Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MA710GQ-Z

MPS · Current Sensors · QFN-16(3x3)

MA710GQ-Z from MPS, in a QFN-16(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SSD output SSI serial data output (Data out (SSI)).
2 A output Incremental ABZ output A.
3 Z output Incremental ABZ output Z.
4 MOSI input SPI data input with an internal pull-down resistor.
5 CS input SPI chip select input with an internal pull-up resistor.
6 B output Incremental ABZ output B.
7 MISO output SPI data output with an internal pull-down resistor that is enabled in the high-impedance state.
8 GND power_in Supply ground.
9 PWM output PWM output.
10 TEST passive Connect to ground.
11 MGL output Digital output indicating field strength below the MGLT level.
12 SCLK input SPI clock input with an internal pull-down resistor.
13 VDD power_in Supply 3.3V.
14 NC unconnected No connection; leave unconnected.
15 SSCK input SSI clock input with an internal pull-down resistor.
16 MGH output Digital output indicating field strength above the MGHT level.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer MPS
Package QFN-16(3x3)
Category Sensors
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VDD 3 3.3 3.6 V 4
Supply current IDD 10.2 11.7 13.8 mA From -40°C to +125°C 4
Operating temperature Top -40 125 °C 4
Applied magnetic field B 15 60 mT 4
Supply voltage -0.5 4.6 V 3
Input pin voltage VI -0.5 6 V 3
Output pin voltage VO -0.5 4.6 V 3
Continuous power dissipation 2 W TA = +25°C 3
Junction temperature 125 °C 3
Storage temperature -65 150 °C 3
Effective resolution 12 12.8 13.8 bits 3σ deviation of the noise distribution 5
Effective resolution at 15mT 10.5 11 11.5 bits 3σ deviation of the noise distribution 5
Noise RMS 0.004 0.008 0.015 deg 5
Refresh rate 850 980 1100 kHz 5
Data output length 14 14 bit 5
Latency 8 10 10 µs Constant speed propagation delay 5
Temperature induced drift at room temperature 0.015 0.04 deg/°C 5
Temperature induced variation 0.5 1.2 deg From 25°C to 85°C 5
Temperature induced variation 1 2.1 deg From 25°C to 125°C 5
Resolution - edges per turn 4 1024 Programmable 5
Pulses per channel per turn PPT+1 1 256 Programmable 5
PWM frequency Fpwm 204 240 264 Hz 5
PWM resolution 11 11.8 12 bits 5
Input high voltage VIH 2.5 5.5 V 6
Input low voltage VIL -0.3 0.8 V 6
Pull-up resistor RPU 46 66 97 kΩ 6
Pull-down resistor RPD 43 55 97 kΩ 6
Power-up time 60 ms 5
Filter cutoff frequency Fcutoff 93 Hz 5
INL at 25°C 0.7 deg At room temperature over the full field range 5
INL between -40°C to +125°C 1.1 deg Over the full temperature range and field range 5
Magnetic field induced 0.005 deg/mT 5
Voltage supply induced 0.3 deg/V 5
ABZ update rate 16 MHz 5
ABZ hysteresis H 0.7 deg 5
Systematic jitter 13 % For PPT = 255, between 0 and 100krpm, up to 60mT 5
Systematic jitter 7 % For PPT = 127, between 0 and 100krpm 5
Random jitter (3σ) 5.5 % For PPT = 255, between 0 and 100krpm 5
Random jitter (3σ) 2.8 % For PPT = 127, between 0 and 100krpm 5
Overall ABZ jitter 0.3 deg Up to 60mT 5
Magnetic field detection accuracy 5 mT 6
Magnetic field hysteresis MagHys 6 mT 6
Magnetic threshold temperature drift -600 ppm/°C 6
Output low voltage VOL 0.4 V IOL = 4mA 6
Output high voltage VOH 2.4 V IOH = 4mA 6
Rising edge slew rate TR 0.7 V/ns CL = 50pF 6
Falling edge slew rate TF 0.7 V/ns CL = 50pF 6
Junction-to-ambient thermal resistance θJA 50 °C/W Measured on JESD51-7, 4-layer PCB 3
Junction-to-case thermal resistance θJC 12 °C/W 3

CAD (KiCad official)

  • Symbol: MA710GQ-Z
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: QFN-16(3x3) (KiCad packages3D, STEP)
  • 3D model files: ma710gq-z-etched.step / ma710gq-z-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ma710gq-z.step / ma710gq-z.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: MPS datasheet (29 pp, sha256 746a244f60b5fb31, retrieved 2026-11-02, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF