MachineContactLarge - Large Machine Contact

{
  "mpn": "MachineContactLarge",
  "wiki": "https://wiki.adom.inc/adom/machinecontactlarge",
  "source": "/home/adom/aiflow-esc-astra/components/quality-audit/provenance-snapshots/adom__machinecontactlarge/MachineContactLarge.step",
  "sourceSha256": "1b87bae840a1ab43dd3b98cfcd017ff873f2d9d85822838e634174afde1b1aff",
  "processingInputSha256": "1b87bae840a1ab43dd3b98cfcd017ff873f2d9d85822838e634174afde1b1aff",
  "rotationDegrees": 0,
  "restoredOriginalFrame": true,
  "text": "MachineContactLarge",
  "mode": "flat",
  "classification": "source-derived identification variant; marking geometry generated by Adom STEP engine",
  "generator": "Adom STEP engine 1.3.0 f02d0909",
  "reusedReviewedCache": false,
  "job": {
    "ok": true,
    "job_id": "ba3e25dc7f2c9a38",
    "status": "queued",
    "poll": "/jobs/ba3e25dc7f2c9a38",
    "result_type": "application/step",
    "client": "astra-esc-mpn",
    "job_name": "machinecontactlarge-long-axis"
  },
  "plainBoundsMm": {
    "xmin": -1.3750001,
    "xmax": 1.3750001,
    "ymin": -1.3750001,
    "ymax": 1.3750001,
    "zmin": -3.75,
    "zmax": 1e-07,
    "xlen": 2.7500002,
    "ylen": 2.7500002,
    "zlen": 3.7500001
  },
  "markedBoundsMm": {
    "xmin": -1.3750001,
    "xmax": 1.3750001,
    "ymin": -1.3750001,
    "ymax": 1.3750001,
    "zmin": -3.7500000000000524,
    "zmax": 1e-07,
    "xlen": 2.7500002,
    "ylen": 2.7500002,
    "zlen": 3.7500001000000522
  },
  "step": "/home/adom/aiflow-esc-astra/components/quality-audit/all-marked/machinecontactlarge/machinecontactlarge-mpn.step",
  "stepSha256": "43a73f991ff2cac2911dae26a5a48151da35dc7edb179414fd6cbdd7285f69e6",
  "limitations": "Identification aid, not factory marking or dimensional qualification. Tiny passives require zoom. Original geometry provenance and rights remain those of the source.",
  "review": "Contact sheet and representative closeups reviewed; geometric fit checked; native board check reported on ESC project",
  "surfaceFit": {
    "fittedTextBoundsMm": [
      0.06916329353127182,
      0.77,
      0.001
    ],
    "textCenterMm": [
      -1.2650000000000001,
      0.0,
      0.0005
    ],
    "textRotationDegrees": 270,
    "generatedTextScale": 0.3390290945880469,
    "fitRule": "Largest sampled rectangle on upper planar body face (including body below raised terminals); 86% length and 70% width maximum, both orientations compared; 1um identification geometry; sampled face containment excludes holes",
    "plainGeometryPreserved": "Original assembly retained; only separate text group added"
  },
  "colorPreservingDocument": true,
  "fitRevision": 2,
  "localGlyphFallback": false,
  "glb": "/home/adom/aiflow-esc-astra/components/quality-audit/all-marked/machinecontactlarge/machinecontactlarge-mpn.glb",
  "glbSha256": "91b5d5f739b82baa89263080d2f6b9dbb523f6c4e2317f11ac12d5e15ecc76a1",
  "png": "/home/adom/aiflow-esc-astra/components/quality-audit/all-marked/machinecontactlarge/machinecontactlarge-mpn.png",
  "pngSha256": "a19d403f2d256b53761aafc0e0ab0b2bf939b7b68512a3fa8ba2f15e698f0942",
  "publishedUtc": "2026-09-16T22:47:53.123562+00:00",
  "combinedModelPublished": true,
  "redistributionEvidence": "Adom-owned source model. Adom CEO explicitly authorized publication of these MPN-marked derivatives on 2026-09-16; see ADOM-ASSET-PERMISSION.md and adom-asset-authorization.json. Original package license is retained; this records additional permission for the marked variant, not a replacement blanket license.",
  "sourceFileHeader": "ISO-10303-21;\nHEADER;\n/* Generated by software containing ST-Developer\n * from STEP Tools, Inc. (www.steptools.com) \n */\n\nFILE_DESCRIPTION(\n/* description */ (''),\n/* implementation_level */ '2;1');\n\nFILE_NAME(\n/* name */ 'MpinContact_Large v2.step',\n/* time_stamp */ '2024-07-03T17:46:07-04:00',\n/* author */ (''),\n/* organization */ (''),\n/* preprocessor_version */ 'ST-DEVELOPER v20',\n/* originating_system */ 'Autodesk Translation Framework v13.14.0.145',\n\n/* authorisation */ '');\n\nFILE_SCHEMA (('AUTOMOTIVE_DESIGN { 1 0 10303 214 3 1 1 }'));\nENDSEC;\n\nDATA;\n#10=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#13),#1443);\n#11=SHAPE_REPRESENTATION_RELATIONSHIP('SRR','None',#1450,#12);\n#12=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#14),#1442);\n#13=STYLED_ITEM('',(#1459),#14);\n#14=MANIFOLD_SOLID_BREP('Body1',#669);\n#15=ELLIPSE('',#696,0.331638622655187,0.319176069371616);\n#16=ELLIPSE('',#697,0.387905031038936,0.37316303050884);\n#17=ELLIPSE('',#698,0.387905032227465,0.373163031120138);\n#18=ELLIPSE('',#702,0.33164082524193,0.319177218753025);\n#19=ELLIPSE('',#707,0.331640779710309,0.319177195009435);\n#20=ELLIPSE('',#710,0.331640935641867,0.319177276340737);\n#21=ELLIPSE('',#712,0.331637881132936,0.319175682314551);\n#22=ELLIPSE('',#716,0.331640792235686,0.319177201486461);\n#23=ELLIPSE('',#724,0.387907700989735,0.373164403581414);\n#24=ELLIPSE('',#725,0.387907660584102,0.373164382832445);\n#25=ELLIPSE('',#738,0.387907452075606,0.373164275677521);\n#26=ELLIPSE('',#740,0.387907801970404,0.373164455486687);\n#27=ELLIPSE('',#742,0.387907454946674,0.373164277156961);\n#28=ELLIPSE('',#743,0.387907758834108,0.373164433316451);\n#29=CONICAL_SURFACE('',#695,0.344266920537044,0.253261563454058);\n#30=CONICAL_SURFACE('',#700,0.9115475012996,0.189456145227965);\n#31=CONICAL_SURFACE('',#704,0.9115475012996,0.189456145227965);\n#32=CONICAL_SURFACE('',#708,0.9115475012996,0.189456145227965);\n#33=CONICAL_SURFACE('',#713,0.9115475012996,0.189456145227965);\n#34=CONICAL_SURFACE('',#723,0.344267353228846,0.253261563459513);\n#35=CONICAL_SURFACE('',#736,1.111580101272,0.189456145227965);\n#36=CONICAL_SURFACE('',#737,1.111580101272,0.189456145227965);\n#37=CONICAL_SURFACE('',#739,1.111580101272,0.189456145227965);\n#38=CONICAL_SURFACE('',#741,1.111580101272,0.189456145227965);\n#39=CONICAL_SURFACE('',#745,0.344266920537044,0.253261563454058);\n#40=CONICAL_SURFACE('',#748,0.344267352659389,0.253261563446452);\n#41=(\nBOUNDED_SURFACE()\nB_SPLINE_SURFACE(2,2,((#991,#992,#993),(#994,#995,#996),(#997,#998,#999)),\n .UNSPECIFIED.,.F.,.F.,.F.)\nB_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,3),(-0.1894561955205,4.16859021605822E-8),\n(-1.4384070874783,-0.132389237991879),.UNSPECIFIED.)\nGEOMETRIC_REPRESENTATION_ITEM()\nRATIONAL_B_SPLINE_SURFACE(((1.,0.794259237225687,1.),(0.995516645861366,\n0.790698291787323,0.995516645861366),(1.,0.794259237225687,1.)))\nREPRESENTATION_ITEM('')\nSURFACE()\n);\n#42=(\nBOUNDED_SURFACE()\nB_SPLINE_SURFACE(2,2,((#1023,#1024,#1025),(#1026,#1027,#1028),(#1029,#1030,\n#1031)),.UNSPECIFIED.,.F.,.F.,.F.)\nB_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,3),(-0.189456056909846,9.37788162812183E-8),\n(-3.0092034154449,-1.70318556483186),.UNSPECIFIED.)\nGEOMETRIC_REPRESENTATION_ITEM()\nRATIONAL_B_SPLINE_SURFACE(((1.,0.794259236883431,1.),(0.995516649952954,\n0.790698294696383,0.995516649952954),(1.,0.794259236883431,1.)))\nREPRESENTATION_ITEM('')\nSURFACE()\n);\n#43=(\nBOUNDED_SURFACE()\nB_SPLINE_SURFACE(2,2,((#1055,#1056,#1057),(#1058,#1059,#1060),(#1061,#1062,\n#1063)),.UNSPECIFIED.,.F.,.F.,.F.)\nB_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,3),(-0.189456232353665,-7.31548194547269E-8),\n(0.132389239073805,1.43840708761081),.UNSPECIFIED.)\nGEOMETRIC_REPRESENTATION_ITEM()\nRATIONAL_B_SPLINE_SURFACE(((1.,0.794259237514109,1.),(0.995516649550572,\n0.790698295004638,0.995516649550572),(1.,0.794259237514109,1.)))\nREPRESENTATION_ITEM('')\nSURFACE()\n);\n#44=(\nBOUNDED_SURFACE()\nB_SPLINE_SURFACE(2,2,((#1087,#1088,#1089),(#1090,#1091,#1092),(#1093,#1094,\n#1095)),.UNSPECIFIED.,.F.,.F.,.F.)\nB_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,3),(-0.189456168846487,6.61401830158978E-8),\n(1.70318556470191,3.00920341436036),.UNSPECIFIED.)\nGEOMETRIC_REPRESENTATION_ITEM()\nRATIONAL_B_SPLINE_SURFACE(((1.,0.794259237173426,1.),(0.995516645966335,\n0.790698291818668,0.995516645966335),(1.,0.794259237173426,1.)))\nREPRESENTATION_ITEM('')\nSURFACE()\n);\n#45=(\nBOUNDED_SURFACE()\nB_SPLINE_SURFACE(2,2,((#1220,#1221,#1222),(#1223,#1224,#1225),(#1226,#1227,\n#1228)),.UNSPECIFIED.,.F.,.F.,.F.)\nB_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,3),(-0.189456045487865,1.00579467000121E-7),\n(-2.8797932662886,-1.71310356773847),.UNSPECIFIED.)\nGEOMETRIC_REPRESENTATION_ITEM()\nRATIONAL_B_SPLINE_SURFACE(((1.,0.834624916690861,1.),(0.995516650171539,\n0.830883001213785,0.995516650171539),(1.,0.834624916690861,1.)))\nREPRESENTATION_ITEM('')\nSURFACE()\n);\n#46=(\nBOUNDED_SURFACE()\nB_SPLINE_SURFACE(2,2,((#1243,#1244,#1245),(#1246,#1247,#1248),(#1249,#1250,\n#1251)),.UNSPECIFIED.,.F.,.F.,.F.)\nB_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,3),(-0.189456193835124,4.75261552016503E-8),\n(-1.42848908427494,-0.142307240814901),.UNSPECIFIED.)\nGEOMETRIC_REPRESENTATION_ITEM()\nRATIONAL_B_SPLINE_SURFACE(((1.,0.800246044929686,1.),(0.995516645664852,\n0.796658258354965,0.995516645664852),(1.,0.800246044929686,1.)))\nREPRESENTATION_ITEM('')\nSURFACE()\n);\n#47=(\nBOUNDED_SURFACE()\nB_SPLINE_SURFACE(2,2,((#1264,#1265,#1266),(#1267,#1268,#1269),(#1270,#1271,\n#1272)),.UNSPECIFIED.,.F.,.F.,.F.)\nB_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,3),(-0.189456172783828,6.69571684792711E-8),\n(1.71310356755452,2.99928541110799),.UNSPECIFIED.)\nGEOMETRIC_REPRESENTATION_ITEM()\nRATIONAL_B_SPLINE_SURFACE(((1.,0.800246044901675,1.),(0.995516645741463,\n0.796658258388387,0.995516645741463),(1.,0.800246044901675,1.)))\nREPRESENTATION_ITEM('')\nSURFACE()\n);\n#48=(\nBOUNDED_SURFACE()\nB_SPLINE_SURFACE(2,2,((#1314,#1315,#1316),(#1317,#1318,#1319),(#1320,#1321,\n#1322)),.UNSPECIFIED.,.F.,.F.,.F.)\nB_SPLINE_SURFACE_WITH_KNOTS((3,3),(3,3),(-0.189456237015512,-8.29062058025627E-8),\n(0.261799378395245,1.42848908446347),.UNSPECI",
  "overlaySha256": "c077f4fa5e52f1bd3ee11efe51d7e9555bad839a75ad9f8e131f3a3163c26f69",
  "overlayClassification": "AI-generated fitted identification glyph geometry, separate from original component body",
  "sourceChange": null
}