#896,\n#897,#898,#899,#900,#901,#902,#903,#904,#905,#906,#907,#908,#909,#910,#911,\n#912,#913,#914,#915,#916,#917,#918,#919,#920,#921,#922,#923,#924,#925,#926,\n#927,#928,#929,#930,#931,#932,#933,#934,#935,#936,#937,#938,#939,#940,#941,\n#942,#943,#944,#945,#946,#947),.UNSPECIFIED.,.F.,.F.,(4,3,3,3,3,3,3,3,3,\n3,3,3,3,3,3,3,3,3,3,3,3,3,3,3,4),(0.,0.0458743804394104,0.06666666666667,\n0.111053365481494,0.1333333333333,0.187608648622586,0.2,0.2666666666667,\n0.315138133753424,0.3333333333333,0.4,0.4666666666667,0.500062603112874,\n0.5333333333333,0.6,0.6666666666667,0.71505202633289,0.7333333333333,0.8,\n0.852985530890195,0.8666666666667,0.909980948728713,0.9333333333333,0.978752310399226,\n1.),.UNSPECIFIED.);\n#40=B_SPLINE_CURVE_WITH_KNOTS('',3,(#953,#954,#955,#956,#957,#958,#959,\n#960,#961,#962,#963,#964,#965,#966,#967,#968,#969,#970,#971,#972,#973,#974,\n#975,#976,#977,#978,#979,#980,#981,#982,#983,#984,#985,#986),\n .UNSPECIFIED.,.F.,.F.,(4,3,3,3,3,3,3,3,3,3,3,4),(0.,0.110670393651878,\n0.1428571428571,0.266027911824754,0.2857142857143,0.4285714285714,0.555914630849129,\n0.5714285714286,0.7142857142857,0.8571428571429,0.972337169516299,1.),\n .UNSPECIFIED.);\n#41=B_SPLINE_CURVE_WITH_KNOTS('',3,(#990,#991,#992,#993,#994,#995,#996,\n#997,#998,#999,#1000,#1001,#1002,#1003,#1004,#1005,#1006,#1007,#1008,#1009,\n#1010,#1011,#1012,#1013,#1014,#1015,#1016,#1017,#1018,#1019,#1020,#1021,\n#1022,#1023),.UNSPECIFIED.,.F.,.F.,(4,3,3,3,3,3,3,3,3,3,3,4),(0.,0.115194312373676,\n0.1428571428571,0.2857142857143,0.4285714285714,0.555914630850625,0.5714285714286,\n0.7142857142857,0.837456483254619,0.8571428571429,0.967813250795107,1.),\n .UNSPECIFIED.);\n#42=B_SPLINE_CURVE_WITH_KNOTS('',3,(#1065,#1066,#1067,#1068,#1069,#1070,\n#1071,#1072,#1073,#1074,#1075,#1076,#1077,#1078,#1079,#1080,#1081,#1082,\n#1083,#1084,#1085,#1086,#1087,#1088,#1089,#1090,#1091,#1092,#1093,#1094,\n#1095,#1096,#1097,#1098),.UNSPECIFIED.,.F.,.F.,(4,3,3,3,3,3,3,3,3,3,3,4),\n(0.,0.115194312373344,0.1428571428571,0.2857142857143,0.4285714285714,0.55591463084967,\n0.5714285714286,0.7142857142857,0.837456483253965,0.8571428571429,0.967813250794925,\n1.),.UNSPECIFIED.);\n#43=B_SPLINE_CURVE_WITH_KNOTS('',3,(#1104,#1105,#1106,#1107,#1108,#1109,\n#1110,#1111,#1112,#1113,#1114,#1115,#1116,#1117,#1118,#1119,#1120,#1121,\n#1122,#1123,#1124,#1125,#1126,#1127,#1128,#1129,#1130,#1131,#1132,#1133,\n#1134),.UNSPECIFIED.,.F.,.F.,(4,3,3,3,3,3,3,3,3,3,4),(0.,0.11760285124474,\n0.1428571428571,0.2857142857143,0.4285714285714,0.5714285714286,0.7142857142857,\n0.837110761937757,0.8571428571429,0.968740340808658,1.),.UNSPECIFIED.);\n#44=B_SPLINE_CURVE_WITH_KNOTS('',3,(#1136,#1137,#1138,#1139,#1140,#1141,\n#1142,#1143,#1144,#1145,#1146,#1147,#1148,#1149,#1150,#1151,#1152,#1153,\n#1154,#1155,#1156,#1157,#1158,#1159,#1160,#1161,#1162,#1163,#1164,#1165,\n#1166),.UNSPECIFIED.,.F.,.F.,(4,3,3,3,3,3,3,3,3,3,4),(0.,0.111620281731672,\n0.1428571428571,0.265837725142949,0.2857142857143,0.4285714285714,0.5714285714286,\n0.7142857142857,0.8571428571429,0.974754997803736,1.),.UNSPECIFIED.);\n#45=B_SPLINE_CURVE_WITH_KNOTS('',3,(#1207,#1208,#1209,#1210,#1211,#1212,\n#1213,#1214,#1215,#1216,#1217,#1218,#1219,#1220,#1221,#1222,#1223,#1224,\n#1225,#1226,#1227,#1228,#1229,#1230,#1231,#1232,#1233,#1234,#1235,#1236,\n#1237,#1238,#1239,#1240,#1241,#1242,#1243,#1244,#1245,#1246,#1247,#1248,\n#1249,#1250,#1251,#1252,#1253,#1254,#1255,#1256,#1257,#1258,#1259,#1260,\n#1261,#1262,#1263,#1264,#1265,#1266,#1267,#1268,#1269,#1270,#1271,#1272,\n#1273,#1274,#1275,#1276,#1277,#1278,#1279,#1280,#1281,#1282,#1283,#1284,\n#1285,",
  "overlaySha256": "e9df180af0ef052a653229452cd4f95943c388d5aac880a756f5533c7b6a471f",
  "overlayClassification": "AI-generated fitted identification glyph geometry, separate from original component body",
  "sourceChange": null
}