component
MA600GQE-0000-Z
Public Made by Adomby adom
Monolithic Power Systems Others, QFN-16-EP(3x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMA600GQE-0000-Z
Monolithic Power Systems · Others · QFN-16-EP(3x3)
MA600GQE-0000-Z from Monolithic Power Systems, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IO1 | bidirectional | Digital I/O 1 is bidirectional and push-pull by default (configurable as open drain via OD615), and should be left floating if not used. |
| 2 | IO2 | bidirectional | Digital I/O 2 is bidirectional and push-pull by default (configurable as open drain via OD243), and should be left floating if not used. |
| 3 | IO3 | bidirectional | Digital I/O 3 is bidirectional and push-pull by default (configurable as open drain via OD243), and should be left floating if not used. |
| 4 | COPI | input | SPI data in is pulled down internally, can be set to high impedance via SPULLIN, and should be connected to GND if not used. |
| 5 | /CS | input | SPI chip select is pulled up internally, can be set to high impedance via SPULLIN, and should be connected to DVDD if not used. |
| 6 | IO4 | bidirectional | Digital I/O 4 is bidirectional and push-pull by default (configurable as open drain via OD243), and should be left floating if not used. |
| 7 | CIPO | tri_state | SPI data out is push-pull while SPI is active and pull-down when idle (or high impedance when idle if TRISTATE is set), and should be left floating if not used. |
| 8 | GND | power_in | Supply ground. |
| 9 | IO5 | bidirectional | Digital I/O 5 is bidirectional and push-pull by default (configurable as open drain via OD615), and should be left floating if not used. |
| 10 | TEST | input | Test pin that must be connected to GND. |
| 11 | CK100 | output | Clock output reference for speed calculation at 100kHz, and should be left floating if not used. |
| 12 | SCLK | input | SPI clock is pulled down internally, can be set to high impedance via SPULLIN, and should be connected to GND if not used. |
| 13 | DVDD | power_in | Digital supply of 3.3V (3V to 3.6V recommended), to be bypassed to GND with a low-ESR 0.1µF capacitor. |
| 14 | AVDD | power_in | Analog supply of 3.3V (3V to 3.6V recommended), to be bypassed to GND with a low-ESR 1µF capacitor. |
| 15 | IO6 | bidirectional | Digital I/O 6 is bidirectional and push-pull by default (configurable as open drain via OD615), and should be left floating if not used. |
| 16 | NC | unconnected | No connection. |
| 17 | E-PAD | unconnected | Exposed pad is no connection and should be left floating to minimize mechanical stress. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Monolithic Power Systems |
| Package | QFN-16-EP(3x3) |
| Category | Others |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (VAVDD, VDVDD) | VAVDD, VDVDD | -0.5 | 4.6 | V | 5 | ||
| Input pin voltage | VI | -0.5 | 6 | V | 5 | ||
| Output pin voltage | VO | -0.5 | 6 | V | 5 | ||
| Continuous power dissipation | 2 | W | TA = 25°C | 5 | |||
| Operating temperature | -40 | 125 | °C | 5 | |||
| Maximum magnetic field | 200 | mT | 5 | ||||
| ESD Human body model (HBM) | -2 | 2 | kV | Human body model (HBM) | 5 | ||
| ESD Charged-device model (CDM) | -2 | 2 | kV | Charged-device model (CDM) | 5 | ||
| Supply voltage VAVDD | VAVDD | 3 | 3.3 | 3.6 | V | 6 | |
| Supply voltage VDVDD | VDVDD | 3 | 3.3 | 3.6 | V | 6 | |
| Operating junction temperature | TJ | -40 | 125 | °C | 5 | ||
| Supply current | IAVDD + IDVDD | 5.5 | 7.5 | 9.5 | mA | TA = 25°C | 6 |
| Input low voltage | VIL | -0.3 | 0.8 | V | 6 | ||
| Operating temperature | TOP | -40 | 125 | °C | 7 | ||
| Applied magnetic field (optimal linearity) | B | 20 | 80 | mT | Optimal linearity | 7 | |
| Applied magnetic field (functional) | B | 10 | 150 | mT | Functional | 7 | |
| Refresh rate | fREFRESH | 780 | 800 | 820 | kHz | TA = 25°C | 7 |
| PWM frequency (PWMF = 0) | fPWM | 243 | 250 | 257 | Hz | PWMF = 0, TA = 25°C | 7 |
| PWM frequency (PWMF = 1) | fPWM | 0.975 | 1 | 1.025 | kHz | PWMF = 1, TA = 25°C | 7 |
| Latency (added time beyond refresh time), FW = 5 to 12 | L | -0.5 | 0.5 | µs | FW = 5 to 12 | 7 | |
| CK100 clock frequency | 98 | 100 | 102 | kHz | TA = 25°C | 8 |
CAD (KiCad official)
- Symbol:
MA600GQE-0000-Z - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
ma600gqe-0000-z-etched.step/ma600gqe-0000-z-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ma600gqe-0000-z.step/ma600gqe-0000-z.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Monolithic Power Systems datasheet (44 pp, sha256
20610b9f0be5e277, retrieved 2026-10-17, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).